The TX6-28 Cat 6 UTP Patch Cord is a 1.5-Meter, 0.150-inch (3.8mm) diameter, Blue cord constructed of 28 AWG, unshielded, twisted pair, stranded, CM/LSZH cable with high-performance modular plugs. Its compact 28 AWG design simplifies installation and management. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.

The TX6-28 Cat 6 UTP Patch Cord is a 2-Meter, 0.150-inch (3.8mm) diameter, Green cord constructed of 28 AWG, unshielded, twisted pair, stranded, CM/LSZH cable with high-performance modular plugs. Its compact 28 AWG design simplifies installation and management. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.

The TX6-28 Cat 6 UTP Patch Cord is a 2-Meter, 0.150-inch (3.8mm) diameter, Red cord constructed of 28 AWG, unshielded, twisted pair, stranded, CM/LSZH cable with high-performance modular plugs. Its compact 28 AWG design simplifies installation and management. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.

The TX6-28 Cat 6 UTP Patch Cord is a 3-Meter, 0.150-inch (3.8mm) diameter, Green cord constructed of 28 AWG, unshielded, twisted pair, stranded, CM/LSZH cable with high-performance modular plugs. Its compact 28 AWG design simplifies installation and management. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.

The five-hole splice bar is available in an electro zinc finish. The splice bar reinforces the larger outside radius for horizontal basket tray sweeps (refer to instruction sheet for application guidance). This splice is sold in packs of 12 pieces. Hardware (PWBHKEZ) for securing the bar to the basket wire is sold separately.

Thin wall VW-1 heat shrink, .19" (4.8mm) diameter, black cross-linked polyolefin, 25 pc. package quantity.

Metal frame supports the PDS dispenser above the cable tie reel as ties are loaded into dispenser; can be used as a free-standing unit or permanently mounted to a bench or cart. Dispenser frame includes a scrap bin collector, not shown in this photo, that attaches to any of the PDS dispensers (part numbers PDS, PDS-EI, PDS-EI-DI, PDS-DI).

The TX6 Cat 6 UTP copper cable is constructed of 23 AWG copper conductors with FEP/polyolefin (CMP) insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant, plenum-rated, white jacket.

The TX6A Cat 6A U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors shall be twisted in pairs. All four pairs shall be surrounded by a metallic alien crosstalk barrier tape and covered by a flame retardant PVC (CMP), Orange jacket. Packaged 1000 ft./305m on a reel.

Blade Replacement Kit for PTH.

The TX5e Cat 5e U/UTP Plenum copper cable is constructed of 24 AWG copper conductors with FEP/polyolefin insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMP), Black jacket. Packaged 1000 ft./305m in an easy payout carton.

The TX6000 Enhanced Cat 6 U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a HDPE flame-retardant jacket. The blue, riser (CMR) cable is supplied 1,000 feet (305 meters) to an easy pay-out carton.