nVent PTHS482430G4A ProTek Double-Hinge Solid AC Type 4 12, 48.54x23.62x31.06, Lt Gray, Steel
UPC: 783510381141
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Front and rear access to 19-inch rack equipment provided by three-part design: door, center section and wall section
- Solid door provides complete physical and visual protection
- Window door, made of scratch-resistant safety glass, provides visual monitoring of internal equipment while maintaining equipment protection
- All seams are fully welded and ground smooth
- Doors, center section and wall section are provided with ground studs to facilitate proper bonding and grounding of the cabinet
- Premium seamless, foam-in-place gasket prevents contaminants from entering the cabinet
- Key-locking wing knob is included on painted steel cabinet, providing access control to the cabinet; two keys are included with each cabinet
- Stainless steel cabinet is provided with a quarter-turn slotted latch
- One set of plated, self-grounding, tapped 10-32 rack angles per EIA universal spacing standards, which can be adjusted front-to-back, is provided with each center section of the cabinet; additional tapped- or square-hole rack angles can be added to the ca
- On 28-inch (700 mm) wide enclosures, a 4-inch vertical cable manager with composite fingers is provided on hinge side of cabinet
Specifications
Additional Rack Angles | PTRA48T or PTRA48S |
Application | Controls and Drives;Datacom and Telecom Equipment;Networking, Storage and Data Center |
Application | Networking, Storage and Data Center; Datacom and Telecom Equipment; Controls and Drives |
Body Thickness | 1.9 mm |
Body Thickness | 14 ga |
Body Thickness | 16 ga |
Color | Gray |
Color | Grey |
Color | Lt Gray |
Color Code | RAL 7035 |
Depth | 789 mm |
Depth | 31.06 in |
Door Thickness | 16 ga |
Door Thickness | 14 ga |
Door Thickness | 1.52 mm |
Finish | Lt Gray;Powder Coating |
Finish | Lt Gray |
Height | 48.54 in |
Height | 1,233 mm |
IP Rating | IP66 |
Ip Rating | Type 4 |
Material | Steel |
Material | Mild Steel;Steel |
Modification Services | Yes |
Mounting Type | Wall Mount |
Nema Rating | Type 4 |
NEMA Rating | 12 Indoor, dust-resistant |
NEMA Rating | 12 |
Optional Steel Panel | CP4420 |
Optional Wood Panel | CP4420W |
Package Includes | N280416G108 Air Conditioner |
Product Family | ProTek |
Protection Rating | NEMA Type 12 |
Rack Units | 26 U |
Series | ProTek |
Series | ProTek Double-Hinge Solid AC |
Size | 48.54x23.62x31.06 |
Type | Data Networking Wall Mounted Cabinets |
Type Number | Type 4 |
Weight | 348 lb |
Width | 526 |
Width | 600 mm |
Width | 23.62 in |
Package Dimensions (L x W x H) | 72 IN x 42 IN x 34 IN |
Package Dimensions (L x W x H) | 182.88 cm x 106.68 cm x 86.36 cm |
Package Weight (Imperial) | 348.000 L |
Package Weight (Metric) | 157.853 kg |
UTP6AL1MBU
The TX6A™ 10Gig Cat 6A UTP Patch Cord is a 1-Meter, Blue cord constructed of 24 AWG, unshielded, twisted pair stranded, LSZH (60332-1) cable with high-performance modular plugs. Its MaTriX Tape Technology limits alien crosstalk, ensuring 10 Gb/s transmission. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.
CPP24FMWBLY
The Mini-Com Flush Mount Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack and can be identified with adhesive labels and is black.
3085
Super-Safeway® Multiple Outlet Box, Extended Depth, 2-Sided, F2 (1/2") Cord Grip Body, with Flip Lids for (2) Duplex Not Included
ST4803PDGM
Surge-Trap® Surge Protective Device is a no-fuse surge suppressor. The Surge-Trap is a UL 1449 Third Edition compliant modular style surge protective device that is DIN-rail mountable featuring a fail-safe self-protected design, visual indicator and a small foot print. A remote indicator option provides status to critical control circuit. The Surge-Trap provides advanced overvoltage protection utilizing Mersen's patented TPMOV® technology without additional protection devices. 480 Volts 3P Delta system type without N-G mode, with microswitch .
