Showing 3025-3036 of 3,320 results

ABB - Installation Products · ABB · Spec-Kon
TV18-6LF-XV
Vinyl Insulated Locking Fork Terminal, Wire Range 22-16, Stud size #6, Red, Canister of 15 terminals
Contact for Pricing
Minimum Qty: 900
Multiplier: 900
*Contact for lower quantities*

ABB - Installation Products · ABB · Shield-Kon
K3/0-38R-L
Non-Insulated Ring Terminal Wire Range 3/0 Bolt Hole 3/8
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

ABB - Installation Products · ABB · Spec-Kon
K10-8F-M
Non-Insulated Fork Terminal Wire Connector - Wire Range 12-10 AWG, Bolt Hole #8, Wire Strip Length .38 Inch
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

ABB - Installation Products · ABB
SA 6 N
Aluminum Two-Hole NEMA Lugs - straight lug, #6 ACSR, #6 Compressed , #4 Solid - Compact. Installing dies TU, 52, BG, 243, 5/8, CSA22. Length 5-1/8 inch. Pad 7/8 inch wide x 3-1/16 inch long x 7/32 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch center. Barrel 1-15/32 inch. Oxide Inhibitor. Blue Cap. Dual Rated for Aluminum and Copper Conductors
Contact for Pricing
Minimum Qty: 200
Multiplier: 200
*Contact for lower quantities*

ABB - Installation Products · ABB
UYO 04 SP
Aluminum 2-3/4 inch Service Entrance Compression Splice for Wire Range, End A: 1/0 ACSR, 1/0 STR, Orange, End B: 4 ACSR, 3-4 Stranded, 2 Solid, Orange, Die: 5/8, with Seal Plug.
Contact for Pricing
Minimum Qty: 2500
Multiplier: 2500
*Contact for lower quantities*

ABB - Electrification · ABB
LT65-30
The main terminals, equipped with compression lugs or cable clamps, can be protected against accidental direct contact after wiring (EN 50274) by the addition of terminal shrouds (see table below).
Contact for Pricing

ABB - Electrification · ABB
LT52-40
The main terminals, equipped with compression lugs or cable clamps, can be protected against accidental direct contact after wiring (EN 50274) by the addition of terminal shrouds (see table below).
Contact for Pricing

ABB - Electrification · ABB
LT80-40
The main terminals, equipped with compression lugs or cable clamps, can be protected against accidental direct contact after wiring (EN 50274) by the addition of terminal shrouds (see table below).
Contact for Pricing

Contact for Pricing

Ring Tongue Terminal 0.26 to 1.5 mm / M4 - 22 to 16 AWG / MIL 8 - Red
Contact for Pricing

Spade Terminal 1.5 to 2.5 mm / M4 - 16 to 14 AWG / MIL 8 - Blue
Contact for Pricing

Ring Tongue Terminal 0.26 to 1.5 mm / M5 - 22 to 16 AWG / MIL 10 - Red
Contact for Pricing