VJ Series Back Mounting Plate 18x16x.25 Brown Nonmetallic

VJ Series Back Mounting Plate 14x12x.25 Brown Nonmetallic

VJ Series Back Mounting Plate 16x14x.10 Light Gray Mild Steel

VJ Series Back Mounting Plate 14x12x.10 Light Gray Mild Steel

VJ Series Back Mounting Plate 18x16x.10 Light Gray Mild Steel

VJ Series Back Mounting Plate 6x6x.25 Brown Nonmetallic

Multi-Way Switch, Single-Sided Padmount, 1-Phase, 15kV/12.5kA, 4-Point Junction, Point 1: Solid Tap with 600 Amp Interface, Point 2: Solid Tap with 600 Amp Interface, Point 3: MVS1 with 600 Amp Main-body Interface, Point 4: Solid Tap with 600 Amp Interface

Multi-Way, Double-Sided Padmount, 38 kV/12.5 kA, 2-Way, 1-Source Way, Source Component: MVS3 with 600 Amp Bushings, Source Control None, No Load Way, Enclosure: Galvanized Steel, Munsell Green 7GY 3.29/1.5 and Round Ground Bar, English Labels and Instructions

Tru-Break Module, 27 kV/20 kA, 125 KV BIL, 50/60 Hz, MVS3 Compatible, No Electronic Interlock, No Motor, 600 Amp Interfaces, Included: (1) Ground Connector, (1) Ground Cable, (1) Linkage Kit, (1) Mounting Clips Kit, (1) Switch Handle, (3) Basic Insulating Plug with Caps, (3) Studs. Depth 21 inch, Width 20-1/4 inch, Height 28 inch approx. Temperature Range -40 to +65 Decrees C. Construction Submersible, Corrosion Resistant, Fully Shielded. Meets Standards IEEE C37.74, IEEE 386.

Tru-Break Module, Nominal Voltage: 27 kV, Withstand Current: 20 kA (SYM), Continuous Current: 600 Amps, Handle Position: Right, Mating Device: MVS3, Electrical Interlock: DC

Single-Sided Padmount, 3 Phase, 15kV/12.5kA, 4-Point Junction, Point 1: MVS1 with 600 Amp Main-Body Interface, Point 2: MVS1 with 600 Amp Main-Body Interface, Point 3: Solid Tap with 600 Amp Interface, Point 4: Solid Tap with 600 Amp Interface

Label with (CFE) this is used on a system that carries current. Dark Green Letters on White Background Label 4 inch wide x 3 inch tall. Letters 2.50 inch high. Heavy Duty Laminated Characters, Mylar Polyester Laminated Vinyl. Helvetica Font-Style Letters.