All Categories

Power Generation and Distribution Machinery and Accessories

Electrical Wire And Cable And Harness

Electrical Cable And Accessories

Subcategories

    Cable Accessories

    Cable Reels

    Coaxial Cable

    Communication Cable Assembly

    Control Cable

    Copper Cable

    Cord/Cable Management Device

    Crimping materials

    Electrical Cord Assembly

    Fiber Optic Cable

    Fiber Optic Cable Assembly

    Flame Retardant Fiber Optic Cable

    Heating cable

    High Voltage Cable Termination Kit

    Network Cable

    Oil Resistant SO Cable

    Power Cable

    Power Cord

    Ribbon Or Flat Cable

    Signal Cable

    Submarine cable

Showing 349-360 of 537 results

Panduit PUR6C04OR-WZ - Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.
Panduit

PUR6C04OR-WZ

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Contact for Pricing

Minimum Qty: 36000

Multiplier: 1000

*Contact for lower quantities*

Panduit PUR6C04IG-WZ - Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.
Panduit

PUR6C04IG-WZ

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Contact for Pricing

Minimum Qty: 12000

Multiplier: 1000

*Contact for lower quantities*

Panduit PUR6C04BU-WZ - Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.
Panduit

PUR6C04BU-WZ

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Contact for Pricing

Minimum Qty: 12000

Multiplier: 1000

*Contact for lower quantities*

Panduit PUR6C04GR-WZ - Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.
Panduit

PUR6C04GR-WZ

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Contact for Pricing

Minimum Qty: 36000

Multiplier: 1000

*Contact for lower quantities*

Panduit PUR6C04BL-WZ - Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.
Panduit

PUR6C04BL-WZ

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Contact for Pricing

Minimum Qty: 12000

Multiplier: 1000

*Contact for lower quantities*

Panduit PUR6C04YL-WZ - Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.
Panduit

PUR6C04YL-WZ

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Contact for Pricing

Minimum Qty: 12000

Multiplier: 1000

*Contact for lower quantities*

Panduit NUC5C04BU-CE - The NK5e™ Cat 5e U/UTP CM copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant PVC (CM), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.
Panduit

NUC5C04BU-CE

The NK5e™ Cat 5e U/UTP CM copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant PVC (CM), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.

Contact for Pricing

Minimum Qty: 24

Multiplier: 24

*Contact for lower quantities*

Panduit NUC5C04BU-ME - Category 5e cable shall meet ANSI/TIA-568.2-E Category 5e and ISO 11801 Class D channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and all four pairs shall be covered by flame retardant PVC (CM) jacket.
Panduit

NUC5C04BU-ME

Category 5e cable shall meet ANSI/TIA-568.2-E Category 5e and ISO 11801 Class D channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and all four pairs shall be covered by flame retardant PVC (CM) jacket.

Contact for Pricing

Minimum Qty: 24

Multiplier: 24

*Contact for lower quantities*

Panduit NUC5C04IG-ME - Category 5e cable shall meet ANSI/TIA-568.2-E Category 5e and ISO 11801 Class D channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and all four pairs shall be covered by flame retardant PVC (CM) jacket.
Panduit

NUC5C04IG-ME

Category 5e cable shall meet ANSI/TIA-568.2-E Category 5e and ISO 11801 Class D channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and all four pairs shall be covered by flame retardant PVC (CM) jacket.

Contact for Pricing

Minimum Qty: 24

Multiplier: 24

*Contact for lower quantities*

Panduit NUC6C04BU-FE - The NK6™ Cat 6 copper cable is constructed of 24 AWG copper conductors with high-density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and separated by a cross divider and covered by a flame retardant PVC (CM) Intl. Blue jacket.
Panduit

NUC6C04BU-FE

The NK6™ Cat 6 copper cable is constructed of 24 AWG copper conductors with high-density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and separated by a cross divider and covered by a flame retardant PVC (CM) Intl. Blue jacket.

Contact for Pricing

Minimum Qty: 24

Multiplier: 24

*Contact for lower quantities*

Panduit NUC6C04WH-FE - The NK6™ Cat 6 copper cable is constructed of 24 AWG copper conductors with high-density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and separated by a cross divider and covered by a flame retardant PVC (CM) Intl. White jacket.
Panduit

NUC6C04WH-FE

The NK6™ Cat 6 copper cable is constructed of 24 AWG copper conductors with high-density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and separated by a cross divider and covered by a flame retardant PVC (CM) Intl. White jacket.

Contact for Pricing

Minimum Qty: 24

Multiplier: 24

*Contact for lower quantities*

Panduit NUC6CR04BU-ME - Category 6 U/UTP copper cable shall meet ANSI/TIA-568.2-E Category 6 and ISO 11801 Class E channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and covered by a flame-retardant PVC (CM) jacket.
Panduit

NUC6CR04BU-ME

Category 6 U/UTP copper cable shall meet ANSI/TIA-568.2-E Category 6 and ISO 11801 Class E channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and covered by a flame-retardant PVC (CM) jacket.

Contact for Pricing

Minimum Qty: 14

Multiplier: 14

*Contact for lower quantities*

Showing 349-360 of 537 results