Authorized nVent Distributor
nVent A84XM7824SSN4 - Floor-Mount Disconnect 2-Door 3pt Latch Type 4X, 84x78x24, Brushed, SS304

nVent A84XM7824SSN4 Floor-Mount Disconnect 2-Door 3pt Latch Type 4X, 84x78x24, Brushed, SS304

UPC: 783510111335


Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The nVent A84XM7824SSN4 is a two-door, floor-mount disconnect enclosure constructed from SS304 stainless steel with a brushed finish. Measuring 84 inches high, 78 inches wide, and 24 inches deep, this enclosure provides ample space for housing electronic controls, disconnect switches, and circuit breakers from leading manufacturers such as Allen-Bradley, ABB Controls, Eaton Cutler-Hammer, General Electric, Siemens ITE, and Schneider Square D. Its 3-point latch mechanism ensures secure access control. The enclosure is ideal for applications in food and beverage, packaging, water treatment, petroleum refining, and chemical manufacturing environments where noncorrosive or mildly corrosive elements are present.
  • Disconnect enclosure is designed to house electronic controls
  • Seams continuously welded and ground smooth
  • Body stiffeners in larger enclosures for extra rigidity
  • Body flange trough collar excludes liquids and contaminants
  • Heavy-duty lifting eyes anchor into reinforced top
  • Removable centerposts permit easy panel installation
  • Heavy-gauge continuous hinges
  • Heavy-duty 3-point latching mechanism operated by Type 316L stainless steel PowerGlide padlocking handle on all doors
  • Panel supports
  • Data pocket is high-impact thermoplastic

Specifications

Application
Arc Flash Safety; Corrosive Environments; Controls and Drives
Application
Arc Flash Safety;Controls and Drives;Corrosive Environments
Color
Unpainted
Color
Brushed
Conductive Panel
A84PM78G
Depth
613
Depth
613 mm
Depth
24.12 in
Door Quantity
2-2
Finish
Brushed #4
Height
84.12 in
Height
2,137
Height
2,137 mm
IP Rating
IP66
Material
SS304
Material
Stainless Steel 304
Material
Stainless Steel;Stainless Steel 304
Modification Services
Yes
Mounting Type
Floor-Mount
NEMA Rating
4X Watertight, corrosion-resistant
Nema Rating
Type 3R, 4, 4X, 12
NEMA Rating
4X
Nema Rating
Type 4X
Panel
A84PM78
Panel Size
1829 x 1829 mm
Panel Size
72.00 x 72.00 in
Protection Rating
NEMA Type 12
Size
84 x 78 x 24 inches
Size
84x78x24
Size
84x78x24 inches
Size
84.12x40.25x24.12 in
Thickness
2.78 mm
Thickness
12 ga
Thickness
51.40mm (2.024")
Type
Stainless Steel Freestanding Industrial Disconnect Enclosures
Type Number
Type 3R
Weight
769 lb
Width
1,994 mm
Width
78.5 in
Width
1,994
Package Dimensions (L x W x H)
84 IN x 36 IN x 93.5 IN
Package Dimensions (L x W x H)
213.36 cm x 91.44 cm x 237.49 cm
Package Weight (Imperial)
769.000 L
Package Weight (Metric)
348.818 kg
Panel 6.9 x 4.9 - Fits Encl. 8 x 6 - Alum

14A0705

Panel 6.9 x 4.9 - Fits Encl. 8 x 6 - Alum
Eclipse Inner Panel - Fits Encl. 30 x 30 - Steel/Wht

EP3030

Eclipse Inner Panel - Fits Encl. 30 x 30 - Steel/Wht
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black

LH38

Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
EP-RJG-M20-BL-A

1SNG618003R0000

EP-RJG-M20-BL-A
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey

LN43DA

1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey

LT20D-NEW

1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
External operation handle 0-1 type S01 Red Nema 4,4x

140E2911

External operation handle 0-1 type S01 Red Nema 4,4x
External operation handle 0-1 type S3 Black IP65

14333111

External operation handle 0-1 type S3 Black IP65
12,80" x 12,80" filter fan - 115Vac - 285.3 cfm - RAL 7035 - Type 12

FF20A115UE1

12,80" x 12,80" filter fan - 115Vac - 285.3 cfm - RAL 7035 - Type 12
5,90" x 5,90" filter fan - 24Vdc - 20.6 cfm - RAL 9005 - Type 3R - IP55

FF12D24NN53

5,90" x 5,90" filter fan - 24Vdc - 20.6 cfm - RAL 9005 - Type 3R - IP55

Frequently Asked Questions

What are the dimensions of the A84XM7824SSN4 enclosure?

The enclosure measures 84 inches in height, 78 inches in width, and 24 inches in depth.

What materials is the enclosure made from?

The enclosure is constructed from SS304 stainless steel with a brushed finish.

What types of components can be housed in this enclosure?

The enclosure is designed to house electronic controls, disconnect switches, and circuit breakers from manufacturers like Allen-Bradley, ABB Controls, Eaton Cutler-Hammer, General Electric, Siemens ITE, and Schneider Square D.

Is this enclosure suitable for outdoor use?

Yes, the enclosure is designed for both indoor and outdoor environments.

How to Install the A84XM7824SSN4 Controller

This guide provides step-by-step instructions for installing and configuring the A84XM7824SSN4 controller, ensuring proper mounting, wiring, and initial setup.

Estimated time: 1h

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Wire connectors, Shims (if necessary)

  1. Mount the controller

    Secure the A84XM7824SSN4 controller to the designated mounting surface using appropriate mounting screws. Ensure the controller is level and firmly attached.

  2. Connect the wiring

    Use wire connectors to connect the power and signal wires to the controller terminals. Ensure all connections are tight and secure to prevent any electrical issues.

  3. Verify the connections

    Utilize a multimeter to check the voltage at the controller terminals. Ensure that the voltage matches the specifications outlined in the controller's manual.

  4. Configure the controller settings

    Access the controller's configuration interface and input the necessary parameters as per your application requirements. Refer to the user manual for specific configuration settings.

  5. Calibrate the controller

    Follow the calibration procedure outlined in the user manual to ensure the controller operates accurately. This may involve adjusting settings based on feedback from connected devices.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.