nVent UACRG400 - The nVent CADDY Ultrx Nonmetallic Enclosure (SKU: UACRG400) is a high-performance, fiberglass-reinforced enclosure designed to provide superior protection for sensitive electrical and electronic components in demanding industrial environments. Engineered by nVent, a global leader in thermal management and electrical solutions, the Ultrx series delivers unmatched durability, corrosion resistance, and environmental protection, making it an ideal choice for applications where traditional metal enclosures fall short. Built to meet Type 4X standards, this enclosure ensures protection against dust, water ingress, and corrosion, even in harsh outdoor or corrosive indoor conditions. The lightweight yet rugged fiberglass construction offers exceptional strength-to-weight ratio, reducing installation time and labor costs while maintaining long-term reliability. The light gray finish not only enhances visibility in low-light environments but also resists fading and UV degradation, ensuring consistent performance over years of service. Designed for versatility, the Ultrx enclosure is available in multiple sizes, including the UACRG400 model with dimensions of 500x400x300mm, providing ample space for housing control panels, PLCs, power supplies, and other critical components. The solid door design ensures a tight seal, while optional window doors allow for visual inspection without compromising protection. The enclosure’s smooth, non-porous surface is easy to clean and resistant to chemicals, making it suitable for use in food processing, pharmaceutical, chemical processing, and wastewater treatment facilities. Installation is streamlined with the inclusion of mounting brackets and self-tapping screws, reducing setup time and ensuring a secure fit. nVent’s Ultrx enclosures are also compatible with a wide range of accessories, including keylock kits, padlock kits, and rack angles, allowing for customization to meet specific application requirements. Whether deployed in manufacturing plants, utility substations, or renewable energy installations, the Ultrx enclosure delivers the reliability and protection needed to safeguard valuable equipment. As part of nVent’s trusted CADDY product line, the Ultrx series reflects the company’s commitment to innovation and quality. With a reputation for engineering solutions that meet the highest industry standards, nVent provides enclosures that professionals can depend on for performance, safety, and longevity. The UACRG400 model is proudly manufactured in the USA, ensuring consistent quality and supporting local industry. For engineers, contractors, and facility managers seeking a durable, low-maintenance enclosure solution, the nVent CADDY Ultrx Nonmetallic Enclosure is the smart choice for protecting critical infrastructure.
nVent

UACRG400

UPC: 783510386535

Contact for Pricing

Overview

The nVent CADDY Ultrx Nonmetallic Enclosure, SKU UACRG400, is engineered for superior protection of electrical and electronic components in challenging industrial settings. Constructed from fiberglass-reinforced material, this enclosure meets Type 4X standards, providing robust defense against dust, water ingress, and corrosion, making it ideal for harsh outdoor or corrosive indoor applications. Its dimensions are 500x400x300mm, offering ample internal space for control panels, PLCs, and power supplies. The lightweight yet strong fiberglass construction simplifies installation and ensures long-term reliability. The light gray finish resists fading and UV degradation, enhancing visibility in low-light conditions. This solid door model ensures a tight seal, and its smooth, non-porous surface is easy to clean and chemical-resistant, suitable for food processing, pharmaceutical, chemical, and wastewater treatment facilities. Installation is facilitated by included mounting brackets and self-tapping screws. The Ultrx enclosure is compatible with various accessories for customization. Manufactured in the USA, the UACRG400 exemplifies nVent's commitment to quality and performance for critical infrastructure protection.
  • Type 4X rated fiberglass-reinforced enclosure for superior protection
  • Dimensions: 500x400x300mm, ideal for control panels and critical components
  • Corrosion-resistant and chemical-resistant construction for harsh environments
  • Lightweight and durable fiberglass material simplifies installation
  • Light gray finish resists fading and UV degradation

Specifications

Color
Light Gray
Material
Fiberglass
Mounting Type
Mounting Brackets with Self-Tapping Screws
Nema Rating
Type 4X
Series
CADDY Ultrx
Size
500x400x300mm
Package Dimensions (L x W x H)
5.7 IN x 5.7 IN x 1.9 IN
Package Dimensions (L x W x H)
14.478 cm x 14.478 cm x 4.826 cm
Package Weight (Imperial)
2.000 L
Package Weight (Metric)
0.907 kg
A50 Fiberglass Mounting Bracket Kit, Fiberglass

A50MFKR

A50 Fiberglass Mounting Bracket Kit, Fiberglass
ARCA JIC 24 x 24 x 10 hinged opaque cover, stainless steel latch, padlockable

AR242410CHSSL

ARCA JIC 24 x 24 x 10 hinged opaque cover, stainless steel latch, padlockable
Non Metallic Flange - Fits 10 x 8 - Fiberglass

PJFPUWM108

Non Metallic Flange - Fits 10 x 8 - Fiberglass
SET OF 50 INSULATED SPACER FOR SBC HEIGHT 100 MM

50204100

SET OF 50 INSULATED SPACER FOR SBC HEIGHT 100 MM
8x8x4 Polycarbonate Enclosure NEMA 4X | Hinged Cover | Gray | Stainless Steel Locking Latch | Mounting Feet

H8084HLL

8x8x4 Polycarbonate Enclosure NEMA 4X | Hinged Cover | Gray | Stainless Steel Locking Latch | Mounting Feet
Holder, Wire, Head Length 3.15 Inches, Hole Diameter 0.87 x 0.92 Inches, Screw Length 2-1/4 Inch, Porcelain

SW4BB

Holder, Wire, Head Length 3.15 Inches, Hole Diameter 0.87 x 0.92 Inches, Screw Length 2-1/4 Inch, Porcelain
A support fastener with a beam clamp assembly for securing conduit and electrical boxes to most structures. It is designed to mount 4" square boxes to 1/2" EMT conduit. The part is manufactured from steel and spring steel with a pre-galvanized steel finish and Black Claw spring steel fasteners riveted to the part.

CBS18HIC50APS

A support fastener with a beam clamp assembly for securing conduit and electrical boxes to most structures. It is designed to mount 4" square boxes to 1/2" EMT conduit. The part is manufactured from steel and spring steel with a pre-galvanized steel finish and Black Claw spring steel fasteners riveted to the part.
PowerMark Gold Bond Screw Kit for 100-200 A.

TBS

PowerMark Gold Bond Screw Kit for 100-200 A.
End Cover (DS4-TW Series)

D-DS4-TW-01P-11-00Z(H)

End Cover (DS4-TW Series)
Box Support, Steel, Electro Galvanized 2 in. size, 2-1/2 in. length 100 per pack

SBL300

Box Support, Steel, Electro Galvanized 2 in. size, 2-1/2 in. length 100 per pack

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.