nVent A161410CHNF - Continuous Hinge Enclosure with Clamps Type 4, 16x14x10, Gray, Mild Steel
nVent

A161410CHNF

UPC: 783510292539

Documents & Media
Installation Instructions

Contact for Pricing

Overview

The nVent A161410CHNF Continuous Hinge Enclosure is a robust solution designed for superior environmental protection and operational security in demanding industrial settings. Constructed from durable mild steel and finished in a neutral gray, this enclosure offers exceptional resistance to dust, water, and other contaminants, making it ideal for both indoor and outdoor applications. Its substantial 16x14x10 inch dimensions provide ample space for housing sensitive electrical and electronic components, control systems, and instrumentation. The hallmark of this enclosure series is its continuous hinge design, which ensures a secure and consistent seal along the entire length of the door. This is further enhanced by three-sided stainless steel clamps, providing a tight, reliable closure that meets NEMA Type 4 standards. This rating signifies excellent protection against falling dirt, rain, sleet, snow, and splashing water, ensuring the integrity of internal equipment even in challenging weather conditions or washdown environments. The use of stainless steel for the clamps adds an extra layer of corrosion resistance, crucial for longevity in corrosive atmospheres. Engineered by nVent, a trusted leader in electrical enclosure solutions, the A161410CHNF benefits from decades of manufacturing expertise and a commitment to quality. Professionals rely on nVent enclosures for their dependable performance and ease of installation. This mild steel enclosure is a cost-effective yet highly effective choice for a wide array of industries, including: * **Manufacturing and Automation:** Protecting control panels, PLCs, and HMI systems on the factory floor. * **Water and Wastewater Treatment:** Safeguarding monitoring equipment and control systems in exposed environments. * **Food and Beverage Processing:** Ensuring hygiene and protection in washdown areas. * **Telecommunications:** Housing critical network equipment in outdoor cabinets. * **Energy Sector:** Protecting instrumentation and control devices in oil, gas, and power generation facilities. The continuous hinge allows for full, unobstructed access to the enclosure's interior when opened, simplifying installation, maintenance, and troubleshooting of the housed equipment. The robust mild steel construction offers inherent strength and durability, while the gray powder coat finish provides an additional layer of protection against corrosion and UV degradation. When selecting an enclosure, factors such as ingress protection (NEMA rating), material compatibility, size, and mounting requirements are paramount. The nVent A161410CHNF excels in providing a high level of protection (Type 4) in a versatile size, constructed from a reliable and cost-efficient material. For applications requiring enhanced security and environmental resilience, this nVent enclosure stands as a premier choice, offering peace of mind and safeguarding critical infrastructure.
  • Seams continuously welded and ground smooth
  • Stainless steel screw-down clamps on three sides of door
  • Continuous hinge
  • Stainless steel hinge pin
  • Oil-resistant gasket
  • Weldnuts provided for mounting optional panels and terminal block kits in size 6.00 x 4.00 in. (152 x 102 mm) and larger
  • Bonding provision on door
  • External wall-mounting brackets for easy installation
  • External wall-mounting brackets for easy installation

Specifications

Application
Controls and Drives
Color
Gray
Color Code
ANSI 61
Conductive Panel
A16P14G
Depth
13 IN
Depth
10 IN
Depth, Maximum
10
Depth, Minimum
10
Finish
Powder Coated
Height
44 IN
Height
16 in
IP Rating
IP66
Material
Steel
Material
Mild Steel
Modification Services
Yes
Mounting
16.75 x 12.00 in
Mounting
Wall Mounting Brackets Available
NEMA Rating
12
Nema Rating
Type 4
Overall Dimensions
114 x 88 mm
Overall Dimensions
17.50 x 14.94 in
Panel
A16P14
Panel Size
72.00 x 72.00 in
Panel Size
14.75 x 12.88 in
Protection Rating
NEMA Type 12
Series
Continuous Hinge Enclosure
Size
16.00x14.00x10.00 in
Size
16x14x10 inch
Thickness
14 ga
Thickness
51.40mm (2.024")
Type
Mild Steel Industrial Terminal and Junction Boxes
Type
Mild Steel Terminal and Junction Boxes
Type Number
Type 4
Weight
27 lb
Width
356 mm
Width
14 IN
Package Dimensions (L x W x H)
21 IN x 15 IN x 11.5 IN
Package Dimensions (L x W x H)
53.34 cm x 38.1 cm x 29.21 cm
Package Weight (Imperial)
27.000 L
Package Weight (Metric)
12.247 kg
Continuous Hinge Enclosure with Clamps Type 4, 16x14x8, Gray, Mild Steel

A16148CHNF

Continuous Hinge Enclosure with Clamps Type 4, 16x14x8, Gray, Mild Steel
The NEMA 4/4X/12 features a standard padlock-able feature with a single or (2) single point latches depending on the enclosure size. They are galvanealed steel coated. (Padlocks not included)

AB314

The NEMA 4/4X/12 features a standard padlock-able feature with a single or (2) single point latches depending on the enclosure size. They are galvanealed steel coated. (Padlocks not included)

How to Install the WS62XM6312SS Enclosure

This guide provides step-by-step instructions for mounting and wiring the WS62XM6312SS enclosure securely.

Estimated time: 1h

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Terminal connectors, Metal shims

  1. Mount the enclosure

    Secure the WS62XM6312SS enclosure to the wall or floor using proper fasteners in all mounting holes. Ensure the enclosure is level and firmly attached.

  2. Adjust door alignment

    If the enclosure is not level, place metal shims under the corners as needed to ensure the doors close evenly. Tighten all mounting screws securely.

  3. Install internal components

    Position the internal panel on the mounting studs and adjust any studs as necessary to fit the panel in place. Ensure all components are securely fastened.

  4. Connect electrical wiring

    Use terminal connectors to wire the internal components according to the manufacturer's specifications. Verify all connections with a multimeter to ensure proper functionality.

  5. Calibrate and test

    Once all components are installed and wired, power on the enclosure and perform a functionality test to ensure everything operates correctly.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.