Contact for Pricing
Overview
- Lay-In Hinged Cover Reducer allows the lay-in feature to be retained when reducing to a smaller wireway size
- Durable 16 gauge steel construction
- ANSI 61 gray polyester powder paint finish
- Lay-in design for easy wire access
- Hinged cover for convenient installation and maintenance
Specifications
Application | Power Distribution |
Color | Gray |
Color Code | ANSI 61 |
Finish | Galvanized |
Height | 44 IN |
Height | 2.52 |
Height | 64 |
IP Rating | IP54 |
Material | Steel |
Material | Mild Steel |
Modification Services | Yes |
NEMA Rating | 12 |
NEMA Rating | 12 Indoor, dust-resistant |
Protection Rating | NEMA Type 12 |
Reduces From | 6.00 x 6.00 in |
Reduces From | 4.00 x 4.00 in |
Reduces To | 2.50 x 2.50 in |
Reduces To | 4.00 x 4.00 in |
Sealing Plate Quantity | 0 |
Sealing Plate Type | None |
Size | 6x6 to 4x4 |
Thickness | 1.9 mm |
Thickness | 14 ga |
Thickness | 51.40mm (2.024") |
Type | Reducer |
Type | Industrial Lay-in Wireway;Reducer |
Type Number | Type 12 |
Weight | 3.7 lb |
Width | 2.5 |
Width | 64 |
Width | 23 IN |
Wireway | Lay-In NEMA Type 12 Wireway |
Package Dimensions (L x W x H) | 8.5 IN x 8 IN x 4.8 IN |
Package Dimensions (L x W x H) | 21.59 cm x 20.32 cm x 12.192 cm |
Package Weight (Imperial) | 3.700 L |
Package Weight (Metric) | 1.678 kg |
LDPH10IG6-A
The LDPH10 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 1.52 inches wide by 0.86 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is International Gray.How to Install the Lay-In Wireway
This guide provides step-by-step instructions for installing and sealing a Lay-In Wireway for effective cable management.
Estimated time: 1h
Tools needed:
Screwdriver, Drill, Wrench
Supplies needed:
Mounting screws, Gaskets, Nuts, Sealing plates
- Assemble the wireway sections
Place a gasket between the flanges of the wireway sections and secure them using screws and nuts as shown in the assembly details.
- Seal the joints
For joints between lay-in sections, use the LSGQR fitting, leaving out the top flange screw on the hinge side. Install the fitting with a shoulder bolt through the flange and ensure gaskets are visible from above.
- Install box entries
Make a cutout in the enclosure for the wireway entry. Position the box connector and a gasket inside the enclosure, then install a 90° angle sealing plate between the wireway section and the enclosure surface.
- Adjust telescope fitting
Assemble the compression ring, gasket, and retainer on the telescope fitting. Insert the body into the straight section and adjust to the desired length, ensuring the gasket is properly positioned.
- Anchor the telescope fitting
If the telescope fitting is used vertically, drill .25 inch diameter holes through the sides and bottom of the straight section and telescope fitting. Install .25−20x.5 screws through the holes and secure with cap nuts and lockwashers.
- Calibrate the wireway
After installation, verify that all sections are securely fastened and that there are no gaps in the sealing. Use a multimeter to check for continuity if the wireway is used for grounding.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.