nVent MCS20108R53R Modular Single Door Type 3R, MCS-3R, 2000x1000x800mm, Light Gray, Mild Steel
UPC: 783510582739
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Frame: Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660 Including integrated external hole pattern
- Door: Mounted with four hinges allowing left or right hand opening; including door frame with 25 mm hole pattern
- Rear panel: Fitted by M6 torx screws; standard facilities for rear door mounting
- Supplied as an accessory
- Removable roof panel
- Lock: Espagnolette 4-point locking system which does not interfere with the enclosure inner space; standard double-bit lock with 3 mm insert
- Bottom plate: Consists of three or four (D>600) pieces
- Mounting plate: Double folded and slides into position with adjustable depths of 25 mm, with the MPD02 accessory
- Earthing/Grounding: All panels are earthed through their fittings and are equipped with a separate earthing stud
- Mounting requirements: Standard delivery ready for combined installation; for stand-alone installation add side panels
Specifications
Application | Controls and Drives;Factory Automation and Process Control |
Color | Light Gray |
Color | Gray |
Color | Grey |
Color Code | RAL 7035 |
Depth | 800 mm |
Depth | 31.5 in |
Finish | Powder Coating |
Height | 78.74 in |
Height | 2,000 mm |
IP Rating | IP55 |
Material | Mild Steel |
Mounting Type | Floor-standing |
NEMA Rating | Type 3R |
Protection Rating | NEMA Type 3R |
Series | MCS-3R |
Size | 2000x1000x800mm |
Thickness | 51.40mm (2.024") |
Thickness | 16 ga |
Type | Mild Steel Modular Industrial Enclosures |
Weight | 400.5 lb |
Weight | 32 lbs./100ft |
Width | 39.37 in |
Width | 1,000 mm |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
Frequently Asked Questions
What are the dimensions of the MCS20108R53R enclosure?
The enclosure has dimensions of 2000mm height, 1000mm width, and 800mm depth.
What is the material and finish of the enclosure?
The enclosure is made of mild steel with a powder-coated light gray finish (RAL 7035).
What is the protection degree of the MCS-3R enclosure range?
The enclosure range has an IP 55 and Type 3R protection degree.
What industry standards does this enclosure meet?
It meets UL 50, 50E Listed; Type 3R; cUL Listed per CSA C22.2 No. 94; NEMA/EEMAC Type 3R; and IEC 62208 IP55.
How is the door mounted and can it open in either direction?
The door is mounted with four hinges, allowing for either left or right-hand opening.
What type of locking system does the enclosure use?
It features an Espagnolette 4-point locking system with a standard double-bit lock and 3 mm insert.
How is the mounting plate installed and adjusted?
The double-folded mounting plate slides into position with adjustable depths of 25 mm.
How are the panels earthed or grounded?
All panels are earthed through their fittings and include a separate earthing stud.
What is required for a stand-alone installation?
For stand-alone installation, side panels must be added to close the cabinets.
What is the thickness of the enclosure material?
The material thickness of the enclosure is 16ga.
How to Assemble the MCS-3R Floor Standing Enclosure
This guide provides step-by-step instructions for the complete assembly of the MCS-3R series floor standing electrical enclosure, including mounting panels, installing guiders, and securing locking systems. Ensure all safety warnings regarding combustible surfaces and environmental integrity are observed during installation.
Estimated time: 2h
Tools needed:
Wrench (SW3, SW10, SW13, SW19), Torx Driver (T25, T30)
Supplies needed:
M5x10 screws, M6x12 screws, M12x20 bolts, St. 5.5x10 screws, M8x16 bolts, Metal Guiders (4 pcs), BG01 sealing kit (optional, for IP55)
- Prepare Installation Area and Review Safety Warnings
Before starting, ensure the installation area is clear and safe. If mounting on or over a combustible surface, install a floor plate of at least 1.43 mm galvanized or 1.6 mm uncoated steel, extended at least 150 mm beyond the equipment on all sides. To maintain environmental integrity, use devices with the same environmental ratings to close any customized openings in the enclosure.
- Install Metal Guiders
Secure the four metal guiders to the enclosure frame using the M5x10 screws. Tighten each screw to a torque of 4-5.5 Nm. Refer to Pic 3a/4 in the documentation for visual guidance on placement.
- Mount Side Panels
Attach the side panels to the enclosure structure. Use the M6x12 screws and M12x20 bolts as indicated in Pic 7. Tighten the M6x12 screws to 15-20 Nm and the M12x20 bolts to 8-9 Nm (for the first tightening; subsequent tightening recommended at 4-5 Nm). Note that M12x20 bolts are used on enclosures 800mm deep and above.
- Mount Top Panel
Install the top panel using the M5x10 and M6x12 screws as shown in Pic 8. Tighten all screws to a torque of 4-5 Nm. M6x12 screws are used on enclosures 1000mm wide and above.
- Mount Back Panel
Attach the back panel to the enclosure frame using the St. 5.5x10 screws as depicted in Pic 9. Tighten these screws to a torque of 4.5-5 Nm. For specific points, tighten to 10-15 Nm. Note that some fasteners are used only on 1200mm wide enclosures.
- Mount Bottom Plates
Install the bottom plates (bottom right, bottom left, top right, top left) using the M8x16 bolts. Refer to Pic 10 for the correct orientation and fastening points. Tighten the M8x16 bolts to a torque of 10-15 Nm. Ensure the plates click into place during mounting.
- Install Lift Handle and Locking System
Mount the lift handle and the standard or lift handle locking system. For the lift handle, use a T30 driver as shown in Pic 5, ensuring the 180-degree rotation is performed correctly. For the locking systems, follow the assembly steps in Pic 6, noting the 180-degree rotation for the transparent covers (ordered separately).
- Seal Bottom Plates (Optional for IP55)
If an IP55 environmental rating is required, install the BG01 sealing kit (ordered separately) to the bottom plates. Refer to Pic 11 for the sealing procedure. This step is crucial for maintaining the specified environmental integrity.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.