Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- All doors have toolless hinges that allow the doors to easily be removed or reversed in the field
- All doors have ergonomic opening, keylocking handles
- Easy-to-remove side panels with keylocking latch
- Front and rear doors are fully perforated to allow for maximum air flow
- Top accepts additional cooling fans (2 x 6-in. fans) with integral finger guard prefabricated in place
- Top has sliding gland plate to accommodate large cable egress capacity
- Combination foot and adjustable leveler in each cabinet corner
- Open base for easy cable entrance
- Rack angles are fully adjustable front to rear, easily converting between tapped or square configurations
- Rack angles able to mount off-centered on 700 and 800mm wide models
Specifications
Application | Datacom and Telecom Equipment;Networking, Storage and Data Center |
Cabinet Type | Server |
Cable Entry | Yes |
Color | Black |
Color | Jet Black |
Color Code | RAL 9005 |
Depth | 43.22 in |
Depth | 1,098 mm |
Depth | 1,098 |
Finish | Powder Coated |
Finish | Powder Coating |
Frame | Yes |
Height | 2,163 |
Height | 2,163 mm |
Height | 85.14 in |
Material | Mild Steel |
Material | Steel |
Mounting | Floor Stand |
Mounting Type | Rack-Mount |
Nema Rating | Type 12 |
NEMA Rating | 1 |
NEMA Rating | NEMA Type 1 |
Product Family | ProLine S1 |
Protection Rating | NEMA Type 1 |
Rack Angle | PS1RA216 |
Rack Spacing | 19-in. |
Rack Units | 45 U |
Rack Width | 19 in |
Series | ProLine S1 |
Size | 2150x600x1100mm |
Size | 2150x600x1100 mm |
Thickness | 1.52 mm |
Thickness | 16 ga |
Thickness | 1.52 |
Type | Data Networking Freestanding Cabinets |
Weight | 331.1 lb |
Width | 23.87 in |
Width | 606 mm |
Width | 606 |
Package Dimensions (L x W x H) | 54 IN x 30.5 IN x 96 IN |
Package Dimensions (L x W x H) | 137.16 cm x 77.47 cm x 243.84 cm |
Package Weight (Imperial) | 396.000 L |
Package Weight (Metric) | 179.626 kg |
ST4803PDGM
Surge-Trap® Surge Protective Device is a no-fuse surge suppressor. The Surge-Trap is a UL 1449 Third Edition compliant modular style surge protective device that is DIN-rail mountable featuring a fail-safe self-protected design, visual indicator and a small foot print. A remote indicator option provides status to critical control circuit. The Surge-Trap provides advanced overvoltage protection utilizing Mersen's patented TPMOV® technology without additional protection devices. 480 Volts 3P Delta system type without N-G mode, with microswitch .
3085
Super-Safeway® Multiple Outlet Box, Extended Depth, 2-Sided, F2 (1/2") Cord Grip Body, with Flip Lids for (2) Duplex Not Included
F62ERLNSNSNM002
OM1 2 fiber, 16mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std IL
CPP24FMWBLY
The Mini-Com Flush Mount Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack and can be identified with adhesive labels and is black.
CESUM3-C15
Membrane plate cable entry system offers a good strain relief while maintaining IP/NEMA ingress sealing rating. The CESUM3-C15 is a Rectangular Un-Terminated Cable Entry System, 4.1" (103 mm) Long, with 8 Openings 0.12" (3.0 mm) to 0.31" (8 mm), 3 Openings 0.20" (5.1 mm) to 0.35" (9.0 mm), 4 Openings 0.3" (7.5 mm) to 0.47" (12.0 mm). Color is Black. Standard Package Quantity is 1 PC.
UTP6AL1MBU
The TX6A™ 10Gig Cat 6A UTP Patch Cord is a 1-Meter, Blue cord constructed of 24 AWG, unshielded, twisted pair stranded, LSZH (60332-1) cable with high-performance modular plugs. Its MaTriX Tape Technology limits alien crosstalk, ensuring 10 Gb/s transmission. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.
Frequently Asked Questions
What are the overall dimensions of the PS1SW21611B cabinet?
The cabinet has a height of 85.14 inches, a width of 23.87 inches, and a depth of 43.22 inches.
What material is the ProLine S1 cabinet made from?
The cabinet is constructed from mild steel with a powder-coated finish.
What is the rack unit (RU) capacity of this cabinet?
The cabinet has a capacity of 45U (Rack Units).
What is the standard rack width for this cabinet?
The cabinet is designed for a 19-inch rack width.
Can cooling fans be added to this cabinet?
Yes, the top of the cabinet accepts two 6-inch cooling fans with an integral finger guard.
What type of door handles does the cabinet feature?
All doors are equipped with ergonomic opening, keylocking handles.
How are the side panels removed?
The side panels are easy to remove and feature a keylocking latch.
What is the color and color code of the cabinet?
The cabinet is Jet Black with a color code of RAL 9005.
What is the weight of the ProLine S1 cabinet?
The cabinet weighs 331.1lb.
What industry standards does the ProLine S1 cabinet meet?
It meets UL 2416, cUL per CSA 22.2 60950-1-07, UL 2416 Bonding and Grounding (with PGK kit), EIA 310-D, and IEC 60529, IP20.
How to Install the PS1SW21611B Server Cabinet
This guide provides step-by-step instructions for installing the PS1SW21611B server cabinet, including mounting, wiring, and initial setup.
Estimated time: 1h
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Cable ties, Grounding wires
- Mount the cabinet
Secure the PS1SW21611B cabinet to the designated location using the provided mounting screws. Ensure the cabinet is level and stable.
- Connect the grounding wires
Attach the grounding wires to the bonding and grounding studs located on the cabinet. Ensure a secure connection to prevent electrical hazards.
- Install the rack angles
Insert the rack angles into the cabinet at the desired height. Use the appropriate screws to secure them in place, ensuring they are aligned with the rack unit markings.
- Wire the cabinet
Route the power and data cables through the cable management openings. Use cable ties to secure the cables and maintain a tidy installation.
- Verify connections
Use a multimeter to check all electrical connections for continuity and proper voltage. Ensure that all devices are correctly powered.
- Calibrate the cabinet
Adjust any internal components as necessary to ensure optimal airflow and equipment placement. Follow manufacturer specifications for calibration.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.