Authorized nVent Distributor
nVent HDP5TMBCC - InterSafe Data Interface Ports for Modbus Protocol, 143x176x24mm, Polycarbonate

nVent HDP5TMBCC InterSafe Data Interface Ports for Modbus Protocol, 143x176x24mm, Polycarbonate

UPC: 783510161859

Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The nVent HDP5TMBCC InterSafe Data Interface Port enables Modbus RTU/ASCII communication in industrial control systems, supporting seamless integration with PLCs, HMIs, sensors, and actuators. This polycarbonate interface port measures 143x176x24mm, providing a secure junction for standardized data exchange while maintaining signal integrity for reliable operation. Its compact design allows flexible installation in existing enclosures or new system designs, optimizing space utilization without compromising performance. The durable polycarbonate construction resists dust, moisture, and chemical exposure, ensuring long-term reliability in harsh industrial environments. Designed for seamless integration, the HDP5TMBCC simplifies wiring by consolidating connections into a single interface, reducing installation complexity and potential points of failure. It ensures consistent data transmission across automation networks, supporting critical applications in manufacturing, process control, building automation, and utilities where reliable data acquisition and control are essential. The interface port is engineered to meet the demands of industrial automation, providing a robust solution for Modbus protocol support in diverse operational settings.
  • Modbus RTU/ASCII protocol support for industrial device compatibility
  • Polycarbonate construction (143x176x24mm) for environmental resistance
  • Compact design for flexible installation in control panels and cabinets
  • Maintains signal integrity for reliable data transmission
  • Enables standardized communication between PLCs, HMIs, sensors, and actuators

Specifications

Material
Polycarbonate
Series
InterSafe
Size
143x176x24mm
Package Dimensions (L x W x H)
9.5 IN x 9 IN x 7.25 IN
Package Dimensions (L x W x H)
24.13 cm x 22.86 cm x 18.415 cm
Package Weight (Imperial)
3.000 L
Package Weight (Metric)
1.361 kg
The NE1.5X4WH6 Halogen-Free Wide Slot Wiring Duct design provides greater rigidity and allows for a wide range of wire/bundle sizes. Upper and lower scorelines for easy finger/sidewall section removal. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 95 C (203 F). Halogen-Free, Polyphenylene Oxide (PPO). Mounting holes provided. 4.06" x 1.64" (103.1 mm x 41.7 mm) and 6' (1.83 m) long. Cover sold separately. Color White. 6 pieces per package.

NE1.5X4WH6

The NE1.5X4WH6 Halogen-Free Wide Slot Wiring Duct design provides greater rigidity and allows for a wide range of wire/bundle sizes. Upper and lower scorelines for easy finger/sidewall section removal. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 95 C (203 F). Halogen-Free, Polyphenylene Oxide (PPO). Mounting holes provided. 4.06" x 1.64" (103.1 mm x 41.7 mm) and 6' (1.83 m) long. Cover sold separately. Color White. 6 pieces per package.
The NNC75X75WH2 Halogen-Free Wide Slot Wiring Duct is used to route, protect, and manage wires near sensitive electronic equipment and in environments where heat resistance or public safety is a concern. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 95 C (203 F). Halogen-Free, Polyphenylene Oxide (PPO). Mounting holes provided. 2.85" x 2.97" (72.4 mm x 75.4 mm) and 6.6' (2 m) long. Cover included. Color White. 5 pieces per package.

NNC75X75WH2

The NNC75X75WH2 Halogen-Free Wide Slot Wiring Duct is used to route, protect, and manage wires near sensitive electronic equipment and in environments where heat resistance or public safety is a concern. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 95 C (203 F). Halogen-Free, Polyphenylene Oxide (PPO). Mounting holes provided. 2.85" x 2.97" (72.4 mm x 75.4 mm) and 6.6' (2 m) long. Cover included. Color White. 5 pieces per package.
2 x 3 Inches Duct Spacer, High Impact Polystyrene Snap-Loc Intermediate Spacer For Use With Nonmetallic Ducts

S289JLN

2 x 3 Inches Duct Spacer, High Impact Polystyrene Snap-Loc Intermediate Spacer For Use With Nonmetallic Ducts
2 x 3 Inches Duct Spacer, High Impact Polystyrene Snap-Loc Base Spacer For Use With Nonmetallic Ducts

S288JLN

2 x 3 Inches Duct Spacer, High Impact Polystyrene Snap-Loc Base Spacer For Use With Nonmetallic Ducts

Prepare for Installation of Hoffman Enclosure Components

This guide outlines essential pre-installation steps for Hoffman enclosure components, focusing on verifying dimensions and clearances to ensure a successful and accurate setup.

Estimated time: 10m

Tools needed:

Measuring tape

  1. Verify Component Dimensions

    Carefully review the provided dimensions for the enclosure component, such as 151mm, 144mm, 35mm, 3.6mm, and 10mm. Ensure you understand the exact physical requirements for the installation.

  2. Confirm Installation Clearances

    Before any drilling or physical installation, thoroughly verify that sufficient clearances exist in the intended mounting area. Ensure the component will fit without any obstructions or interference.

  3. Finalize Drill and Installation Plan

    Based on the confirmed dimensions and verified clearances, finalize your drilling and installation plan. Do not proceed with drilling or installation until all measurements and spatial requirements are fully confirmed.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.