Contact for Pricing
Overview
- Attractive industrial design with minimal use of visible fasteners
- Level 1 Protection Includes: Protective coatings only applied to copper tubing and coils on the condenser (exterior facing) side as well as thermostat coatings
- Energy-efficient rotary compressor on most models
- Level 2 Protection Include: Everything that was coated in Level 1, plus protective coatings applied to the evaporator (interior facing ) side and an additional wrap around the thermostat
- Cleanable, reusable aluminum mesh filter included to protect coils for maximum cooling performance in dirty environments
- R407C, R513A or R134a refrigerants
- 115, 230 and 400/460 VAC 3-phase power input on most models
- Reliable mechanical thermostat on enclosure side of the unit
- All G-series come standard with two separate thermostats for cooling and heating when a heater is equipped
- Operating temperature range from -40 F/-40 C to 131 F/55 C
Specifications
Ambient Temperature | 40 Deg C |
Ambient Temperature | -40-131 °F |
Application | Controls and Drives;Power Distribution |
Btu Rating | 8,000 |
Color | Light Gray |
Color | Gray |
Color Code | RAL 7035 |
Connection Type | 208-230V dual A-B power feed |
Connection Type | Dual A-B Power Feed |
Corrosion Resistant | No |
Current Rating | 10 A |
Depth | 11.66 in |
Depth | 296 mm |
Finish | Powder Coated |
Frequency | 50/60 Hz |
Frequency Rating | 50/60 Hz |
Frequency Rating, Maximum | 60 Hz |
Frequency Rating, Minimum | 50 Hz |
Height | 52.69 in |
Height | 1,338 mm |
Material | Mild Steel |
Material | Steel |
Max Current | 7 A |
Mounting | Side wall |
Mounting Type | Partial recess |
Mounting Type | Partial Recess Mount |
NEMA Rating | 4 Watertight |
Nominal Capacity Btu/h | 8,000 Btu/h |
Nominal Capacity Watts | 2,300 W |
Nominal Voltage | 230 V |
Number Of Phases | 1 |
Operating Temperature | -40-131 |
Operating Temperature | -40-55 |
Operating Temperature | -40-55 °C |
Outdoor Installation | Yes |
Phase | 1 |
Phase | 1 Ph |
Product Family | SpectraCool |
Protection Rating | NEMA Type 4 |
Refrigerant | R513A |
Remote Access Control | No |
Series | SpectraCool G52 |
Size | 8000 BTU |
Thickness | 51.40mm (2.024") |
Thickness | 20 ga |
Type | Air Conditioners |
Voltage AC | 200-250 V |
Voltage Rating | 230/208-230 V |
Voltage Rating | 230 V |
Weight | 58.1 kg |
Weight | 165 lb |
Width | 435 mm |
Width | 17.12 in |
Package Dimensions (L x W x H) | 19 IN x 16 IN x 55 IN |
Package Dimensions (L x W x H) | 48.26 cm x 40.64 cm x 139.7 cm |
Package Weight (Imperial) | 165.000 L |
Package Weight (Metric) | 74.844 kg |
Frequently Asked Questions
What is the nominal cooling capacity of the G520826G101?
The nVent SpectraCool G520826G101 has a nominal cooling capacity of 8000 BTU/Hr, equivalent to 2300 Watts.
What is the required supply voltage for this unit?
This unit operates on a 208-230V dual A-B power feed.
What type of mounting does the G520826G101 support?
The G520826G101 is designed for partial recess mounting.
Does this unit require air filters?
No, the nVent SpectraCool G520826G101 features a filterless design, reducing maintenance needs in dusty environments.
What are the water connection specifications?
It includes a 2-way water valve with actuator and supports 1"/25 mm pipe connections at the back, top, or bottom.
What is the operating range for the voltage?
The operating range for the voltage is +/- 10% of the rated voltage.
How to Install the G520826G101 Air Conditioner
This guide provides step-by-step instructions for installing and configuring the G520826G101 air conditioner, ensuring proper functionality and safety.
Estimated time: 45m
Tools needed:
Screwdriver, Wrench, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Gasket kit, Wire connectors
- Inspect the air conditioner
Check the air conditioner for any visible damage and ensure it is functioning correctly before proceeding with the installation.
- Install mounting gaskets
Use the gasket kit provided with the unit to install gaskets on the air conditioner to ensure a watertight seal.
- Mount the air conditioner
Securely mount the air conditioner on the enclosure, ensuring not to damage the installed gaskets. Avoid dragging the unit to prevent tearing the gaskets.
- Wire the air conditioner
Refer to the nameplate for electrical requirements and wire the unit to a properly grounded power supply using copper conductors. Ensure the circuit is fused appropriately.
- Connect the thermostat
If required, wire the remote thermostat outputs to the appropriate terminals on the 24 VAC terminal strip, following the wiring diagram.
- Set the thermostat
Adjust the thermostat to the desired cabinet temperature, ensuring it is set within the operational range specified in the manual.
- Power on the unit
Allow the air conditioner to remain upright for at least five minutes before powering it on. After powering, verify that the evaporator blower starts running.
- Test functionality
Run the air conditioner for five to ten minutes and check that the compressor operates correctly and that the condenser air temperature is warmer than the ambient temperature.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.