nVent N210246G800 SpectraCool Compact Advanced Corrosion Protection Lvl 2, 2000BTU 460V, Lt Gray, Steel
UPC: 783510357283
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Narrow design accommodates 12-inch (300-mm) deep cabinets
- Advanced Corrosion Protection Level 1 (ACP L1) Protection Includes: Protective coatings only applied to copper tubing and coils on the condenser (exterior facing) side as well as thermostat coatings
- Attractive industrial design with minimal use of visible fasteners
- Advanced Corrosion Protection Level 2 (ACP L2) Protection Includes: Everything that was coated in ACP L1, plus protective coatings applied to the evaporator (interior facing) side and an additional wrap around the thermostat
- Cleanable, reusable aluminum mesh filter protects coils for maximum cooling performance
- Outdoor model operating temperature range from -40 F/-40 C to 131 F/55 C (125 F/52 C on N28 Series)
- Reliable mechanical thermostat on enclosure side of the unit; indoor air conditioner models include digital display on ambient side
- Energy efficient rotary compressor on N36 and N43 models
- Dust-resistant condenser coil allows the unit to be run filterless in most applications
- Galvanized sheet-metal cover for rugged factory and outdoor environments
Specifications
Ambient Temperature | -40-131 °F |
Ambient Temperature | 40 Deg C |
Application | Controls and Drives;Corrosive Environments;Power Distribution |
Color | Light Gray |
Color | Gray |
Color Code | RAL 7035 |
Corrosion Resistant | Yes |
Depth | 251 mm |
Depth | 9.9 in |
Finish | Powder Coated |
Height | 639 mm |
Height | 25.17 in |
Material | Mild Steel |
Max Current | 1.9 A |
Mechanical Advantage | Stainless steel optional |
Mounting | Side wall |
NEMA Rating | 12 Indoor, dust-resistant |
Nominal Capacity Btu/h | 2,000 Btu/h |
Nominal Capacity Watts | 586 W |
Nominal Voltage | 460 V |
Number Of Phases | 1 |
Operating Temperature | -40-55 °C |
Operating Temperature | -40-131 °F |
Operating Temperature | -40-55 |
Outdoor Installation | Yes |
Product Family | SpectraCool |
Protection Rating | NEMA Type 12 |
Refrigerant | R513A |
Remote Access Control | No |
Thickness | 18 ga |
Thickness | 51.40mm (2.024") |
Thickness | 1.21 mm |
Type | Air Conditioners |
Voltage AC | 400-460 V |
Weight | 25 kg |
Weight | 46.7 lb |
Width | 254 mm |
Width | 10 IN |
Package Dimensions (L x W x H) | 20.92 IN x 10 IN x 9.9 IN |
Package Dimensions (L x W x H) | 53.1368 cm x 25.4 cm x 25.146 cm |
Package Weight (Imperial) | 46.700 L |
Package Weight (Metric) | 21.183 kg |
N210246G360
SpectraCool Compact Advanced Corrosion Protection Lvl 1 RAC, 2000BTU 460V, Lt Gray, Steel
How to Install the N210246G800 Air Conditioner
Installation guide for mounting and wiring the N210246G800 SpectraCool Air Conditioner.
Estimated time: 45m
Tools needed:
Screwdriver, Wrench, Ratchet driver
Supplies needed:
Gasket kit, 1/4-20x.625 mounting bolts, Copper conductors
- Verify Functionality
Inspect the air conditioner and verify correct functionality before mounting. If the unit has been in a horizontal position, ensure it has been upright for at least 5 minutes before operation. Refer to the nameplate for proper electrical requirements and test the unit by connecting it to a properly grounded power supply. The evaporator blower should start immediately, and after 5-10 minutes, the condenser blower and compressor should also be running. Check for excessive noise or vibration.
- Prepare Enclosure and Mount Unit
Determine if the unit will be surface or recess mounted and prepare the enclosure opening using the appropriate cutout dimensions. Ensure adequate ventilation and clearance around the installation location (24" from front, 2" from right, 9" from left, 6" from top). Install the provided gasket kit to the air conditioner. Mount the air conditioner onto the enclosure using the provided 1/4-20x.625 mounting bolts, using the "EZ" mount tabs to hold the unit in place while mounting. Torque each bolt to 65 in./lbs. Start bolts by hand before tightening with a wrench or ratchet driver to avoid cross-threading.
- Route Drain Tube
Carefully route the drain tube, ensuring it maintains a continuous downward slope and does not kink or elevate above the exit point. Failure to do so could result in overflowing the condensate drain pan.
- Connect Power Supply
Refer to the top of the nameplate for electrical requirements. Connect the power cord or wire the unit to a properly grounded power supply using copper conductors only, following applicable national wiring regulations. Ensure the electrical circuit is fused with a time delay fuse or HACR circuit breaker per the MOPD rating. Do not connect other equipment to this circuit to prevent overloading. Power supply wiring should be restrained to prevent contact with the internal fan.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.