nVent G572026G050 SpectraCool Indoor/Outdoor G57, 20000BTU 230V, Lt Gray, Steel
UPC: 783510208172
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Attractive industrial design with minimal use of visible fasteners
- Advanced Corrosion Protection Level 1 (ACP L1) Protection Includes: Protective coatings only applied to copper tubing and coils on the condenser (exterior facing) side as well as thermostat coatings
- Energy-efficient rotary compressor on most models
- Advanced Corrosion Protection Level 2 (ACP L2) Protection Includes: Everything that was coated in ACP L1, plus protective coatings applied to the evaporator (interior facing ) side and an additional wrap around the thermostat
- Cleanable, reusable aluminum mesh filter included to protect coils for maximum cooling performance in dirty environments
- Reliable mechanical thermostat on enclosure side of the unit
- All G-series come standard with two separate thermostats for cooling and heating when a heater is equipped
- Operating temperature range from -40 F/-40 C to 131 F/55 C
- Dust-resistant condenser coil allows the unit to be run filterless in most indoor applications
- Dual condenser-side air movers for performance redundancy on G52 and G57 models
Specifications
Ambient Temperature | 40 Deg C |
Ambient Temperature | 50-131 °F |
Application | Controls and Drives;Power Distribution |
Btu Rating | 20,000 |
Color | Light Gray |
Color | Gray |
Color Code | RAL 7035 |
Corrosion Resistant | No |
Depth | 15.28 in |
Depth | 388 mm |
Finish | Powder Coated |
Frequency | 50/60 Hz |
Frequency Rating | 50/60 Hz |
Frequency Rating, Maximum | 60 Hz |
Frequency Rating, Minimum | 50 Hz |
Height | 1,465 mm |
Height | 57.69 in |
Material | Mild Steel |
Material | Steel |
Max Current | 22.2 A |
Mounting | Side wall |
NEMA Rating | 4 Watertight |
Nominal Capacity Btu/h | 20,000 Btu/h |
Nominal Capacity Watts | 5,861 W |
Nominal Voltage | 230 V |
Number Of Phases | 1 |
Operating Temperature | 10-55 |
Operating Temperature | 10-55 °C |
Operating Temperature | 50-131 °F |
Outdoor Installation | Yes |
Outdoor Installation | No |
Phase | 1 Ph |
Phase | 1 |
Poles | 1PH |
Product Family | SpectraCool |
Protection Rating | NEMA Type 4 |
Refrigerant | R407C |
Remote Access Control | No |
Series | SpectraCool G57 |
Size | 20000 BTU |
Thickness | 20 ga |
Thickness | 51.40mm (2.024") |
Type | Air Conditioners |
Voltage AC | 200-250 V |
Voltage Rating | 230V |
Voltage Rating | 230 V |
Weight | 89 kg |
Weight | 224 lb |
Width | 530 mm |
Width | 20.87 in |
Package Dimensions (L x W x H) | 26 IN x 19 IN x 62.5 IN |
Package Dimensions (L x W x H) | 66.04 cm x 48.26 cm x 158.75 cm |
Package Weight (Imperial) | 224.000 L |
Package Weight (Metric) | 101.606 kg |
Frequently Asked Questions
What is the cooling capacity of the G572026G050?
The unit provides 20,000 BTUs per hour (5,861W nominal) of cooling capacity.
What voltage does this unit require?
The G572026G050 operates on 230V AC, 50/60Hz, single-phase power.
Can this unit operate in extreme temperatures?
Yes, the unit operates from -40°F to 131°F (-40°C to 55°C).
What refrigerant does this unit use?
The G572026G050 uses R134a refrigerant, which is earth-friendly and RoHS compliant.
Is this unit suitable for outdoor installation?
Yes, the SpectraCool G57 is designed for both indoor and outdoor applications.
What are the dimensions of this unit?
The unit measures 28.59in height x 17.01in width x 10.18in depth.
Does this unit require filter maintenance?
No, the filterless design eliminates routine filter maintenance while maintaining optimal airflow.
Does this unit include performance redundancy features?
Yes, it features dual condenser-side air movers for performance redundancy.
How to Install the G572026G050 Air Conditioner
This guide provides step-by-step instructions for installing and setting up the G572026G050 air conditioner, ensuring proper functionality and safety.
Estimated time: 45m
Tools needed:
Screwdriver, Wrench or ratchet driver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Mounting gasket kit, Electrical wiring
- Inspect the air conditioner
Check for any visible damage and verify functionality before proceeding with the installation.
- Install mounting gaskets
Using the provided mounting gasket kit, attach the gaskets to the air conditioner to ensure a watertight seal.
- Mount the air conditioner
Securely mount the air conditioner on the enclosure, ensuring not to damage the gaskets. Avoid dragging the unit to prevent tearing the gaskets.
- Wire the air conditioner
Refer to the nameplate for electrical requirements and connect the unit to a properly grounded power supply. Ensure the circuit is fused with a slow blow or HACR circuit breaker.
- Verify electrical phasing
For 3-phase units, check that the phase monitor light is illuminated after applying power to confirm correct electrical phasing.
- Connect the thermostat
If required, wire the remote thermostat outputs to the appropriate terminals on the 24 VAC terminal strip according to the wiring diagram.
- Set the thermostat
Adjust the thermostat to the desired cabinet temperature, following the guidelines in the Sequence of Operation.
- Allow the unit to stabilize
Keep the air conditioner upright for at least five minutes before starting to ensure proper operation.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.