All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Wire Management Devices And Accessories And Supplies

Wire Raceways Conduit and Busways

Subcategories

    Busway

    Busway Fitting And Accessories

    Cable Handler

    Cable Ladder

    Cable Tray

    Cable Tray Fitting And Accessories

    Electrical Conduit

    Electrical Conduit Coupling

    Electrical Conduit Elbow

    Electrical Conduit Fitting Body

    Electrical Conduit Nipple

    Electrical Wire Or Cable Raceway

    Wireway

    Wireway Fitting And Accessories

    Wiring Duct

    Wiring Duct Fitting And Accessories

    Wiring Trough

Showing 409-420 of 934 results

Panduit FR24TBE12M - Used to support the 24x4 system by spanning two 1/2" existing threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.
Panduit

FR24TBE12M


Used to support the 24x4 system by spanning two 1/2" existing threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Contact for Pricing

Panduit FRHC4LYL2 - FIBERRUNNER? SNAP-ON HINGED COVER FOR C
Panduit

FRHC4LYL2


FIBERRUNNER? SNAP-ON HINGED COVER FOR C

Contact for Pricing

Minimum Qty: 8

Multiplier: 8

*Contact for lower quantities*

Panduit FRHC6YL10 - The FiberRunner Snap-On Hinged 6x4 Cover is designed to be used in a cable routing system that uses the FR6x4YL10 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30 and 90 . The channel is avaialble in 10 feet lengths
Panduit

FRHC6YL10


The FiberRunner Snap-On Hinged 6x4 Cover is designed to be used in a cable routing system that uses the FR6x4YL10 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30 and 90 . The channel is avaialble in 10 feet lengths

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

Panduit FRHC4BL10 - The FiberRunner Snap-On Hinged 4x4 Cover is designed to be used in a cable routing system that uses the FR4x4BL10 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30 and 90 . The channel is avaialble in 10 feet lengths
Panduit

FRHC4BL10


The FiberRunner Snap-On Hinged 4x4 Cover is designed to be used in a cable routing system that uses the FR4x4BL10 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30 and 90 . The channel is avaialble in 10 feet lengths

Contact for Pricing

Minimum Qty: 4

Multiplier: 4

*Contact for lower quantities*

Panduit FRSHC6YL10 - FiberRunner split hinged cover for the channel FR6X4YL10. Snap-on hinge feature enables positioning of cover at angles between 30 and 90 . The covers come in 10 meter length
Panduit

FRSHC6YL10


FiberRunner split hinged cover for the channel FR6X4YL10. Snap-on hinge feature enables positioning of cover at angles between 30 and 90 . The covers come in 10 meter length

Contact for Pricing

Minimum Qty: 4

Multiplier: 4

*Contact for lower quantities*

Panduit FRHC12BL10 - The FiberRunner Snap-On Hinged Cover is designed to be used in a cable routing system that uses the 12x4 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30 and 90 . The cover comes in 10 feet lenghts
Panduit

FRHC12BL10


The FiberRunner Snap-On Hinged Cover is designed to be used in a cable routing system that uses the 12x4 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30 and 90 . The cover comes in 10 feet lenghts

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

Panduit FRHC12YL10 - The FiberRunner Snap-On Hinged 12x4 Cover is designed to be used in a cable routing system that uses the FR12x4YL10 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30 and 90 . The channel is avaialble in 10 feet lengths
Panduit

FRHC12YL10


The FiberRunner Snap-On Hinged 12x4 Cover is designed to be used in a cable routing system that uses the FR12x4YL10 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30 and 90 . The channel is avaialble in 10 feet lengths

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

Panduit FRSHC6BL10 - FiberRunner split hinged cover for the channel FR6X4BL10. Snap-on hinge feature enables positioning of cover at angles between 30 and 90 . The covers come in 10 feet lengths
Panduit

FRSHC6BL10


FiberRunner split hinged cover for the channel FR6X4BL10. Snap-on hinge feature enables positioning of cover at angles between 30 and 90 . The covers come in 10 feet lengths

Contact for Pricing

Minimum Qty: 8

Multiplier: 1

*Contact for lower quantities*

Panduit FR12TB2412N - The FiberRunner QuikLock Trapeze Bracket is used to support the 12x4 system by spanning two threaded rod drops that are 24 inches apart. Ideal for supporting trapeze bracket from 24-inch wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16-inch nut driver on slide clamps, for 1/2-inch or 12mm threaded rod.

The FiberRunner QuikLock Trapeze Bracket is used to support the 12x4 system by spanning two threaded rod drops that are 24 inches apart. Ideal for supporting trapeze bracket from 24-inch wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16-inch nut driver on slide clamps, for 1/2-inch or 12mm threaded rod.

Contact for Pricing

Panduit FRY126LYL - The FiberRunner Reducer Fitting attaches any 12x4 FiberRunner Fitting or Channel to two 6x4 FiberRunner Channels.
Panduit

FRY126LYL


The FiberRunner Reducer Fitting attaches any 12x4 FiberRunner Fitting or Channel to two 6x4 FiberRunner Channels.

Contact for Pricing

Panduit FRFWC6X4LYL - The FiberRunner 6x4 4-Way Cross Fitting attaches to 6x4 channels and/or fittings to create a horizontal 4-way cross intersection with two 6x4 exits.

The FiberRunner 6x4 4-Way Cross Fitting attaches to 6x4 channels and/or fittings to create a horizontal 4-way cross intersection with two 6x4 exits.

Contact for Pricing

Minimum Qty: 5

Multiplier: 1

*Contact for lower quantities*

Panduit FRT6X4LYL - The FiberRunner 6x4 Horizontal Tee creates a 90 horizontal branch from straight horizontal runs. The horizontal tee provides versatility due to multiple spillout options that include spill-over fittings and the vertical tee which accepts a three-sided trumpet, transition to corrugated tubing and the FiberRunner System.
Panduit

FRT6X4LYL


The FiberRunner 6x4 Horizontal Tee creates a 90 horizontal branch from straight horizontal runs. The horizontal tee provides versatility due to multiple spillout options that include spill-over fittings and the vertical tee which accepts a three-sided trumpet, transition to corrugated tubing and the FiberRunner System.

Contact for Pricing

Minimum Qty: 10

Multiplier: 1

*Contact for lower quantities*

Showing 409-420 of 934 results