nVent T430626G153 - T-Series Mid-Size Outdoor with Heat T43, 6000BTU 460V, Lt Gray, Steel
nVent

T430626G153

UPC: 783510233228

Documents & Media
Installation Instructions

Contact for Pricing

Overview

The nVent T-Series Mid-Size Outdoor Air Conditioner, SKU T430626G153, is engineered to provide robust thermal management solutions for critical industrial equipment operating in demanding outdoor and factory environments. Designed for reliability and longevity, this unit delivers 6000 BTU of cooling capacity, ensuring optimal operating temperatures even under significant heat loads. Its discreet, light gray steel enclosure is built to withstand harsh conditions, blending seamlessly into rugged industrial landscapes while offering superior protection. Engineered for exceptional outdoor performance, the T43 model incorporates advanced features that set it apart. Each unit is equipped with corrosion-resistant components, a crucial element for extended service life in exposed locations. Furthermore, integrated compressor heaters and head pressure controls are standard, guaranteeing efficient and stable operation across a wide range of ambient temperatures and varying load conditions. This proactive design minimizes the risk of equipment failure due to thermal stress or environmental extremes, providing peace of mind for plant managers and maintenance engineers. Applications for the nVent T-Series Mid-Size Outdoor Air Conditioner are diverse, spanning critical infrastructure and manufacturing sectors. It is ideally suited for cooling control cabinets, electrical enclosures, and sensitive electronic equipment located outdoors, such as at substations, telecommunication sites, or remote industrial facilities. Within manufacturing plants, it can effectively manage heat generated by machinery and control systems in areas where standard HVAC is insufficient or impractical. The 460V power requirement makes it compatible with standard industrial power grids in many regions. Key benefits of selecting the nVent T43 include enhanced equipment reliability, reduced downtime, and extended operational lifespan for your valuable assets. The robust construction and specialized outdoor features minimize the need for frequent maintenance and costly repairs. nVent's reputation as a trusted leader in enclosure thermal management ensures that this air conditioner is built to exacting standards, offering a dependable solution for your most critical cooling needs. Installation is designed to be straightforward, integrating with standard enclosure mounting practices. When selecting an air conditioner for challenging environments, the nVent T-Series offers a proven and effective choice.
  • Robust 6000 BTU cooling capacity for effective thermal management.
  • Designed for demanding outdoor and factory environments with a discreet light gray steel enclosure.
  • Corrosion-resistant components ensure longevity in exposed conditions.
  • Integrated compressor heaters and head pressure controls for optimal outdoor performance.
  • Reliable solution for cooling control cabinets, electrical enclosures, and sensitive equipment.
  • Reliable mechanical thermostat on enclosure side of the unit
  • Dual condenser-side air movers for performance redundancy
  • Painted galvanized sheet-metal or stainless steel cover for rugged factory and outdoor environments
  • Easy-mount flanges for simple installation
  • Every unit functionally tested before shipping

Specifications

Amperage Rating
2.3 A
Application
Power Distribution; Controls and Drives
Btu Rating
6,600
Color
Light Gray
Color Code
RAL 7035
Depth
10.9 in
Depth
277 mm
Finish
Powder Coated
Frequency Rating
50/60 Hz
Height
43 in
Height
1,092 mm
Material
Mild Steel
Max Current
2.3 A
Model
T43
Nominal Capacity Btu/h
6,600 Btu/h
Nominal Capacity Watts
1,934 W
Nominal Voltage
230 V
Number Of Phases
1
Operating Temperature
-40-131
Operating Temperature
-40-55
Phase
1
Power
1934 W
Product Family
T-Series
Remote Access Control
No
Thickness
1.21 mm
Thickness
18 ga
Type
Air Conditioners
Voltage AC
200-250 V
Voltage Rating
230
Weight
57 kg
Weight
121 lb
Width
400 mm
Width
15.75 in
Package Dimensions (L x W x H)
21 IN x 14 IN x 44 IN
Package Dimensions (L x W x H)
53.34 cm x 35.56 cm x 111.76 cm
Package Weight (Imperial)
121.000 L
Package Weight (Metric)
54.886 kg
T-Series Mid-Size Outdoor with Heat T43, 6000BTU 230V, Lt Gray, Steel

T430626G150

T-Series Mid-Size Outdoor with Heat T43, 6000BTU 230V, Lt Gray, Steel
DTT 6201 230V SC 7035

13256241055

DTT 6201 230V SC 7035
AC Unit 9-12,000 BTU/H 230V

DTS3245A230LG

AC Unit 9-12,000 BTU/H 230V

How to Install the T430846G403 Air Conditioner

This guide provides step-by-step instructions for installing the T430846G403 air conditioner, ensuring proper mounting, wiring, and initial setup.

Estimated time: 45m

Tools needed:

Screwdriver, Wrench, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Gasket kit, Drain tube

  1. Inspect the air conditioner

    Check for any visible damage and ensure the unit is functioning properly before installation. Connect the power cord to a grounded supply and run the unit for 5-10 minutes to verify operation.

  2. Prepare the mounting area

    Using the provided cutout dimensions, prepare the air 'IN' and air 'OUT' openings and the mounting bolt hole pattern on the enclosure.

  3. Install gaskets

    Apply the gaskets from the gasket kit to the air conditioner in the specified locations to ensure a proper seal.

  4. Mount the air conditioner

    Secure the air conditioner to the enclosure using the provided mounting screws. Use the 'EZ' mount tabs to hold the unit in place while securing it.

  5. Connect the drain tube

    Route the drain tube ensuring it has a continuous downward slope and is not kinked. This prevents overflow from the condensate drain pan.

  6. Connect the power supply

    Refer to the nameplate for the correct electrical requirements and connect the power cord to a properly grounded power supply. Avoid using an extension cord.

  7. Adjust the thermostat

    Remove the nylon plug from the thermostat if applicable, and use a screwdriver to set the desired temperature. Turn clockwise for cooler temperatures.

  8. Verify installation

    After installation, power on the unit and check for proper operation. Ensure that the compressor and blowers are running without excessive noise or vibration.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.