Manufacturers
Showing 1-12 of 1200+ results
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.
Contact for Pricing
Minimum Qty: 1200
Multiplier: 1200
*Contact for lower quantities*
Panduit
LCMA6-8-C
One-hole, metric conductor, standard barrel with window lug, 4-6mm wire, M8 stud hole.
Contact for Pricing
Minimum Qty: 100
Multiplier: 1
*Contact for lower quantities*
ABB - Installation Products
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
ABB - Installation Products
675-51973
Non-Insulated Copper Butt Splice, Wire Marking Navy 6-9/12-9 AWG, Length 0.81
Contact for Pricing
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.
Contact for Pricing
Minimum Qty: 1200
Multiplier: 1200
*Contact for lower quantities*
mPmĀ® DIN Valve Connector, Type A, 3 Pole, Terminal No Tails, Black Silicone Gasket
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
ABB - Installation Products
FP14SD
Female contact, 14 AWG. For use with D series crimp terminal inserts
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Find all the features of the ZK2.5 terminal block with the added option of distributing or branching 3 conductors.
Contact for Pricing
Minimum Qty: 750
Multiplier: 750
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
NSI Industries
IT-4
The Polaris IT-4 Multi-Tap Single-Side Entry Connector features 2 ports sized for 4 AWG to 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 12
Multiplier: 12
*Contact for lower quantities*
Contact for Pricing
Contact for Pricing
Showing 1-12 of 1200+ results
