Contact for Pricing
Minimum Qty: 18
Multiplier: 18
*Contact for lower quantities*
Overview
- 26 AWG solid copper conductors with HDPE insulation for low attenuation
- Supports 10GBASE-T Ethernet up to 100 meters
- LSZH jacket for safety in plenum/riser spaces, low smoke emission
- Cross divider between pairs reduces crosstalk for signal integrity
- Packaged on 1000ft/305m reel for structured cabling installations
Specifications
Application | Indoor |
Color | White |
Conductor Material | Copper |
Construction | U/UTP |
Length | 1000 |
Number of Conductors | 4 |
Outside Diameter | NA In. |
Temperature Rating | NA F |
Type | Copper Cable |
Type | Bulk Copper Cable |
Voltage Rating | NA V |
Voltage Rating | NA V V |
Package Dimensions (L x W x H) | 12.6 IN x 12.6 IN x 12.2 IN |
Package Weight (Imperial) | 31.5 lbs |
PFC6X04WH-CEG
The TX6A Cat 6A F/UTP CM copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs, separated by a cross divider and covered by an overall metallic shield and a PVC flame retardant, White jacket. Packaged 1000ft/305m on a reel
BTC0614
Type BTC - Copper Single-Conductor, One-Hole Mount (Offset-Tang), Conductor Range 6 Str-14 AWG, Length 1-9/64, Width 3/8 Inch, Height 11/16 Inch, 13/64 Bolt Inch HoleFrequently Asked Questions
Is the cable compatible with PoE applications?
Yes, it meets IEEE 802.3af, IEEE 802.3at, and IEEE 802.3bt for PoE applications.
What is the maximum operating voltage?
The maximum operating voltage for the cable is 80V.
What is the temperature range for operation?
The cable operates between -20°C to 75°C (-4°F to 167°F).
What is the installation temperature rating?
The installation temperature rating is 0°C to 60°C (32°F to 140°F).
What is the maximum installation tension?
The maximum installation tension is 25 lbf (110 N).
What is the cable diameter?
The nominal cable diameter is 0.240 in (6.1mm).
What is the flame rating for FEP Plenum?
The flame rating for FEP Plenum (CMP) is NFPA 262.
What materials are used for insulation?
The cable uses FEP, flame retardant PVC, and HDPE for insulation.
What is the DC resistance per 328 ft?
The DC resistance is less than 9.38 Ohm per 328 ft. (100m).
What applications is this cable suitable for?
It is suitable for 10GBASE-T Ethernet, data center I/O consolidation, and high-speed computing.
How to Install the TX6A™ and TX6A-SD™ 10Gig™ UTP Copper Cabling System
This guide provides step-by-step instructions for installing the TX6A™ and TX6A-SD™ 10Gig™ UTP Copper Cabling System in compliance with industry standards.
Estimated time: 1h
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Cable ties, Terminal connectors
- Plan the cable pathways
Design the cable pathways to minimize disruption and allow for future expansion, ensuring the maximum fill capacity does not exceed 40% for initial installation.
- Mount the cables
Securely mount the TX6A™ or TX6A-SD™ cables in the designated pathways, ensuring that the bend radius is maintained at a minimum of four times the cable diameter.
- Terminate the cables
Follow the termination procedures at the patch panel, ensuring that the outer cable jacket is as close as possible to the point of termination and that the last twist is no further than 0.5 inches from the termination point.
- Verify cable connections
Use a multimeter to verify that all connections are secure and that there are no shorts or open circuits in the installed cables.
- Organize and secure cables
Use cable ties to bundle and secure the cables, ensuring that they are not pinched or crushed and that there is at least 12 inches of slack at the work area.
Frequently Asked Questions about Panduit
What environmental ratings do Panduit products have?
Panduit products feature comprehensive environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13; CSA Type 1, 2, 3, 4, 4X, 12, and 13; and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They meet IEC 60529 IP66 rating, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments, with operating temperatures ranging from -40°C to 130°C.
What certifications and standards do Panduit products comply with?
Panduit products are certified to multiple critical industry standards, including UL (Underwriters Laboratories) in the USA and Canada, CSA (Canadian Standard Association), EN IEC 61386, LVD 2006/G5/EC, and ARRA standards. Our products meet rigorous certifications for electrical safety, environmental compliance (WEEE and RoHS), and are designed to perform in extreme temperatures ranging from -55°C to 105°C, making them suitable for demanding industrial environments.
What industries and applications are Panduit products used for?
Panduit products are engineered for critical applications across multiple industries, including commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety-critical environments. Their solutions span electrical infrastructure, wire management, cable ties, power connectors, and safety systems designed to withstand extreme conditions like high vibration, temperature variations, UV exposure, and corrosive agents. Key industries include solar and wind energy, aerospace, heavy trucking, military, commercial transportation, and industrial manufacturing.
What are the main product lines offered by Panduit?
Panduit offers a comprehensive range of electrical infrastructure products including power connectors, cable ties, grounding connectors, identification products, safety solutions, terminals, cable cleats, wiring duct, and cable tie accessories. These products are engineered for industrial environments across multiple sectors like commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications.
What are the key features of Panduit products?
Panduit products are engineered for robust performance in heavy-duty industrial environments, featuring a comprehensive range of solutions including cable ties, power connectors, terminals, and identification products. Key features include proven quality performance, subject matter expertise, and customer-driven innovation across multiple industrial sectors such as commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications. The product line is designed to maximize productivity, reliability, and safety while meeting stringent industry standards.
What is Panduit's warranty policy?
Panduit provides a comprehensive Limited Product Warranty that can be fully reviewed on their official website at www.panduit.com/warranty. All Panduit products are subject to the terms, conditions, and limitations of this current warranty. Customers are advised to review the specific warranty details for their particular product, as Panduit requires buyers to determine product suitability for their intended use and assumes all associated risks.
What technical support does Panduit offer?
Panduit offers comprehensive technical support through their dedicated customer service team, accessible via phone at 1-800-777-3300. They provide expert assistance for their full range of industrial infrastructure products, including cable ties, power connectors, terminals, and identification solutions. Customers can also access additional technical resources and product information through their website at www.panduit.com.
What accessories are available for Panduit products?
Panduit offers a wide range of accessories across multiple product lines, including cable ties, cable tie accessories, cable tie tools, identification products, cable cleats, grounding connectors, and VeriSafe accessories like the VeriSafe Network Module and Insulation Piercing Connectors. For a comprehensive view of all available accessories, customers are recommended to visit www.panduit.com for the full product catalog.
How are Panduit products typically installed?
Panduit products are engineered for comprehensive installation across industrial environments, utilizing specialized tools and techniques for precise mounting. Installation methods vary by product line - from cable ties and power connectors to terminals and identification solutions - but all are designed for robust performance in heavy-duty settings. Technicians typically use Panduit's dedicated installation tools and follow manufacturer guidelines available at www.panduit.com to ensure proper fitting and maximum infrastructure reliability.