Contact for Pricing
Overview
- Frame: Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660 Including integrated external hole pattern
- Door: Mounted with four hinges allowing left or right hand opening; including door frame with 25 mm hole pattern
- Rear panel: Fitted by M6 torx screws; standard facilities for rear door mounting
- Supplied as an accessory
- Removable roof panel
- Lock: Espagnolette 4-point locking system which does not interfere with the enclosure inner space; standard double-bit lock with 3 mm insert
- Bottom plate: Consists of three or four (D>600) pieces
- Mounting plate: Double folded and slides into position with adjustable depths of 25 mm, with the MPD02 accessory
- Earthing/Grounding: All panels are earthed through their fittings and are equipped with a separate earthing stud
- Mounting requirements: Standard delivery ready for combined installation; for stand-alone installation add side panels
Specifications
Application | Controls and Drives;Factory Automation and Process Control |
Color | Gray |
Color | Grey |
Color Code | RAL 7035 |
Depth | 600 mm |
Depth | 23.62 in |
Finish | Powder Coating |
Height | 2,000 mm |
Height | 78.74 in |
Material | Mild Steel |
Protection Rating | NEMA Type 3R |
Thickness | 16 ga |
Thickness | 51.40mm (2.024") |
Type | Mild Steel Modular Industrial Enclosures |
Weight | 245.59 lb |
Weight | 32 lbs./100ft |
Width | 23.62 in |
Width | 600 mm |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
How to Assemble and Mount the MCS20066R53R Floor Standing Enclosure
This guide provides step-by-step instructions for assembling and mounting the MCS20066R53R floor standing enclosure, including attaching internal components, locking systems, and panels.
Estimated time: 2h
Tools needed:
SW13 Socket Wrench, T30 Torx Wrench, SW10 Socket Wrench, SW3 Socket Wrench, T25 Torx Wrench, SW19 Socket Wrench, Torque Wrench
Supplies needed:
M5x10 screws, M5 screws, M6x12 screws, M12x20 screws, M12 nuts, St. 5.5x10 screws, M8x16 screws, Metal Guider, Lift Handle, Standard Locking System components, Lift Handle Locking System components, Top Panel, Back Panel, Bottom Plates, BG01 sealing kit (optional, for IP55)
- Review Safety Warnings
Before starting, review all safety warnings. If mounting on or over a combustible surface, install a floor plate of at least 1.43 mm galvanized or 1.6 mm uncoated steel extended at least 150 mm beyond the equipment on all sides. Ensure devices with the same environmental ratings are used to close openings to maintain enclosure integrity.
- Mount the Metal Guider
Attach the Metal Guider (Ref. A, Pic. B) to the enclosure frame using the provided M5x10 screws (Qty. 4). Tighten the screws to a torque of 4-5.5 Nm using an SW3 socket wrench.
- Install the Lift Handle
Mount the Lift Handle (Ref. 1) to the door using the specified screws (Ref. 2, 3). Ensure the handle is securely fastened according to the diagram.
- Install the Lift Handle Locking System
Assemble and install the Lift Handle Locking System components (Ref. 1, 2, 3, 4) onto the door. Verify the system allows for 180-degree rotation as shown in the diagram.
- Install the Standard Locking System
Assemble and install the Standard Locking System components (Ref. 1, 2, 3, 4) onto the door. Verify the system allows for 180-degree rotation as shown in the diagram.
- Attach the Top Panel
Position the Top Panel (Ref. A) onto the enclosure frame. Secure it using M6x12 screws (Ref. B) and M12x20 screws (Ref. C) with M12 nuts (Ref. D). For enclosures 800mm deep and above, use the specified M12x20 screws. Tighten M6x12 screws to 8-9 Nm and M12x20 screws to 15-20 Nm for the first tightening, then 4-5 Nm for subsequent tightening. Use T30 and SW19 tools.
- Attach the Back Panel
Mount the Back Panel (Ref. A) to the rear of the enclosure frame. Secure it using the provided screws (Ref. B, C). Tighten the screws to a torque of 4.5-5 Nm using a T25 tool. For 1200mm wide enclosures, use the specific screws indicated by '*'.
- Mount the Bottom Plates
Install the bottom plates (Bottom right, Bottom left, Top right, Top left) to the base of the enclosure. Secure them using M8x16 screws (Ref. A, B, C, D, E, F, G). Tighten the screws to a torque of 10-15 Nm using a T30 tool. Ensure proper orientation for mounting and unmounting as depicted.
- Seal the Bottom Plates (Optional for IP55)
If an IP55 rating is required, install the BG01 sealing kit (ordered separately) around the bottom plates. Follow the instructions for sealing, ensuring a tight fit to maintain environmental integrity.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.