nVent A90XD6EW24FTCLP - Sequestr External Disconnect Pkg Wht In Type 12, 90.12x236.00x24.12, Gray, Steel
nVent

A90XD6EW24FTCLP

UPC: 783510169671

Documents & Media
Installation Instructions

Contact for Pricing

Overview

Enhance safety and operational efficiency in industrial environments with the nVent Sequestr External Disconnect Package (SKU: A90XD6EW24FTCLP). This robust gray steel enclosure is engineered to significantly mitigate arc flash hazards when performing maintenance or adjustments on internal enclosure components. By providing a secure external point of isolation, it effectively disconnects incoming power from the main electrical enclosure, safeguarding personnel and preventing potential damage to sensitive equipment. Designed for new installations, the Sequestr External Disconnect Package arrives as a single, integrated unit, simplifying the setup process. It features a pre-mounted disconnect switch and fuse block or circuit breaker, all housed within a durable Type 12 enclosure. This thoughtful design ensures that all necessary disconnect components are readily accessible externally, eliminating the need to open the main enclosure for power isolation. Terminal connections are strategically placed to facilitate a seamless transfer of power to the primary enclosure, streamlining the overall electrical system integration. The nVent Sequestr External Disconnect Package boasts an impressive IP66 rating, signifying its superior protection against dust ingress and high-pressure water jets, making it suitable for demanding industrial applications where environmental resilience is paramount. Its NEMA Type 12 rating further confirms its suitability for indoor use, protecting against falling dirt, circulating dust, and dripping or light splashing of liquids. The compact dimensions of 90.12x236.00x24.12mm allow for flexible mounting options without compromising valuable space. Key benefits and features include: * **Arc Flash Mitigation:** Dramatically reduces arc flash risk by isolating incoming power externally. * **Integrated Design:** Shipped as a single unit with pre-mounted disconnect switch and fuse block/circuit breaker for simplified installation. * **Environmental Protection:** IP66 and NEMA Type 12 ratings ensure robust protection against dust, water, and other environmental contaminants. * **Durable Construction:** Fabricated from high-quality steel for long-lasting performance in harsh industrial settings. * **Enhanced Safety:** Facilitates safe maintenance and operational procedures by providing a clear point of power disconnect. This Sequestr External Disconnect enclosure is an essential component for any facility prioritizing electrical safety and operational continuity. Industries such as manufacturing, processing plants, and utility operations can significantly benefit from the enhanced safety protocols this product enables. Trust nVent, a recognized leader in electrical enclosure solutions, to provide reliable and innovative products that meet the stringent demands of modern industrial electrical systems. The SKU A90XD6EW24FTCLP represents a commitment to safety and efficiency in power distribution.
  • Interlocks doors of main control cabinet when disconnect switch is powered ON
  • Mechanical interlock on main control enclosure activated by master door prevents slave door from being opened first
  • Provision for pass-through power into the main enclosure
  • Preferred disconnect cutout
  • Quarter-turn, screwdriver slot latch on Sequestr Enclosure
  • Rugged PowerGlide Handle with three-point latch on main control enclosure
  • Concealed, easy-to-remove hinges
  • Grounding studs on body
  • Bonding provision on door
  • Conductive back panel included in Sequestr External Disconnect Enclosure

Specifications

Application
Power Distribution; Arc Flash Safety; Controls and Drives
Depth
613 mm
Depth
24.12 in
Exterior Color
Gray
Exterior Color Code
ANSI 61
Finish
Powder Coated
Height
2,289 mm
Height
90.12 in
Interior Color
White
IP Rating
IP55
Large Panel
A90PM78
Large Panel Quantity
3
Material
Steel
Material
Mild Steel
Modification Services
Yes
NEMA Rating
12 Indoor, dust-resistant
Panel Size
78.00 x 72.00 in
Panel Size
1981 x 1829 mm
Product Family
Sequestr
Protection Rating
NEMA Type 12
Size
90.12x197.75x24.12 in
Thickness
1.52 mm
Thickness
16 ga
Type
Mild Steel Freestanding Industrial Disconnect Enclosures
Type Number
Type 12
Weight
2,896 lb
Width
5,994 mm
Width
236 in
Package Dimensions (L x W x H)
246 IN x 36 IN x 94.25 IN
Package Dimensions (L x W x H)
624.84 cm x 91.44 cm x 239.395 cm
Package Weight (Imperial)
2896.000 L
Package Weight (Metric)
1313.626 kg
Sequestr External Disconnect Pkg Wht In Type 12, 90.12x197.75x24.12, Gray, Steel

A90XD5EW24FTCLP

Sequestr External Disconnect Pkg Wht In Type 12, 90.12x197.75x24.12, Gray, Steel

How to Install the Sequestr External Disconnect Enclosure

This guide provides step-by-step instructions for installing the Sequestr external disconnect enclosure to a control enclosure, ensuring proper mounting, wiring, and configuration.

Estimated time: 1h

Tools needed:

Screwdriver, Wire strippers, Multimeter, Drill

Supplies needed:

Mounting screws, Terminal connectors, Hoffman hole seal, Hoffman blank adapter plate

  1. Power Down the System

    Turn off the local disconnect in the control enclosure and the feeder disconnect. Put on appropriate Personal Protective Equipment (PPE) and open the control enclosure.

  2. Remove Old Hardware

    Remove the existing disconnect from the control enclosure and seal the existing hole using a Hoffman hole seal. Cover and protect all components inside the control enclosure.

  3. Mount the Sequestr Enclosure

    Remove the subpanel from the Sequestr enclosure. Hang the Sequestr enclosure on the side of the control enclosure using M6x16mm bolts and secure it with washer head cap screws from inside the control enclosure.

  4. Install the Circuit Breaker

    Drill mounting holes for the circuit breaker in the panel. Install the circuit breaker according to the manufacturer's instructions and secure the panel back into the Sequestr enclosure.

  5. Wiring Connections

    Install conduit and wires to the incoming side of the circuit breaker in the Sequestr enclosure. Ensure all connections are secure and compliant with electrical standards.

  6. Power Up the System

    Remove any protective coverings, verify the operator handle is in the 'OFF' position, and securely close the Sequestr and control enclosure doors. Turn on the feeder disconnect switch and flip the operator handle to the 'ON' position.

  7. Verify Operation

    Check that the system operates correctly with the new electrical connection. If issues arise, do not attempt to make alterations; contact customer service.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.