Showing 85-96 of 934 results

Panduit
FOVRA2X2YL
2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 90 downward angle from a straight horizontal run. Used with inside vertical 90 angle fitting FIVRA2X2YL or FIVRA4X4YL to change level of straight horizontal runs. Cover included.
Contact for Pricing

Panduit
FITF6X4
Metal fitting attaches to end of channel or fitting to transition up to four pieces of solid 1.5 (38mm) inside diameter inner duct. Hardware is included for installation. Black color only.
Contact for Pricing

Panduit
F14PN-L
1/4" plastic bolts and hex nuts fastens channel and fittings together for added strength and rigidity.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

Panduit
FR12USB
Used to support the 12x4 system by attaching to underfloor pedestals. (Contains all necessary hardware.) Use on pedestals up to 2" in diameter. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.
Contact for Pricing

Panduit
FRTSC12W6YL
Optional split cover for the horizontal tee with 6x4 exit fitting FRT12X4W6YL. Snap-on feature allows cover to be installed and removed without tools. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.
Contact for Pricing

Panduit
FRCR12BL-X
Cable retainer holds cable in the channel when cover is not used. Install anywhere on channel, near the coupler or every 18 (457mm). Black color only. 12 x 4 System.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Panduit
FRRF126RSCYL
The optional split cover for the transition right reducer fitting FRRF126RYL is yellow and made of ABS plastic. The snap-on feature allows the cover to be installed and removed with no tools required. It creates a radiused 1/2" (12.7mm) opening for easy access to add or remove cables.
Contact for Pricing

Panduit
FRFWCSC12YL
Optional split cover for the four way cross fitting FRFWC12X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.
Contact for Pricing

Panduit
FR12ACB58
Used to support the 12x4 system from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 5/8in threaded rod.
Contact for Pricing

Panduit
FR12CS12
Used to support the 12x4 system from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the top of cabinets, For 1/2in threaded rod.
Contact for Pricing

Panduit
FR12CS58M
Used to supporting the 12x4 system from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps. Also can be secured directly to the top of cabinets.
Contact for Pricing

Panduit
FREC12X4YL
The FiberRunner End Cap Fitting is used in cable management to close off open ends of the channel or fittings. The FiberRunner End Cap Fitting is a push-on installation and does not require a coupler.
Contact for Pricing