Showing 217-228 of 66,285 results

Littelfuse · Relay Series
S75-M16A-20030
RELAY ELEC MPU CABLE MPU/ICT 6C CONNECT. MPU-CIM to MPU-32 Interconnect Cable, 6 m (19’) Included with MPU-CIM.
Contact for Pricing

SE-325DN is a neutral-grounding resistor monitor with a supply voltage of 120 ac-dc and a ground-fault trip level of 0.5–4.0 A.
Contact for Pricing

SE-325DSNT is a neutral-grounding resistor monitor with a supply voltage of 120 ac-dc and a ground-fault trip level of 0.5–4.0 A.
Contact for Pricing

Littelfuse · Relay Series
T7900.0030
Electronic Potentiometer. 230V AC. The T7900 Electronic Potentiometer is typically used as an interface between a unit that provides increase/decrease contacts signals and electronic speed governors or voltage regulators (AVR) controlled by analogue voltage or current signals. The T7900 works much like a conventional motorized potentiometer (e.g. the E7800). However, instead of a variable resistance, the T7900 provides a variable voltage (e.g. -5 to +5 VDC), current (e.g. 4-20 mA) or a pulse width modulated signal (PWM). The voltage and current range is programmable. The PWM output provides a 500 Hz signal with programmable duty cycle. The analogue outputs are galvanically isolated.
Contact for Pricing

Littelfuse · G3000 Series
G3600.0010
G3600 Voltage Relay. 24V DC. The G-Line relays are mainly intended for use in land-based applications. The G-Line relays provide an efficient solution for applications where flexibility and cost of purchase are the main issues. G-Line relays provide high quality, proper measuring techniques and a vast number of programmable options.
Contact for Pricing

Littelfuse · E7800 Series
E7800.0770
Motorized Potentiometer24VDC,10 turn,10k. The E7800 Motorized Potentiometer is typically used as an interface between increase/decrease relay contacts (or push buttons) and a device requiring control by an external potentiometer (e.g. the speed trim of an electronic governor). All three wires of the potentiometer are directly accessible on external connection terminals, thus providing the best possible flexibility for almost any application. A special version of the E7800 with DC voltage output is also available. The DC output voltage follows the position of the potentiometer. The design of the E7800 ensures that the potentiometer will “remember” its position although supply is lost
Contact for Pricing

Littelfuse · E7800 Series
E7800.0720
Motorized Potentiometer24VDC, 10turn,100. The E7800 Motorized Potentiometer is typically used as an interface between increase/decrease relay contacts (or push buttons) and a device requiring control by an external potentiometer (e.g. the speed trim of an electronic governor). All three wires of the potentiometer are directly accessible on external connection terminals, thus providing the best possible flexibility for almost any application. A special version of the E7800 with DC voltage output is also available. The DC output voltage follows the position of the potentiometer. The design of the E7800 ensures that the potentiometer will “remember” its position although supply is lost
Contact for Pricing

Littelfuse · M4100 Series
M4100.0020
Alarm Annunciator. Alarm annunciator. Compact unit for flush mounting. 8 input contacts normally open or normally closed. Time delays 50 msec. - 15 sec. individually selectable on all channels. One common output relay for sirenand two programmable output relays for alarms with voltage free contacts. LED color change through plug-in system. Plug-in terminal block for easy service. Two integrated push buttons for siren reset/lamp test and alarm accept. DC or AC supply voltage. Remote individual selectable blocking with adjustable unblocking delay 1 - 15 sec. External dimming possibilities.
Contact for Pricing

SE-325S is a neutral-grounding resistor monitor with a supply voltage of 120 ac and a ground-fault trip level of 0.5–4.0 A.
Contact for Pricing

Contact for Pricing

Contact for Pricing

Contact for Pricing