Vertical blanking panel for 600mm cabinets. Color: Black

The Net-Contain Roofing Section is used with the Universal Aisle Containment system. The 800mm roofing section is for a 4-foot (1200mm) aisle width and is white.

The NetKey 2 Fiber Patch Cord is an OM3 patch cord with LC Duplex connectors. It is Riser (OFNR) rated, with a 1.6mm jacket, and is 2 meters in length.

HD FLEX CASSETTE; 1 MPO TO 6 DUPLEX LC; OM3 FIBER AND OPTIMIZED LOSS; METHOD B POLARITY

The TX6000 Cat 6 U/UTP LSZH copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant HDPE (LSZH), Blue jacket. Packaged 1000 ft./305m on a reel in a box.

OM3 12 fiber, interconnect cable assembly, plenum (OFNP) rated, MPO male to MPO male, Method A Std IL with no pulling eye, Aqua, 62 ft

OM3 12-fiber, indoor small diameter trunk cable assembly, low smoke zero halogen rated, MPO female To LC duplex, Std. IL, with pulling on eye on end A, 95 meters.

OM3 12-fiber, indoor small diameter trunk cable assembly, low smoke zero halogen rated, MPO female To LC duplex, Std. IL, with pulling on eye on end A, 25 meters.

This Panduit G5 Monitored Switched PDU features (30) C13 and (6) C19 outlets. It is a 30 amp, 208 V, single phase PDU with a NEMA L6-30P input plug and a 10 foot (3m) power cord.

OM5, 12 Fiber Interconnect, Plenum, PanMPO Female to PanMPO Female, Method A, Ultra Insertion Loss - 36 Feet

The CD-2001-8-SET Crimp Dies provide circumferential crimp results in terminations with premium electrical and mechanical performance. Color-coded to provide easy matching on connectors while an embossed die index number on the connector barrels provide post crimp inspection. The part number is permanently marked on the crimping die for easy identification and used with the CT-3001/ST and CT-3001/CCP series tools.

The CD-2001-2-SET Crimp Dies provide circumferential crimp results in terminations with premium electrical and mechanical performance. Color-coded to provide easy matching on connectors while an embossed die index number on the connector barrels provide post crimp inspection. The part number is permanently marked on the crimping die for easy identification and used with the CT-3001/ST and CT-3001/CCP series tools.