Pre-assembled 6in x 4in QuikLock coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Yellow, 20 pieces.

Attaches to 24x4 channel and/or fittings to create a horizontal four way cross intersection with two 24x4 exits. Accepts optional split cover FRFWCCV24BL.

The UCSQ1-V316 Uniclip Mounting Bracket is an effective option for protecting against high short circuit fault current requirements in harsh environments. This product provides labor savings and enables cable cleats to be mounted on unslotted strut-type cable tray rungs. Designed for use with Panduit s MLT and MS Strapping Cable Cleats. Made from 316 AISI SS.

The FiberRunner 4x4 Horizontal Right-Angle Cover creates openings for easy access to add or remove cables.

100x80 wire retainer

Attaches to 12x4 channel and/or fittings to create a 90 horizontal branch with a 12x4 exit from straight horizontal run. Accepts optional split cover FRTSC12OR.

Optional split hinged cover for the channel FR6X4YL6. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30 and 90 .

Used to route cable into one or two pieces of 1.5 (38mm) diameter split corrugated tubing. Requires coupler to be used with 4x4 FiberRunner Fitting. Used with any 4x4 FiberRunner Fitting, Black.

Attaches to a 24x4 channel and/or fittings to create a horizontal four way cross intersection with two 12x4 exits. Accepts optional split cover FRFWCCV24W12YL.

The FiberRunner 12x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.

The FiberRunner 4x4 4-Way Cross Cover is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.

The FiberRunner 2x2 Outside Vertical attaches to a channel to create a 45 downward angle from a straight horizontal run. It is used with inside vertical 45 angle fitting FIV452X2LYL to change the level of straight horizontal runs.