Authorized nVent Distributor
nVent G520816G100 - SpectraCool Outdoor Without Heat G52, 8000BTU 115V, Lt Gray, Steel

nVent G520816G100 SpectraCool Outdoor Without Heat G52, 8000BTU 115V, Lt Gray, Steel

UPC: 783510205034


Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

nVent SpectraCool G52 Outdoor AC (SKU: G520816G100) delivers 8,000 BTU/Hr cooling for outdoor enclosures. Powered by 115V, it features a light gray steel enclosure and operates filterless to reduce maintenance in harsh conditions. Designed for sensitive electronics and control panels, it ensures reliable thermal management in manufacturing, utilities, and telecom. Applications include electrical enclosures, telecom shelters, and outdoor kiosks. The filterless design eliminates routine filter changes, reducing downtime and costs in remote locations. Built for durability, it withstands dust and moisture. Installation includes pre-drilled mounting points and standard electrical connections. A cost-effective, low-maintenance solution for outdoor industrial equipment protection.
  • Attractive industrial design with minimal use of visible fasteners
  • Advanced Corrosion Protection Level 1 (ACP L1) Protection Includes: Protective coatings only applied to copper tubing and coils on the condenser (exterior facing) side as well as thermostat coatings
  • Energy-efficient rotary compressor on most models
  • Advanced Corrosion Protection Level 2 (ACP L2) Protection Includes: Everything that was coated in ACP L1, plus protective coatings applied to the evaporator (interior facing ) side and an additional wrap around the thermostat
  • Cleanable, reusable aluminum mesh filter included to protect coils for maximum cooling performance in dirty environments
  • Reliable mechanical thermostat on enclosure side of the unit
  • All G-series come standard with two separate thermostats for cooling and heating when a heater is equipped
  • Operating temperature range from -40 F/-40 C to 131 F/55 C
  • Dust-resistant condenser coil allows the unit to be run filterless in most indoor applications
  • Dual condenser-side air movers for performance redundancy on G52 and G57 models

Specifications

Ambient Temperature
-40-131 °F
Ambient Temperature
40 Deg C
Amperage Rating
11.4;9.9 A;A
Amperage Rating
9.9/11.4 A
Application
Controls and Drives;Power Distribution
Btu Rating
8,000
Color
Light Gray
Color
Gray
Color Code
RAL 7035
Corrosion Resistant
No
Depth
296 mm
Depth
11.66 in
Finish
Powder Coated
Frequency Rating
50/60 Hz
Frequency Rating, Maximum
60 Hz
Frequency Rating, Minimum
50 Hz
Height
1,338 mm
Height
52.69 in
Material
Mild Steel
Material
Steel
Max Current
11.4 A
Mounting
Side wall
Mounting Type
Wall-mounted
NEMA Rating
4 Watertight
Nominal Capacity Btu/h
8,000 Btu/h
Nominal Capacity Watts
2,300 W
Nominal Voltage
115 V
Number Of Phases
1
Operating Temperature
-40-131 °F
Operating Temperature
-40-55 °C
Operating Temperature
-40-55
Outdoor Installation
Yes
Phase
1
Phase
1 Ph
Power
1111/1332 W
Product Family
SpectraCool
Protection Rating
NEMA Type 4
Refrigerant
R513A
Remote Access Control
No
Series
SpectraCool G52
Size
8000 BTU
Thickness
20 ga
Thickness
51.40mm (2.024")
Type
Air Conditioners
Voltage AC
100-120 V
Voltage Rating
115 V
Weight
58.1 kg
Weight
160 lb
Width
435 mm
Width
17.12 in
Package Dimensions (L x W x H)
19 IN x 16 IN x 55 IN
Package Dimensions (L x W x H)
48.26 cm x 40.64 cm x 139.7 cm
Package Weight (Imperial)
160.000 L
Package Weight (Metric)
72.576 kg
T-Series Mid-Size Outdoor without Heat T43, 6000BTU 115V, Lt Gray, Steel

T430616G100

T-Series Mid-Size Outdoor without Heat T43, 6000BTU 115V, Lt Gray, Steel
DTT 6201 230V SC 7035

13256241055

DTT 6201 230V SC 7035
AC UNIT 12-20000BTU 230V N3R/4

DTS3461C230N3GY

AC UNIT 12-20000BTU 230V N3R/4
InRow RC 300mm Chilled Water

ACRC301S

InRow RC 300mm Chilled Water
SpectraCool Outdoor Without Heat G52, 12000BTU 230V, Lt Gray, Steel

G521226G100

SpectraCool Outdoor Without Heat G52, 12000BTU 230V, Lt Gray, Steel
SpectraCool Indoor G57, 20000BTU 230V, Brushed, SS304

G572026G051

SpectraCool Indoor G57, 20000BTU 230V, Brushed, SS304
SpectraCool Outdoor Without Heat G28, 6000BTU 230V, Lt Gray, Steel

G280626G100

SpectraCool Outdoor Without Heat G28, 6000BTU 230V, Lt Gray, Steel
SpectraCool Indoor G52, 12000BTU 230V, Brushed, SS304

G521226G051

SpectraCool Indoor G52, 12000BTU 230V, Brushed, SS304

How to Install the G520816G100 Air Conditioner

This guide provides step-by-step instructions for installing and configuring the G520816G100 air conditioner, ensuring proper functionality and safety.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Terminal connectors, Mounting gasket kit

  1. Inspect the air conditioner

    Check the air conditioner for any visible damage and verify its functionality before mounting. Ensure it has been upright for at least five minutes if it was previously horizontal.

  2. Install mounting gaskets

    Using the mounting gasket kit provided, apply the gaskets to the air conditioner to create a seal between the unit and the enclosure.

  3. Mount the air conditioner

    Securely mount the air conditioner to the enclosure, ensuring not to damage the gaskets. Start bolts by hand to avoid cross-threading before tightening with a wrench.

  4. Wire the air conditioner

    Refer to the nameplate for electrical requirements and wire the unit to a properly grounded power supply. Ensure the circuit is fused with a slow blow or HACR circuit breaker.

  5. Connect the thermostat

    If required, wire the remote thermostat outputs to the appropriate terminals on the 24 VAC terminal strip according to the wiring diagram.

  6. Set the thermostat

    Adjust the thermostat to the desired cabinet temperature, following the Sequence of Operation for guidance on settings.

  7. Test the air conditioner

    After wiring, energize the unit and verify that the evaporator blower starts running. Ensure the compressor operates by setting the thermostat below the ambient temperature.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.