Showing 37-48 of 934 results

Panduit
FRTEL4
Fitting that transitions from Telect's 4x4 WaveTrax System to 4x4 FiberRunner System. Fitting has a black finish and is made from metal. Attachment hardware is included.
Contact for Pricing

Panduit
FRT6X4BL
The FiberRunner 6x4 Horizontal Tee attaches to the 6x4 channel and/or fittings to create a 90 horizontal branch from a straight horizontal run.
Contact for Pricing

Panduit
FTR4X4BL
Used to limit the bend radius of the cable to 2 (50.8mm) when exiting from a 4x4 or 6x4 FiberRunner Vertical Tee and 4x4 Fiber-Duct Fittings, Black.
Contact for Pricing

Panduit
FROV45SC6YL
Optional split cover for the outside vertical 45 angle fitting FROV456X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.
Contact for Pricing

Panduit
FR6TRBN58M
Used to support the 6x4 and 4x4 systems from any new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 16mm Threaded Rod.
Contact for Pricing
Minimum Qty: 20
Multiplier: 1
*Contact for lower quantities*

Panduit
FRRASC12YL
The FiberRunner Horizontal Right-Angle Split Cover is used for the 12x4 horizontal right-angle fitting within a cable routing system. It has a snap-on feature that allows the cover to be installed and removed with no tools required. The horizontal right-angle split cover creates a radiused 0.750 (19mm) opening for easy access to add or remove cables.
Contact for Pricing

Panduit
FRT12X4YL
The FiberRunner 12x4 Horizontal Tee attaches to the 12x4 channel and/or fittings to create a 90 horizontal branch with a 12x4 exit from a straight horizontal run.
Contact for Pricing

Panduit
FRT4X4YL
The FiberRunner 4x4 Horizontal Tee attaches to the 4x4 channel and/or fittings to create a 90 horizontal branch from a straight horizontal run.
Contact for Pricing

Panduit
FRFWCSC4YL
Optional split cover for the four way cross fitting FRFWC4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.
Contact for Pricing

Panduit
FR12TB58
Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 5/8in threaded rod.
Contact for Pricing

Panduit
FRQMC-X
Used wherever additional FiberRunner Slide Clamps would be helpful. For example, use on 12x4 FiberRunner QuikLock Brackets to accommodate dual runs of 6x4 or 4x4 FiberRunner Channel.
Contact for Pricing
Minimum Qty: 100
Multiplier: 10
*Contact for lower quantities*

Panduit
FR12TB2412
Used to support the 12x4 system by spanning two threaded rod drops that are 24in apart. Ideal for supporting trapeze bracket from 24in wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 1/2in threaded rod.
Contact for Pricing