Contact for Pricing
Overview
- Fully assembled, ready-to-use industrial enclosure package for immediate deployment.
- Robust steel construction with light gray powder-coat finish for durability and corrosion resistance.
- Type 12 protection rating suitable for indoor use against dust, falling dirt, and dripping/light spraying of water.
- Generous dimensions (2000x1000x800mm) with a two-door configuration for ample equipment space and accessibility.
- Includes frame, solid doors with lock, solid top/rear, full subpanel, gland plate, and lifting eyes for complete functionality.
- Single/primary door includes Smooth Glide Latching System, 3-point roller latch system with timed latch engagement, for enclosures greater than or equal to 1000 mm in height; system ensures a solid and repeatable seal with a low closure force
- 2-door enclosures include overlapping double doors to provide full-width open front, with a secondary door that latches with two levers
- Reversible hinging on single doors (default left hinge), and on overlapping double doors (default right door primary door)
- Two grounding studs present on each door
- Low-Profile Flush Swing Handle with key lock on standard versions; double bit lock on 'E' versions; other handle options available (sold separately)
Specifications
Application | Power Distribution; Controls and Drives |
Color | Light Gray |
Color Code | RAL 7035 |
Depth | 31.69 |
Depth | 805 |
Door Quantity | 2 |
Finish | Powder Coated |
Height | 78.82 |
Height | 2,002 |
Material | Mild Steel |
Max Rack Mount Unit | 42 |
Max Subpanel Size | 75.0 x 36.5 in |
Product Family | ProLine |
Type | Mild Steel Modular Industrial Enclosures |
Weight | 402 lb |
Width | 39.67 |
Width | 1,008 |
Package Dimensions (L x W x H) | 84 IN x 46.25 IN x 36 IN |
Package Dimensions (L x W x H) | 213.36 cm x 117.475 cm x 91.44 cm |
Package Weight (Imperial) | 402.000 L |
Package Weight (Metric) | 182.347 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What is the load rating of the ProLine G2 frame?
The ProLine G2 frame has a 15% higher load rating than the competition.
What are the available frame dimensions?
Frame heights range from 600 mm to 2200 mm, with various widths and depths available.
What materials are used in the ProLine G2 frame?
The frame is made of 12 gauge (2.5 mm) roll-formed steel with fully welded solid steel corner blocks.
What types of applications does ProLine G2 support?
ProLine G2 is designed for industrial environments and can accommodate Type 3R and Seismic applications.
What accessories are available for cable management?
Cable management accessories include cable entry cabinets, tie-down brackets, and wire management rails.
What types of doors are available for the enclosure?
Available door types include solid doors, window doors, perforated doors, and overlapping double doors.
What is the maximum weight capacity for the subpanel?
The subpanel can hold greater than 45% more weight than previous models.
What safety features are included with ProLine G2?
Safety features include mechanical and electrical interlocks, disconnect doors, and barrier panels.
What is the purpose of the EMC options?
EMC options are designed to maintain electromagnetic compatibility for sensitive electronic equipment.
What is the maximum load capacity for casters?
Casters can support a maximum load of 1000 lb (453.6 kg) when installed properly.
How to Install the P2KOD20108E Controller
This guide provides step-by-step instructions for installing and configuring the P2KOD20108E Controller for optimal performance.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors
- Mount the controller
Secure the P2KOD20108E controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the power supply
Using wire strippers, prepare the power supply wires and connect them to the designated terminals on the controller. Ensure that the connections are tight and secure.
- Verify connections
Use a multimeter to check the voltage at the power terminals to ensure proper power supply. Confirm that the voltage matches the specifications outlined in the controller documentation.
- Configure initial settings
Power on the controller and access the configuration menu. Set the initial parameters as required for your application, following the user manual for specific settings.
- Calibrate the controller
Follow the calibration procedure outlined in the user manual to ensure accurate readings and performance. This may involve adjusting settings based on feedback from connected sensors.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.