All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Hardware And Supplies

Subcategories

    Cable Clamp And Staple

    Cable Clips

    Cable Splicing Kits

    Cable Tie Kit

    Cable Tie Mounts

    Cable Ties

    Connector Mounting Hardware

    Din Rail

    Electrical Cable Grip

    Electrical Hangers

    Electrical Insulators

    Electrical Receptacle Multipliers

    Handle tie

    Harness Board Nails

    Heat Shrinkable Tube

    Strain Reliefs

    Transformer Bushings

    Wallplates

    Wire And Cable Pulling Device

Showing 205-216 of 709 results

ABB - Installation Products TC5141-NDT - Detectable Saddle Support Mounting Base, Detectable Blue Nylon, Length of 17.02mm (0.67 Inches), Width of 11.1mm (0.43 Inches), Screw Mounting Method, #6 Pan Head Screw, Mounting Hole Size of 3.8mm (0.15 Inches), 100 Pack
ABB - Installation Products · TY-RAP

TC5141-NDT


Detectable Saddle Support Mounting Base, Detectable Blue Nylon, Length of 17.02mm (0.67 Inches), Width of 11.1mm (0.43 Inches), Screw Mounting Method, #6 Pan Head Screw, Mounting Hole Size of 3.8mm (0.15 Inches), 100 Pack

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products TC5141-PDT - Detectable Saddle Support Mounting Base, Detectable Blue Polypropylene, Length of 17.02mm (0.67 Inches), Width of 11.1mm (0.43 Inches), Height of 8.38mm (0.33 Inches), Screw Mounting Method, #6 Pan Head Screw, Mounting Hole Size of 3.8mm (0.15 Inches)
ABB - Installation Products · Ty-Rap

TC5141-PDT


Detectable Saddle Support Mounting Base, Detectable Blue Polypropylene, Length of 17.02mm (0.67 Inches), Width of 11.1mm (0.43 Inches), Height of 8.38mm (0.33 Inches), Screw Mounting Method, #6 Pan Head Screw, Mounting Hole Size of 3.8mm (0.15 Inches)

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products MPNY-1000-9-C - Cable Tie Mounting Base, Natural Nylon 6.6 for Temperatures up to 70 Degrees Celsius (158 F), Length of 25.14mm (0.99 Inches), Width of 25.14mm (0.99 Inches), Height of 5.08mm (0.198 Inches), Mechanical Strength 50 Newtons (11 Pounds), Hole Size #6, Synthetic Rubber Mounting Method, 100 Pack
ABB - Installation Products · CATAMOUNT

MPNY-1000-9-C


Cable Tie Mounting Base, Natural Nylon 6.6 for Temperatures up to 70 Degrees Celsius (158 F), Length of 25.14mm (0.99 Inches), Width of 25.14mm (0.99 Inches), Height of 5.08mm (0.198 Inches), Mechanical Strength 50 Newtons (11 Pounds), Hole Size #6, Synthetic Rubber Mounting Method, 100 Pack

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products MPNY-Q-750-9-D - Four-Way Mounting Base, Natural Nylon 6.6 for Temperatures up to 70 Degrees Celsius (158 F), Length of 19.05mm (0.75 Inches), Width of 19.05mm (0.75 Inches), Height of 5.21mm (0.205 Inches), Quick Stick Adhesive-Backed Mounting Method, Pack of 500
ABB - Installation Products · Catamount

MPNY-Q-750-9-D


Four-Way Mounting Base, Natural Nylon 6.6 for Temperatures up to 70 Degrees Celsius (158 F), Length of 19.05mm (0.75 Inches), Width of 19.05mm (0.75 Inches), Height of 5.21mm (0.205 Inches), Quick Stick Adhesive-Backed Mounting Method, Pack of 500

Contact for Pricing

Minimum Qty: 500

Multiplier: 500

*Contact for lower quantities*

ABB - Installation Products MPNY-1000-9-D - Cable Tie Mounting Base, Natural Nylon 6.6 for Temperatures up to 70 Degrees Celsius (158 F), Length of 25.14mm (0.99 Inches), Width of 25.14mm (0.99 Inches), Height of 5.08mm (0.198 Inches), Mechanical Strength 50 Newtons (11 Pounds), Hole Size #6, Synthetic Rubber Mounting Method, 500 Pack
ABB - Installation Products · CATAMOUNT