CUSTOMDIN
DIN rail is a universal mounting option for electrical and industrial control products such as circuit breakers electrical supplies terminal blocks and more. The rail system is used to stabilize a wide variety of devices and products. Ordering pre-cut DIN rail helps increase productivity and decrease jobsite clutter. On-site Flexibility Streamline custom cuts DIN rail to any length so it is ready to use when it arrives on the jobsite. Additionally DIN rail can be easily removed if relocation is necessary. Features of Custom DIN Rail from Streamline - All cut DIN rail from Streamline is galvanized steel made to eliminate rusting. Streamline ensures that all custom DIN rail orders are: De-burred Custom Length Any quantity 1-1000+ Quick turnaround (typically 2 weeks or less from receipt of order) This mechanical support structure is a must for all electrical parts solutions big or small. DIN rail allows for mounting hardware easily and quickly. These durable and versatile rails make the perfect solution for all mounting applications. Save space time and money with these cost-effective mounting solutions. Order your custom cut DIN rail today!
F62ERLNSNSNM002
OM1 2 fiber, 16mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std IL
CESUM3-C15
Membrane plate cable entry system offers a good strain relief while maintaining IP/NEMA ingress sealing rating. The CESUM3-C15 is a Rectangular Un-Terminated Cable Entry System, 4.1" (103 mm) Long, with 8 Openings 0.12" (3.0 mm) to 0.31" (8 mm), 3 Openings 0.20" (5.1 mm) to 0.35" (9.0 mm), 4 Openings 0.3" (7.5 mm) to 0.47" (12.0 mm). Color is Black. Standard Package Quantity is 1 PC.
How to Install the PTHS482430G4A Enclosure
Installation guide for mounting and wiring the PTHS482430G4A enclosure. Refer to the nameplate or datasheet for specific model ratings and dimensions.
Estimated time: 1h
Tools needed:
Screwdriver, Drill, Level, Measuring tape, Wire strippers, Pliers, Multimeter
Supplies needed:
Mounting hardware (screws, anchors), Wire connectors, Gasket sealant (if applicable)
- Select Mounting Location
Choose a suitable location for the PTHS482430G4A enclosure. Ensure the area is accessible and provides adequate space for installation and maintenance. Check the nameplate or datasheet for environmental limitations.
- Prepare Mounting Surface
Using a level and measuring tape, mark the desired mounting points on the surface. Drill pilot holes if necessary, and install appropriate mounting hardware (screws, anchors) suitable for the surface type and enclosure weight. Refer to the nameplate or datasheet for specific weight information.
- Mount the Enclosure
Position the PTHS482430G4A enclosure against the prepared mounting surface, aligning it with the installed hardware. Securely fasten the enclosure using the appropriate screws. Ensure the enclosure is level and firmly attached.
- Install Gasket (if applicable)
If your PTHS482430G4A model includes a gasket, ensure it is properly seated in the enclosure door or frame to maintain environmental protection. Apply gasket sealant if recommended by the datasheet.
- Wire the Enclosure Components
Open the enclosure door and route internal wiring according to the wiring diagram provided on the enclosure or in the datasheet. Use wire strippers to prepare wire ends and connect them to the appropriate terminals using wire connectors. Ensure all connections are secure. Refer to the nameplate or datasheet for specific wiring requirements and terminal types.
- Verify Wiring and Connections
Before closing the enclosure, double-check all wiring connections for correctness and security. Use a multimeter to verify continuity and ensure there are no short circuits. Refer to the nameplate or datasheet for voltage and current ratings.
- Close and Secure the Enclosure
Close the enclosure door and securely fasten all latches or screws. Ensure the door is properly sealed to maintain the enclosure's integrity.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.