nVent P2K20108 ProLine G2 Industrial Packages Type 12, 2000x1000x800, Lt Gray, Steel
UPC: 783510320324
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 12-gauge (2.5 mm) roll-formed steel with welded corners, and hybrid frame profile for superior performance under load
- Frame features a 25-mm DIN standard, alternating rectangular and round hole pattern
- Enclosures with a width of 1200mm or less have a single-piece rear cover, and can accommodate a fully-recessed mounting subpanel; enclosures with a width of greater than 1200mm have two rear covers that affix to a removable center upright/vertical combina
- Gasket is seamless polyurethane providing a water-tight, dust-tight seal against moisture and contaminants; UL component recognized, CSA compliant
- Door bar system present on all doors (including window doors)
- Single/primary door includes Smooth Glide Latching System, 3-point roller latch system with timed latch engagement, for enclosures greater than or equal to 1000 mm in height; system ensures a solid and repeatable seal with a low closure force
- 2-door enclosures include overlapping double doors to provide full-width open front, with a secondary door that latches with two levers
- Reversible hinging on single doors (default left hinge), and on overlapping double doors (default right door primary door)
- Two grounding studs present on each door
- Low-Profile Flush Swing Handle with key lock on standard versions; double bit lock on 'E' versions; other handle options available (sold separately)
Specifications
Application | Power Distribution; Controls and Drives |
Color | Light Gray |
Color | Lt Gray |
Color Code | RAL 7035 |
Depth | 31.69 |
Depth | 805 |
Door Quantity | 1 |
Finish | Powder Coated |
Height | 78.82 |
Height | 2,002 |
Material | Mild Steel |
Material | Steel |
Max Rack Mount Unit | 42 |
Max Subpanel Size | 75.0 x 36.5 in |
Max Subpanel Size | 1906 x 928 mm |
Nema Rating | Type 12 |
Product Family | ProLine |
Series | ProLine G2 |
Size | 2000x1000x800 mm |
Type | Mild Steel Modular Industrial Enclosures |
Weight | 350 lb |
Width | 39.67 |
Width | 1,008 |
Package Dimensions (L x W x H) | 47 IN x 44 IN x 89 IN |
Package Dimensions (L x W x H) | 119.38 cm x 111.76 cm x 226.06 cm |
Package Weight (Imperial) | 350.000 L |
Package Weight (Metric) | 158.760 kg |
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What are the available frame heights?
Available frame heights include 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, and 2200 mm.
What is the load rating of the ProLine G2 frame?
The ProLine G2 frame has a 15% higher load rating than the competition.
What types of applications does ProLine G2 support?
ProLine G2 is designed for industrial environments and supports Type 3R and Seismic applications.
What safety features are included with the ProLine G2?
Safety features include mechanical and electrical interlocks, disconnect doors, and barrier panels.
What is the maximum weight the subpanel can hold?
The subpanel can hold greater than 45% more weight than previous models.
What materials are used for the ProLine G2 frame?
The frame is made of 12 gauge (2.5 mm) roll-formed steel with fully welded solid steel corner blocks.
What is the maximum load capacity for mobile bases?
The mobile base can support a load-bearing capacity of 1000 lb (453.6 kg).
What options are available for cable management?
Options include cable entry cabinets, vertical tie-down cable managers, and wire management rails.
Are there any EMC options available?
Yes, EMC options are available for various components including frames, covers, and tops.
How can I configure my ProLine G2 enclosure?
You can select components and send your configuration to an nVent HOFFMAN representative for assistance.
How to Install the P2K20108 PROLINE G2 Enclosure
Installation guide for mounting and securing the P2K20108 PROLINE G2 enclosure.
Estimated time: 1h
Tools needed:
Measuring tape, Level, Drill, Screwdriver, Pliers, Wire cutters, Wire strippers
Supplies needed:
Mounting hardware (screws, anchors), Wire connectors, Gasket sealant (if applicable)
- Select Mounting Location
Choose a suitable location for the enclosure. Ensure the mounting surface is flat, stable, and can support the weight of the enclosure and its contents. Consider environmental factors and accessibility for maintenance. Refer to the datasheet for specific environmental ratings and weight information.
- Prepare Mounting Surface
Using a measuring tape and level, mark the desired mounting points on the surface. Drill pilot holes if necessary, and install appropriate anchors if mounting to a masonry or drywall surface. Ensure the mounting points are aligned and level.
- Mount the Enclosure
Position the P2K20108 enclosure against the prepared mounting surface, aligning the mounting holes on the enclosure with the marked points or anchors. Secure the enclosure using appropriate mounting hardware (screws, bolts). Ensure the enclosure is firmly attached and level. For wall-mount enclosures, ensure the door opens in the correct direction and can be secured.
- Install Gasket and Sealant (If Applicable)
If your enclosure came with a gasket, ensure it is properly seated in the groove around the door or frame to maintain environmental protection. If required by the environment, apply gasket sealant according to its manufacturer's instructions.
- Prepare for Wiring
Identify the planned locations for cable entry. If knockouts are present, remove them using appropriate tools (e.g., knockout punch). Install cable glands or conduit fittings as needed to ensure a secure and environmentally sealed connection point for your wiring. Refer to the enclosure's specifications for maximum wire fill and conduit size limitations.
- Wire the Enclosure Components
Route your electrical wiring into the enclosure through the prepared entry points. Connect the wires to the appropriate terminals, devices, or components within the enclosure according to your system's design and electrical codes. Use wire cutters and strippers as needed. Ensure all connections are secure and properly insulated. Refer to the component datasheets for specific wiring instructions and terminal layouts. Verify voltage and current ratings are within the specified limits for all components.
- Final Inspection and Closure
Visually inspect all wiring and connections to ensure they are correct, secure, and properly insulated. Check that no tools or debris are left inside the enclosure. Close and secure the enclosure door, ensuring the latch or locking mechanism engages properly. If applicable, test the door seal.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.