MPNY-1000-9-D


Cable Tie Mounting Base, Natural Nylon 6.6 for Temperatures up to 70 Degrees Celsius (158 F), Length of 25.14mm (0.99 Inches), Width of 25.14mm (0.99 Inches), Height of 5.08mm (0.198 Inches), Mechanical Strength 50 Newtons (11 Pounds), Hole Size #6, Synthetic Rubber Mounting Method, 500 Pack

Contact for Pricing

Minimum Qty: 500

Multiplier: 500

*Contact for lower quantities*

Panduit TMSTEHS6-D350 - Twist-On Stud Mount, .25" (6mm) Stud Dia., Impact Modified, Heat Stabilized, Weather Resistant Nylon 6.6, BL

Twist-On Stud Mount, .25" (6mm) Stud Dia., Impact Modified, Heat Stabilized, Weather Resistant Nylon 6.6, BL

Contact for Pricing

Minimum Qty: 500

Multiplier: 500

*Contact for lower quantities*

Panduit TMSTEHS11-D350 - Twist-On Stud Mount, .4375" (11mm) Stud Dia., Impact Modified, Heat Stabilized, Weather Resistant Nylon, BL

Twist-On Stud Mount, .4375" (11mm) Stud Dia., Impact Modified, Heat Stabilized, Weather Resistant Nylon, BL

Contact for Pricing

Minimum Qty: 500

Multiplier: 500

*Contact for lower quantities*

Panduit TMSTHS10-C0 - The cable tie mount in black is installed onto a 0.38" (9.7mm) stud. It is made of impact-modified weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of 100.

The cable tie mount in black is installed onto a 0.38" (9.7mm) stud. It is made of impact-modified weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of 100.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

Panduit PP2S-S12-C - Panduit PP2S-S12-C Pan-Post Standoffs support cable bundles above or away from the surface. For use in indoor environments and with size #12 (M5.5) screws. They are 1.06" x .72" x 1.97" (26.9 x 18.3 x 50.0 mm) in size and can be used with miniature, intermediate, and standard cable ties. Made of Nylon 6.6, are natural in color and come in packages of 100.
Panduit

PP2S-S12-C


Panduit PP2S-S12-C Pan-Post Standoffs support cable bundles above or away from the surface. For use in indoor environments and with size #12 (M5.5) screws. They are 1.06" x .72" x 1.97" (26.9 x 18.3 x 50.0 mm) in size and can be used with miniature, intermediate, and standard cable ties. Made of Nylon 6.6, are natural in color and come in packages of 100.

Contact for Pricing

Minimum Qty: 200

Multiplier: 100

*Contact for lower quantities*

Panduit SGTA1S8-C - The Panduit SGTA1S8-C Super Grip Cable Tie Anchor Mounts have 4-way cable tie entry, are low profile and versatile screw-installed mounts that are ideal for areas where space is limited. Designed for use in indoor environments and with miniature, intermediate and standard cross-section cable ties. They are 0.8 (20.3 mm) long and require a #8 (M4) screw for application. Made of Nylon 6.6, are natural in color and come in packages of 100.
Panduit

SGTA1S8-C


The Panduit SGTA1S8-C Super Grip Cable Tie Anchor Mounts have 4-way cable tie entry, are low profile and versatile screw-installed mounts that are ideal for areas where space is limited. Designed for use in indoor environments and with miniature, intermediate and standard cross-section cable ties. They are 0.8 (20.3 mm) long and require a #8 (M4) screw for application. Made of Nylon 6.6, are natural in color and come in packages of 100.

Contact for Pricing

Minimum Qty: 500

Multiplier: 100

*Contact for lower quantities*

Panduit SGMPMS19-C0 - The masonry push barb cable tie mount in black requires a 0.19" (4.8 mm) hole. It is made of impact-modified weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for outdoor environments and comes in packages of 100.

The masonry push barb cable tie mount in black requires a 0.19" (4.8 mm) hole. It is made of impact-modified weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for outdoor environments and comes in packages of 100.

Contact for Pricing

Minimum Qty: 500

Multiplier: 100

*Contact for lower quantities*

Panduit SGMPMS25-C0 - The masonry push barb cable tie mount in black requires a 0.25" (6.4 mm) hole. It is made of impact-modified weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for outdoor environments and comes in packages of 100.

The masonry push barb cable tie mount in black requires a 0.25" (6.4 mm) hole. It is made of impact-modified weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for outdoor environments and comes in packages of 100.

Contact for Pricing

Minimum Qty: 500

Multiplier: 100

*Contact for lower quantities*

Showing 205-216 of 709 results