nVent A84XM4EW24FTCLP Heavy-Duty Disconnect White Inside LP Type 12, 84.12x158.00x24.12, Gray, Steel
UPC: 783510136147
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Seams continuously welded and ground smooth
- Body stiffeners in larger enclosures for extra rigidity
- Body flange trough excludes liquids and contaminants
- Heavy-duty lifting eyes anchor into reinforced top
- Removable centerposts permit easy panel installation
- Concealed, easy-to-remove hinges
- Heavy-duty 3-point latching mechanism operated by padlocking handle on all doors
- Panel supports
- Data pocket is high-impact thermoplastic
- Oil-resistant gasket
Specifications
Application | Arc Flash Safety;Controls and Drives;Power Distribution |
Application | Arc Flash Safety; Power Distribution; Controls and Drives |
Depth | 613 mm |
Depth | 24.12 in |
Depth | 613 |
Exterior Color | Gray |
Exterior Color Code | ANSI 61 |
Finish | Powder Coated |
Height | 84.12 in |
Height | 2,137 mm |
Height | 2,137 |
Interior Color | White |
IP Rating | IP55 |
Material | Steel |
Material | Mild Steel |
Modification Services | Yes |
NEMA Rating | 12 |
NEMA Rating | 12 Indoor, dust-resistant |
Panel Included | No |
Protection Rating | NEMA Type 12 |
Size | 84.12x158.00x24.12 in |
Thickness | 3.04 mm |
Thickness | 11 ga |
Thickness | 51.40mm (2.024") |
Type | Mild Steel Freestanding Industrial Disconnect Enclosures |
Type Number | Type 12 |
Weight | 1,909 lb |
Width | 4,013 |
Width | 4,013 mm |
Width | 158 in |
With or Without Panel | Without |
Package Dimensions (L x W x H) | 168 IN x 32 IN x 92 IN |
Package Dimensions (L x W x H) | 426.72 cm x 81.28 cm x 233.68 cm |
Package Weight (Imperial) | 1909.000 L |
Package Weight (Metric) | 865.922 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What are the dimensions of the A84XM4EW24FTCLP?
The enclosure measures 84 inches high, 48 inches wide, and 24 inches deep (2134 mm x 1219 mm x 610 mm).
What is the weight of the A84XM4EW24FTCLP?
The enclosure weighs 614 lb (278 kg).
What is the NEMA rating of this enclosure?
The enclosure has a NEMA Type 3R rating for protection against falling rain, sleet, and dust.
What color is the interior and exterior of the enclosure?
The interior is white and the exterior is gray.
Does the enclosure include mounting hardware?
The enclosure includes collar studs for mounting inner panels, but the panel itself is not included.
What type of cover does the enclosure have?
The enclosure features a clamp cover with a three-point latching system and a gasketed seal.
Is the enclosure suitable for outdoor use?
Yes, the NEMA Type 3R rating makes it suitable for outdoor or exposed indoor applications.
How to Repaint a Hoffman Enclosure
Guide on preparing and repainting Hoffman enclosures with TGIC polyester powder coating.
Estimated time: 1h
Tools needed:
180 grit sandpaper, 220 or 240 grit sandpaper (optional), Solvent, Paint manufacturer's recommended tools
Supplies needed:
TGIC polyester powder coated Hoffman enclosure, Paint compatible with TGIC polyester powder coating, Primer (if recommended by paint manufacturer)
- Prepare the Surface
Thoroughly sand all enclosure surfaces with 180 grit sandpaper. If sanding marks are objectionable, finish sanding with 220 or 240 grit sandpaper. Wet wipe all surfaces with a solvent to remove any possible contaminants. Consult with your paint manufacturer for proper cure time and hardness prior to testing the paint for adhesion.
- Select Appropriate Paint
Choose a paint that exhibits good adhesion properties over polyester powder. Recommended types include two-component epoxies, some two-component polyurethanes, and alkyd baking enamels. If using alkyd finishes, do not bake at temperatures exceeding 150°F to avoid discoloration.
- Apply Paint
Apply two or three medium to light coats of paint. Allow two to three minutes flash off between coats. Allow paint to cure adequately according to the paint manufacturer's instructions.
- Test Adhesion
After the paint has cured adequately, test the paint for adhesion. Consult with your paint manufacturer for proper cure time and hardness prior to testing.
- Test Repainting Process
NOTICE: Always test the repainting process on an inconspicuous area prior to full application.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.