Showing 265-276 of 934 results

Panduit
FRADC12X4BL
The fitting transitions from CommScope s 12x4 FiberGuide System to the Panduit 12x4 FiberRunner System. It is black and made of metal. Attachment hardware is included.
Contact for Pricing

Panduit
FR12CS12M
Used to support the 12x4 system from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the top of cabinets, For 12mm threaded rod.
Contact for Pricing

Panduit
FTR2X2OR
Used to limit the bend radius of the cable to 2 (50.8mm) when exiting from a Spill-Over Junction with a 2x2 exit or from 2x2 Fiber-Duct Channel, Orange.
Contact for Pricing

Panduit
FRRA12X4OR
Attaches to 12x4 channel and/or fitting to create a 90 horizontal turn from a straight horizontal run. Inside divider walls manage cables routed around horizontal right angles. Accepts optional split cover FRRASC12OR.
Contact for Pricing

Panduit
FR12ACB58M
Used to support the 12x4 system from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 16mm threaded rod.
Contact for Pricing

Panduit
FR6ACB58M
Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 16mmn threaded rod.
Contact for Pricing
Minimum Qty: 20
Multiplier: 1
*Contact for lower quantities*

Panduit
FRHC4YL2
Optional snap-on hinged cover for channel FR4X4YL2. Hinge feature enables positioning of cover at angles between 30 to 90 .
Contact for Pricing
Minimum Qty: 8
Multiplier: 8
*Contact for lower quantities*

Panduit
FRTR4X4OR
Used to limit the bend of the fiber cable to 2 (50.4 mm) when exiting from 4x4 FiberRunner Channel or a FiberRunner Horizontal Tee, Orange.
Contact for Pricing

Panduit
FRTSC4YL
Optional split cover for the horizontal tee fitting FRT4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.
Contact for Pricing

Panduit
FROVRA4X4YL
Attaches to 4x4 channel and/or fittings to create a 90 vertical turn down from a straight horizontal run. Accepts optional split cover FROVRASC4YL.
Contact for Pricing

Panduit
FR6CS58
Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the top of cabinets, For 5/8in threaded rod.
Contact for Pricing
Minimum Qty: 20
Multiplier: 1
*Contact for lower quantities*

Panduit
FRH454X4YL
Attaches to 4x4 channel and/or fittings to create a 45 horizontal turn from a straight horizontal run. Accepts optional split cover FRH45SC4YL.
Contact for Pricing