nVent ESSH5020 - Solar Shield Top, fits 500x200mm, Gray, Aluminum
nVent

ESSH5020

UPC: 783510373597

Documents & Media
Installation Instructions

Contact for Pricing

Overview

Protect your critical electrical and electronic equipment from the detrimental effects of solar radiation with the nVent HOFFMAN Solar Shield Top (SKU: ESSH5020). Designed to fit 500x200mm enclosures, this gray aluminum shield is an essential accessory for outdoor installations where temperature regulation and environmental protection are paramount. The primary function of the Solar Shield Top is to mitigate solar heat gain, a significant factor that can lead to overheating within enclosures. By absorbing and dissipating solar energy, it effectively reduces the internal temperature rise, safeguarding sensitive components from thermal stress and premature failure. This proactive approach to thermal management is crucial for maintaining the operational integrity and longevity of your equipment, especially in demanding industrial and commercial environments. Beyond temperature control, the Solar Shield Top also serves as a robust drip shield. Its strategic design deflects falling liquids, such as rain or condensation, away from the enclosure's door sealing surface. This feature is vital for preserving the integrity of the enclosure's ingress protection (IP) rating, preventing moisture ingress that could lead to corrosion, short circuits, or other costly damage. Maintaining the enclosure's rating is non-negotiable for reliable operation in harsh outdoor conditions. nVent HOFFMAN's extensive research into the impact of solar radiation on enclosures has validated the significant benefits of employing shielding solutions. Shielding is recognized as a highly effective and cost-efficient method for reducing solar heat gain in outdoor electrical and electronic applications. Test results consistently demonstrate that a top-mounted solar shield, like the ESSH5020, can achieve a notable reduction in temperature rise, often around 25 percent, directly attributable to solar heat load. This translates to more stable operating temperatures and enhanced equipment reliability. Key features and benefits include: * **Superior Solar Heat Mitigation:** Significantly reduces internal enclosure temperature rise caused by direct sunlight. * **Effective Drip Shielding:** Protects door seals from liquid ingress, maintaining enclosure integrity and IP rating. * **Durable Aluminum Construction:** Provides robust protection and long-lasting performance in outdoor environments. * **Easy Installation:** Designed for straightforward mounting to 500x200mm enclosures, including necessary mounting hardware. * **Maintains Enclosure Rating:** Ensures that the addition of the shield does not compromise the original ingress protection of the enclosure. This Solar Shield Top is an indispensable component for a wide range of applications, including telecommunications equipment, industrial control systems, renewable energy infrastructure (solar and wind farms), traffic control systems, and any outdoor electrical enclosure exposed to direct sunlight. By investing in the nVent HOFFMAN Solar Shield Top, you are investing in the reliability, longevity, and optimal performance of your valuable equipment. Trust in nVent HOFFMAN, a leader in enclosure solutions, to provide the protection your critical systems demand.
  • Solar Shield Top provides a vented area on top of the enclosure to absorb solar heating effects and help keep enclosure cool
  • Provides a drip shield to keep liquids away from the door sealing surface
  • Includes mounting hardware
  • Shielding Effectiveness nVent HOFFMAN's research of the effects of solar radiation on enclosures has shown the positive benefits of utilizing shielding to decrease temperature rise
  • Shielding has been found to be an effective, low-cost method of reducing solar heat gain in outdoor electrical/electronic applications
  • Test results indicate that a top-mounted solar shield provides a 25 percent reduction in temperature rise due to solar heat load

Specifications

Application
Datacom and Telecom Equipment
Color
Light Gray
Color
Gray
Color
Grey
Color Code
RAL 7035
Finish
Powder Coated
Finish
Gray;Powder Coating
Fits
Opening 12 x 2.5 in. or up to 12 x 5 in. with quantity 2 overlapping
Fits
500 x 200 mm
Material
Aluminum
Modification Services
Yes
Product Family
ComLine
Series
COMLINE
Size
500x200mm
Thickness
2 mm
Thickness
0.08
Thickness
2
Type
Networking Accessories
Weight
4 lb
Package Dimensions (L x W x H)
22.25 IN x 14 IN x 4.62 IN
Package Dimensions (L x W x H)
56.515 cm x 35.56 cm x 11.7348 cm
Package Weight (Imperial)
4.000 L
Package Weight (Metric)
1.814 kg
Ethernet SHDSL Extender

