Authorized Panduit Distributor
Panduit SBC2/0-Q - The SBC2/0-Q Mechanical Lug Split Bolt Copper is made from high strength copper alloy to provide premium electrical and mechanical performance for wide wire range-taking capability that helps minimize inventory requirements. The internal pressure bar provides a secure connection on a full range of conductor combinations used with each Lug assuring premium wire pull-out strength.

Panduit SBC2/0-Q The SBC2/0-Q Mechanical Lug Split Bolt Copper is made from high strength copper alloy to…

UPC: 074983627264

Documents & Media
Technical DrawingFull Engineering DrawingInstallation InstructionsVideo Clip

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The Panduit SBC2/0-Q Mechanical Lug Split Bolt Copper (SKU: SBC2/0-Q) is a high-strength copper alloy connector designed for reliable electrical and mechanical performance in industrial and utility applications. This split bolt accommodates copper conductors ranging from 2 AWG to 2/0 AWG, eliminating the need for multiple connector sizes and reducing inventory requirements. The extra-long body allows for the connection of one or two taps to a single run conductor, enhancing versatility in complex wiring scenarios. The internal pressure bar ensures a secure connection across all conductor combinations, providing exceptional wire pull-out strength and reliable electrical continuity. The hex nut is compatible with standard socket, box, or open-end wrenches, enabling proper torquing for consistent installations. With a voltage rating of 600V and a temperature rating of 90°C, the SBC2/0-Q is suitable for both indoor and outdoor applications, including direct burial grounding. The connector measures 1.72 inches (43.7 mm) in length and is supplied in a standard package quantity of 25 units. Ideal for electrical contractors, utilities, and industrial facilities, this split bolt delivers durable, high-performance wire termination solutions in harsh environments.
  • Accommodates copper conductors from 2 AWG to 2/0 AWG
  • Extra-long body allows connection of one or two taps to a single run conductor
  • Internal pressure bar ensures secure connection and premium wire pull-out strength
  • Hex nut compatible with standard socket, box, or open-end wrenches for proper torquing
  • UL/CSA certified for 600V and 90°C, including direct burial grounding

Specifications

Finish
blank
Material
Copper Alloy
Material
Copper
Material
Other
Standard
UL listed to 467 and 486 and CSA certified for use up to 600V & Temperature Rated to 90 C
Standard
UL listed to 467 and 486 and CSA certified for use up to 600V & Temperature Rated to 90°C
Type
Mechanical Split Bolt Connector
Voltage Rating
600 V
Package Dimensions (L x W x H)
7.7 IN x 3.4 IN x 3.45 IN
Package Weight (Imperial)
5.3 lbs
Cast Bronze Terminal Lug 500 - 300 MCM 4 Port 2 Mounting Holes Copper Terminal Lugs are made of high copper alloy. They are used for joining a wide range of cables or terminal blocks.

TL500-4L2

Cast Bronze Terminal Lug 500 - 300 MCM 4 Port 2 Mounting Holes Copper Terminal Lugs are made of high copper alloy. They are used for joining a wide range of cables or terminal blocks.
Copper Mechanical Lug with 5/16 Inch Bolt Hole, Wire Range 14-4 AWG, Green Slotted Screw, Tin Plated, 600 Volts, 100 Minimun

L70P-56GS

Copper Mechanical Lug with 5/16 Inch Bolt Hole, Wire Range 14-4 AWG, Green Slotted Screw, Tin Plated, 600 Volts, 100 Minimun
One-hole, copper, single barrel, offset floating tongue lug, #2 - 4/0 AWG, 5/16 (7.9mm) stud hole.

CB225-56-QY

One-hole, copper, single barrel, offset floating tongue lug, #2 - 4/0 AWG, 5/16 (7.9mm) stud hole.
AF26-38 STAR DELTA PUSHIN CONNECT SET

BEY38-4KF

AF26-38 STAR DELTA PUSHIN CONNECT SET
Split bolt, copper, type SBC, long body, #14 STR - #2 STR AWG.

SBC2L-C

Split bolt, copper, type SBC, long body, #14 STR - #2 STR AWG.
Split bolt, copper, type SBC, #1 STR - 3/0 STR AWG.

SBC3/0-Q

Split bolt, copper, type SBC, #1 STR - 3/0 STR AWG.
The SBC4S-C Mechanical Lug Split Bolt Copper is made from high strength copper alloy to provide premium electrical and mechanical performance for wide wire range-taking capability that helps minimize inventory requirements. The internal pressure bar provides a secure connection on a full range of conductor combinations used with each Lug assuring premium wire pull-out strength.

SBC4S-C

The SBC4S-C Mechanical Lug Split Bolt Copper is made from high strength copper alloy to provide premium electrical and mechanical performance for wide wire range-taking capability that helps minimize inventory requirements. The internal pressure bar provides a secure connection on a full range of conductor combinations used with each Lug assuring premium wire pull-out strength.
The SBC2-C Mechanical Lug Split Bolt Copper is made from high strength copper alloy to provide premium electrical and mechanical performance for wide wire range-taking capability that helps minimize inventory requirements. The internal pressure bar provides a secure connection on a full range of conductor combinations used with each Lug assuring premium wire pull-out strength.

