Contact for Pricing
Overview
- Adjustable mounting allows various wall-mount enclosures to fit inside the solar shield
- Refer to the table to determine which solar shield fits your enclosure size
- Shields are finished with paint over plated surfaces
- Hardware is included for mounting the solar shield to an enclosure
- Accommodates enclosures up to 20" x 20" x 12"
Specifications
Application | Controls and Drives |
Color | White |
Finish | Galvanized |
IP Rating | IP66 |
Material | Galvanized Steel |
Material | Mild Steel |
Mounting Type | Wall-mount |
Nema Rating | Type 4 and 12 |
Size | 24.00x24.00x12.75 inches |
Thickness | 51.40mm (2.024") |
Thickness | 14 ga |
Thickness | 1.99 mm |
Type | External Mounting for Industrial Enclosures |
Type Number | Type 4 |
Weight | 41.1 lb |
Works With | NEMA |
Package Dimensions (L x W x H) | 25.1 IN x 24.8 IN x 14 IN |
Package Dimensions (L x W x H) | 63.754 cm x 62.992 cm x 35.56 cm |
Package Weight (Imperial) | 41.100 L |
Package Weight (Metric) | 18.643 kg |
6011DW-25
Adjustable bar hanger. Depth 1-3/16 inch. For 3/8 inch, 1/2 inch and 5/8 inch wall board and plaster. Score marks for drywall and plaster depths. Maximum load capacity: 50 pounds (22.7 kilograms). Length: 10-1/2 inches to 18-1/2 inches. Packaged complete with fastener.
BST
This is a screwless electrical box mount for supporting an electrical box with drywall. It is made of pre-galvanized steel and has a stamped construction. The design is one-piece break-away and is intended to prevent box pullout. Listed dimensions include a trade size of 5.25 x 3.50 x 0.023 and leg length of 2.50 in with a leg width of 0.50 in.
P6063C
6x6x3 Polycarbonate Enclosure NEMA 6P | Standard Hinge | Clear Lid | Integrated Locking Latch | Intergrated Mounting FlangeHow to Install the SW2LGLWH Controller
This guide provides step-by-step instructions for installing and configuring the SW2LGLWH Controller on a DIN rail.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors
- Mount the controller
Secure the SW2LGLWH controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.
- Connect the wiring
Use terminal connectors to connect the power supply and input/output wires to the designated terminals on the controller. Ensure all connections are secure and properly insulated.
- Configure the controller
Power on the controller and use the programming interface to configure the settings according to your application requirements. Refer to the user manual for specific configuration options.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.