All Categories

Power Generation and Distribution Machinery and Accessories

Electrical Wire And Cable And Harness

Subcategories

    Electrical Cable And Accessories

    Electrical wire

    Wiring harness

Showing 4645-4656 of 16,831 results

C2G 29858 - 6IN 12PK VELCRO CABLE STRAPS BLACK
C2G

29858


6IN 12PK VELCRO CABLE STRAPS BLACK

Contact for Pricing

C2G 36123 - 3M 10 GB LC/ST 50/125 MM FIBER

3M 10 GB LC/ST 50/125 MM FIBER

Contact for Pricing

C2G 41200 - 15FT DVI-D PLENUM M/M CABLE

15FT DVI-D PLENUM M/M CABLE

Contact for Pricing

C2G 42236 - USB Powered HDMI Power Inserte

USB Powered HDMI Power Inserte

Contact for Pricing

C2G 50211 - 3" SEL VGA Video MM Cable

3" SEL VGA Video MM Cable

Contact for Pricing

ABB - Installation Products A58 - Stud Mount Transformer Connector Adapter - for Stud Thread 5/8-11, Flat Sided. Set Screws in SCU connector are tightened down on Flat side of Adapter to keep it in place.
ABB - Installation Products · ABB

A58


Stud Mount Transformer Connector Adapter - for Stud Thread 5/8-11, Flat Sided. Set Screws in SCU connector are tightened down on Flat side of Adapter to keep it in place.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products 274J2-5 - 25kV 200 Amp, Loadbreak 2-point Junction With U Straps
ABB - Installation Products · ABB

274J2-5


25kV 200 Amp, Loadbreak 2-point Junction With U Straps

Contact for Pricing

Panduit NUC6CR04BU-ME - Category 6 U/UTP copper cable shall meet ANSI/TIA-568.2-E Category 6 and ISO 11801 Class E channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and covered by a flame-retardant PVC (CM) jacket.

Category 6 U/UTP copper cable shall meet ANSI/TIA-568.2-E Category 6 and ISO 11801 Class E channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and covered by a flame-retardant PVC (CM) jacket.

Contact for Pricing

Minimum Qty: 14

Multiplier: 14

*Contact for lower quantities*

Panduit PUC6004BU-ME - Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame retardant PVC (CM) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame retardant PVC (CM) jacket.

Contact for Pricing

Minimum Qty: 24

Multiplier: 24

*Contact for lower quantities*

Panduit PUC6C04BU-FE - The TX6™ Cat 6 copper cable is constructed of 24 AWG copper conductors with high-density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and separated by a cross divider and covered by a flame retardant PVC (CM) blue jacket.

The TX6™ Cat 6 copper cable is constructed of 24 AWG copper conductors with high-density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and separated by a cross divider and covered by a flame retardant PVC (CM) blue jacket.

Contact for Pricing

Minimum Qty: 24

Multiplier: 24

*Contact for lower quantities*

Panduit PUL3025IG-V - The TX3000™ Cat 3 U/UTP LSZH 25-pair copper cable is constructed of 26 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a flame retardant HDPE (LSZH), Gray jacket. Packaged 1000 ft./305m on a reel.

The TX3000™ Cat 3 U/UTP LSZH 25-pair copper cable is constructed of 26 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a flame retardant HDPE (LSZH), Gray jacket. Packaged 1000 ft./305m on a reel.

Contact for Pricing

Minimum Qty: 10

Multiplier: 5

*Contact for lower quantities*

Panduit PUL6004BL-ME - Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-E Category 6 component standards. The conductors shall be 23 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider, and all four pairs shall be covered by a LSZH jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-E Category 6 component standards. The conductors shall be 23 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider, and all four pairs shall be covered by a LSZH jacket.

Contact for Pricing

Minimum Qty: 24

Multiplier: 24

*Contact for lower quantities*

Showing 4645-4656 of 16,831 results