nVent T703646G400 T-Series Large Capacity Outdoor without Heat T70, 36000BTU 460V, Lt Gray, Steel
UPC: 783510243074
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Compact footprint to minimize real estate and maximize capacity
- Cleanable, reusable aluminum mesh filter protects coils for maximum cooling performance
- Operating temperature range from -40 F/-40 C to 131 F/55 C
- Reliable mechanical thermostat on enclosure side of the unit
- Dual condenser-side air movers for performance redundancy
- Painted galvanized sheet-metal cover for rugged factory and outdoor environments
- Exterior and fully recessed mounting options on many models
- Easy-mount flanges for simple installation
- Options include telcordia GR-487 capable, thermostat, corrosion-resistant components, malfunction switch, compressor heater, head pressure control and enclosure heater
- Mounting hardware, gaskets and user manual furnished with the unit
Specifications
Application | Hygienic Environments; Controls and Drives; Hazardous Environments; Arc Flash Safety; Corrosive Environments; Power Distribution |
Application | Arc Flash Safety;Controls and Drives;Corrosive Environments;Hazardous Environments;Hygienic Environments;Power Distribution |
Color | Light Gray |
Color | Gray |
Color | Lt Gray |
Color Code | RAL 7035 |
Depth | 532 mm |
Depth | 20.94 in |
Finish | Powder Coated |
Height | 1,772 mm |
Height | 69.77 in |
Material | Steel |
Material | Mild Steel |
Max Current | 18 A |
NEMA Rating | 4 Watertight |
Nominal Capacity Btu/h | 43,000 Btu/h |
Nominal Capacity Watts | 12,602 W |
Nominal Voltage | 460 V |
Number Of Phases | 1 |
Operating Temperature | -40-55 |
Operating Temperature | -40-55 °C |
Operating Temperature | -40-131 °F |
Outdoor Installation | Yes |
Product Family | T-Series |
Protection Rating | NEMA Type 4 |
Refrigerant | R134a |
Remote Access Control | No |
Series | T-Series |
Series | T70 |
Size | Large Capacity Outdoor |
Size | 36000BTU |
Thickness | 1.21 mm |
Thickness | 18 ga |
Thickness | 51.40mm (2.024") |
Type | Air Conditioners |
Voltage AC | 400-460 V |
Voltage Rating | 460 V |
Weight | 118 kg |
Weight | 395 lb |
Width | 579 mm |
Width | 22.8 in |
Package Dimensions (L x W x H) | 25 IN x 24 IN x 70 IN |
Package Dimensions (L x W x H) | 63.5 cm x 60.96 cm x 177.8 cm |
Package Weight (Imperial) | 395.000 L |
Package Weight (Metric) | 179.172 kg |
N360846G151P
SPECTRACOOL NARROW AC, Bulletin MCLG (SPECTRACOOL® Air Conditioner - N280416 Narrow Spectracool -PL) ex17N360826G151P
SPECTRACOOL NARROW AC, Bulletin MCLG (SPECTRACOOL® Air Conditioner - N280416 Narrow Spectracool -PL) ex14N280425G051P
SPECTRACOOL NARROW AC, Bulletin MCLG (SPECTRACOOL® Air Conditioner - N280416 Narrow Spectracool -PL) ex3N360826G150P
SPECTRACOOL NARROW AC, Bulletin MCLG (SPECTRACOOL® Air Conditioner - N280416 Narrow Spectracool -PL) ex13How to Install the T703646G400 Air Conditioner
Installation guide for mounting and wiring the T703646G400 air conditioner.
Estimated time: 45m
Tools needed:
Wrench, Ratchet driver, Screwdriver
Supplies needed:
Mounting gasket kit
- Inspect and test the air conditioner
Inspect the air conditioner for any shipping damage. If the unit has been in a horizontal position, ensure it is placed upright for at least 5 minutes before operating. Test the unit by connecting it to a properly grounded power supply and verifying that the evaporator blower starts. Allow the unit to run for 5-10 minutes with the compressor operating. Check that condenser air temperatures are warmer than normal room temperatures within a few minutes after the condenser air blower starts. Refer to the nameplate for specific electrical requirements and ensure the circuit ampacity is at least 125% of the amperage shown in the design data section. Do not connect other equipment to this circuit to prevent overloading.
- Prepare for mounting
Install the mounting gasket to the back of the air conditioner using the provided mounting gasket kit. Refer to the 'Mounting Cutout Dimensions' section for the correct gasket placement based on your unit's tonnage (3 Ton or 5 Ton).
- Mount the air conditioner
Mount the air conditioner onto the enclosure, taking care not to damage the mounting gasket, as it forms the seal between the unit and the enclosure. Avoid dragging the air conditioner on the enclosure with the gasket attached to prevent rips or tears.
- Secure the mounting bolts
Start the mounting bolts by hand to avoid cross-threading, then tighten them with a wrench or ratchet driver.
- Wire the unit
Refer to the nameplate for electrical requirements and wire the unit to a properly grounded power supply. The electrical circuit should be fused with a slow-blow fuse or a HACR circuit breaker. If a remote-mounted thermostat is required, wire its outputs to the appropriate terminals on the 24VAC terminal strip, referencing the wiring diagram for correct locations.
- Set the thermostat
Set the thermostat for the required cabinet temperature. Refer to the 'Sequence of Operation' section for thermostat adjustment and operation details. For cooling, the typical range is 75-100°F, and for heating, it's 55-65°F. Note that extended operation below 70°F can cause coil freeze-ups.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.