SBC2-C

The SBC2-C Mechanical Lug Split Bolt Copper is made from high strength copper alloy to provide premium electrical and mechanical performance for wide wire range-taking capability that helps minimize inventory requirements. The internal pressure bar provides a secure connection on a full range of conductor combinations used with each Lug assuring premium wire pull-out strength.

How to Install the SBC2/0-Q Split Bolt Connector

Instructions for installing Panduit Split Bolt Connectors (SBC) for electrical connections.

Estimated time: 15m

Tools needed:

Torque wrench, Wire strippers, Pliers

Supplies needed:

Copper conductors, Aluminum conductors (if applicable)

  1. Prepare the Conductors

    Strip the ends of the copper and/or aluminum conductors according to the specifications in the provided table. Ensure the stripped length is appropriate for the connector size.

  2. Insert Conductors into Connector

    Insert one conductor into the 'run' side of the split bolt connector and the other conductor into the 'tap' side. Ensure the conductors are fully seated within the connector.

  3. Tighten the Connector

    Using a torque wrench, tighten the set screw of the split bolt connector to the required torque value specified in the table for the particular part number and conductor type. Refer to the nameplate or datasheet for specific torque values if they vary.

  4. Verify Connection

    Visually inspect the connection to ensure it is secure and that the conductors are properly aligned. For critical applications, use a multimeter to verify electrical continuity.

Frequently Asked Questions about Panduit

What environmental ratings do Panduit products have?

Panduit products feature comprehensive environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13; CSA Type 1, 2, 3, 4, 4X, 12, and 13; and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They meet IEC 60529 IP66 rating, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments, with operating temperatures ranging from -40°C to 130°C.

What certifications and standards do Panduit products comply with?

Panduit products are certified to multiple critical industry standards, including UL (Underwriters Laboratories) in the USA and Canada, CSA (Canadian Standard Association), EN IEC 61386, LVD 2006/G5/EC, and ARRA standards. Our products meet rigorous certifications for electrical safety, environmental compliance (WEEE and RoHS), and are designed to perform in extreme temperatures ranging from -55°C to 105°C, making them suitable for demanding industrial environments.

What industries and applications are Panduit products used for?

Panduit products are engineered for critical applications across multiple industries, including commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety-critical environments. Their solutions span electrical infrastructure, wire management, cable ties, power connectors, and safety systems designed to withstand extreme conditions like high vibration, temperature variations, UV exposure, and corrosive agents. Key industries include solar and wind energy, aerospace, heavy trucking, military, commercial transportation, and industrial manufacturing.

What are the main product lines offered by Panduit?

Panduit offers a comprehensive range of electrical infrastructure products including power connectors, cable ties, grounding connectors, identification products, safety solutions, terminals, cable cleats, wiring duct, and cable tie accessories. These products are engineered for industrial environments across multiple sectors like commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications.

What are the key features of Panduit products?

Panduit products are engineered for robust performance in heavy-duty industrial environments, featuring a comprehensive range of solutions including cable ties, power connectors, terminals, and identification products. Key features include proven quality performance, subject matter expertise, and customer-driven innovation across multiple industrial sectors such as commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications. The product line is designed to maximize productivity, reliability, and safety while meeting stringent industry standards.

What is Panduit's warranty policy?

Panduit provides a comprehensive Limited Product Warranty that can be fully reviewed on their official website at www.panduit.com/warranty. All Panduit products are subject to the terms, conditions, and limitations of this current warranty. Customers are advised to review the specific warranty details for their particular product, as Panduit requires buyers to determine product suitability for their intended use and assumes all associated risks.

What technical support does Panduit offer?

Panduit offers comprehensive technical support through their dedicated customer service team, accessible via phone at 1-800-777-3300. They provide expert assistance for their full range of industrial infrastructure products, including cable ties, power connectors, terminals, and identification solutions. Customers can also access additional technical resources and product information through their website at www.panduit.com.

What accessories are available for Panduit products?

Panduit offers a wide range of accessories across multiple product lines, including cable ties, cable tie accessories, cable tie tools, identification products, cable cleats, grounding connectors, and VeriSafe accessories like the VeriSafe Network Module and Insulation Piercing Connectors. For a comprehensive view of all available accessories, customers are recommended to visit www.panduit.com for the full product catalog.

How are Panduit products typically installed?

Panduit products are engineered for comprehensive installation across industrial environments, utilizing specialized tools and techniques for precise mounting. Installation methods vary by product line - from cable ties and power connectors to terminals and identification solutions - but all are designed for robust performance in heavy-duty settings. Technicians typically use Panduit's dedicated installation tools and follow manufacturer guidelines available at www.panduit.com to ensure proper fitting and maximum infrastructure reliability.