DDW-120

Ethernet SHDSL Extender
Fiber cable ODC to SC duplex - 670mm

Fiber cable ODC SC Duplex 670mm

Fiber cable ODC to SC duplex - 670mm
Power supply for DIN-rail

PS-60

Power supply for DIN-rail
DIN Rail ? DIN 35

ARH 1656

DIN Rail ? DIN 35
Surge-Trap® Surge Protective Device is a no-fuse surge suppressor. The Surge-Trap is a UL 1449 Third Edition compliant modular style surge protective device that is DIN-rail mountable featuring a fail-safe self-protected design, visual indicator and a small foot print. A remote indicator option provides status to critical control circuit. The Surge-Trap provides advanced overvoltage protection utilizing Mersen's patented TPMOV® technology without additional protection devices. 480 Volts 3P Delta system type without N-G mode, with microswitch .

ST4803PDGM

Surge-Trap® Surge Protective Device is a no-fuse surge suppressor. The Surge-Trap is a UL 1449 Third Edition compliant modular style surge protective device that is DIN-rail mountable featuring a fail-safe self-protected design, visual indicator and a small foot print. A remote indicator option provides status to critical control circuit. The Surge-Trap provides advanced overvoltage protection utilizing Mersen's patented TPMOV® technology without additional protection devices. 480 Volts 3P Delta system type without N-G mode, with microswitch .
Super-Safeway® Multiple Outlet Box, Extended Depth, 2-Sided, F2 (1/2") Cord Grip Body, with Flip Lids for (2) Duplex Not Included

3085

Super-Safeway® Multiple Outlet Box, Extended Depth, 2-Sided, F2 (1/2") Cord Grip Body, with Flip Lids for (2) Duplex Not Included
Cable Manager, fits 19-inch open rack, Black, Steel

ECK19H

Cable Manager, fits 19-inch open rack, Black, Steel
ON OFF SPST Nickel Pull Chain with Cord

75102CW

ON OFF SPST Nickel Pull Chain with Cord
6U PERF PANEL

PPFS19010BK

6U PERF PANEL
This TX6A 10Gig Cat 6A STP Patch Cord is a 12-Meter, Int'l Grey cord constructed of 26 AWG, shielded, twisted pair, stranded, CM/LSZH cable and with high-performance modular plugs. Its tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. The slender strain relief boot provides easy access in high-density applications. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.

STP6X12MIG

This TX6A 10Gig Cat 6A STP Patch Cord is a 12-Meter, Int'l Grey cord constructed of 26 AWG, shielded, twisted pair, stranded, CM/LSZH cable and with high-performance modular plugs. Its tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. The slender strain relief boot provides easy access in high-density applications. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.
OM1 2 fiber, 16mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std IL

F62ERLNSNSNM002

OM1 2 fiber, 16mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std IL
Membrane plate cable entry system offers a good strain relief while maintaining IP/NEMA ingress sealing rating. The CESUM3-C15 is a Rectangular Un-Terminated Cable Entry System, 4.1" (103 mm) Long, with 8 Openings 0.12" (3.0 mm) to 0.31" (8 mm), 3 Openings 0.20" (5.1 mm) to 0.35" (9.0 mm), 4 Openings 0.3" (7.5 mm) to 0.47" (12.0 mm). Color is Black. Standard Package Quantity is 1 PC.

CESUM3-C15

Membrane plate cable entry system offers a good strain relief while maintaining IP/NEMA ingress sealing rating. The CESUM3-C15 is a Rectangular Un-Terminated Cable Entry System, 4.1" (103 mm) Long, with 8 Openings 0.12" (3.0 mm) to 0.31" (8 mm), 3 Openings 0.20" (5.1 mm) to 0.35" (9.0 mm), 4 Openings 0.3" (7.5 mm) to 0.47" (12.0 mm). Color is Black. Standard Package Quantity is 1 PC.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.