nVent HGF5ETHETHCC InterSafe Data Interface Port for Ethernet, GFCI, Polycarbonate
UPC: 783510161941
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Steel and Stainless Steel doors are welded and ground
- All standard configurations include a GFCI or standard duplex receptacle with a 5-A circuit breaker for added safety
- Door gasket (between the door and plate assemblies) and plate gasket (between the plate assembly and the enclosure) together provide a tight seal
- Template provided for accurate enclosure cutout dimensions
- Quarter-turn latch with screwdriver slot and padlock hasp on all steel and stainless steel door models for convenience and security
- Quarter-turn latch with screwdriver slot on polycarbonate models
Specifications
Accessory Type | InterSafe Data Interface Ports |
Application | Arc Flash Safety;Controls and Drives;Corrosive Environments |
Application | Controls and Drives; Corrosive Environments; Arc Flash Safety |
Color | Unpainted |
Configuration | 120 VAC GFCI Receptacle |
Configuration | - 120 VAC GFCI receptacle - RJ45 - RJ45 - 5-amp circuit breaker |
Configuration 1 | RJ45 |
Finish | Smooth Matte |
IP Rating | IP66 |
Material | Composite;Polycarbonate |
Material | Polycarbonate |
Modification Services | Yes |
Mounting Type | Cutout |
Nema Rating | Type 4X |
Primary Connector Termination | - RJ45 - 10-ft. cable |
Product Family | InterSafe |
Protection Rating | NEMA Type 12 |
Series | InterSafe Data Interface Port |
Series | InterSafe |
Size | 143x176x24mm |
Supports Devices Sold By | Computer peripherals |
Thickness | 1.5 mm |
Thickness | 51.40mm (2.024") |
Thickness | 16 ga |
Type | Electrical Accessories |
Type Number | Type 4X |
Weight | 3.2 lb |
Works With | NEMA / IEC |
Package Dimensions (L x W x H) | 9.3 IN x 9 IN x 7.2 IN |
Package Dimensions (L x W x H) | 23.622 cm x 22.86 cm x 18.288 cm |
Package Weight (Imperial) | 3.200 L |
Package Weight (Metric) | 1.452 kg |
NNC75X75WH2
The NNC75X75WH2 Halogen-Free Wide Slot Wiring Duct is used to route, protect, and manage wires near sensitive electronic equipment and in environments where heat resistance or public safety is a concern. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 95 C (203 F). Halogen-Free, Polyphenylene Oxide (PPO). Mounting holes provided. 2.85" x 2.97" (72.4 mm x 75.4 mm) and 6.6' (2 m) long. Cover included. Color White. 5 pieces per package.
NE1.5X4WH6
The NE1.5X4WH6 Halogen-Free Wide Slot Wiring Duct design provides greater rigidity and allows for a wide range of wire/bundle sizes. Upper and lower scorelines for easy finger/sidewall section removal. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 95 C (203 F). Halogen-Free, Polyphenylene Oxide (PPO). Mounting holes provided. 4.06" x 1.64" (103.1 mm x 41.7 mm) and 6' (1.83 m) long. Cover sold separately. Color White. 6 pieces per package.
S289JLN
2 x 3 Inches Duct Spacer, High Impact Polystyrene Snap-Loc Intermediate Spacer For Use With Nonmetallic Ducts
S288JLN
2 x 3 Inches Duct Spacer, High Impact Polystyrene Snap-Loc Base Spacer For Use With Nonmetallic Ducts
Frequently Asked Questions
What is the material of the housing?
The housing is made of polycarbonate composite.
How long are the included Ethernet cables?
Each shielded Ethernet cable is 10 feet long with male RJ45 connectors.
What type of Ethernet connectors are used?
The port uses shielded RJ45 connectors for both primary and secondary connections.
What voltage does the GFCI receptacle support?
The GFCI receptacle operates at 120 VAC.
What is the circuit breaker rating?
The integrated circuit breaker is rated at 5 amps.
Is this port suitable for outdoor use?
The polycarbonate housing resists UV exposure, making it suitable for outdoor environments.
What devices are compatible with this port?
The HGF5ETHETHCC supports computer peripherals for programming and diagnostics.
How to Install the HGF5ETHETHCC INTERSAFE
Installation guide for mounting and wiring the HGF5ETHETHCC INTERSAFE.
Estimated time: 30m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Wire connectors
- Prepare the enclosure
Ensure the HGF5ETHETHCC enclosure is clean and free of debris. Verify all mounting hardware is present.
- Mount the enclosure
Select a suitable location for the HGF5ETHETHCC. Mount the enclosure securely using appropriate mounting screws. Refer to the datasheet for specific mounting instructions and weight limitations.
- Wire the enclosure
Open the enclosure door. Route all incoming and outgoing wires through the designated conduit openings. Connect the wires to the appropriate terminals inside the enclosure according to the wiring diagram provided on the enclosure or in the datasheet. Ensure all connections are secure and properly insulated. For specific wiring requirements, consult the product's nameplate or datasheet.
- Close and secure the enclosure
Ensure all internal wiring is tidy and does not interfere with the door closure. Close the enclosure door and secure it with the provided latch or locking mechanism.
- Verify installation
Visually inspect the mounted enclosure and all connections. If applicable, use a multimeter to verify electrical continuity and proper grounding before applying power.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.