Authorized Panduit Distributor
Panduit LCC2-14DWF-Q - Two-hole, long barrel lug with window, #2 AWG wire, 1/4 stud holes, 1 hole spacing, 90 angle tongue.
Panduit

LCC2-14DWF-Q

UPC: 074983805969

Documents & Media
Technical BulletinTechnical DrawingFull Engineering DrawingInstallation InstructionsVideo Clip

Contact for Pricing

Minimum Qty: 25

Multiplier: 1

*Contact for lower quantities*

Overview

The Panduit LCC2-14DWF-Q is a two-hole, long barrel lug with a window, specifically engineered for robust and reliable wire terminations. This lug is constructed from high-conductivity copper, ensuring excellent electrical performance. It is designed to accommodate #2 AWG wire, a common gauge for various electrical applications. The LCC2-14DWF-Q features two 1/4" stud holes, providing secure mounting points for connecting to electrical studs or busbars. The spacing between these two holes is 1 inch, which is a critical dimension for ensuring proper fit and alignment within electrical enclosures and panels. The tongue of the lug is oriented at a 90° angle, a design feature that facilitates installation in tight spaces or specific panel configurations where a right-angle connection is required. The long barrel design is a key attribute, offering a greater surface area for crimping and thus a more secure and mechanically strong connection to the wire. Furthermore, the integrated window in the barrel allows for visual verification of wire insertion, confirming that the conductor is fully seated within the barrel before crimping. This visual inspection capability is crucial for preventing improper terminations and ensuring the long-term integrity of the electrical connection. The two-hole configuration, combined with the specified hole spacing, contributes to enhanced mechanical stability of the termination, helping to mitigate issues related to vibration and movement in demanding environments. This lug is an integral component for power distribution panels, control cabinets, and the wiring of machinery, where dependable high-current connections are paramount. The LCC2-14DWF-Q is part of Panduit's LCC series, adhering to established industrial standards for both electrical conductivity and mechanical strength. Its classification under UNSPSC code 39121405 as a terminal lug further validates its intended use within electrical wiring systems. Manufactured in the USA, the LCC2-14DWF-Q is built to deliver consistent and reliable performance in a wide range of demanding industrial applications.
  • Two-hole design with window for secure #2 AWG wire termination
  • 1/4" stud holes for compatibility with standard fasteners
  • 90° angle tongue mounting for panel compatibility
  • Long barrel design for enhanced mechanical stability
  • Copper construction for high conductivity and durability

Specifications

Angle*
90
Angle*
90°
Barrel Type*
Long
Color
Brown
Material
Tin-plated Copper
Mounting
1-1/4 In.
Number Of Holes
2
Size
#2 AWG Code
Special Features
Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 V
Standard
CSA certified C22.2 No. 65-13, UL Listed to 486A-486B File #E52164, ABS approved, NEBS Level 3
Stud Size
1/4 In.
Type
Compression Lug
Package Dimensions (L x W x H)
5.7 IN x 3.3 IN x 3.3 IN
Package Weight (Imperial)
1.75 lbs
Mechanical Crimp Tool with 5/8 Inch Nose Die APPLICATIONS: Designed for use with wide range and H-Tap connectors. It has fiberglass handles and comes with "O" and "D" Nose Dies. It has an output of 4.5 tons.

OD581

Mechanical Crimp Tool with 5/8 Inch Nose Die APPLICATIONS: Designed for use with wide range and H-Tap connectors. It has fiberglass handles and comes with "O" and "D" Nose Dies. It has an output of 4.5 tons.
O' Die for OD581 Mechanical Crimp Tool

OJB

O' Die for OD581 Mechanical Crimp Tool
U-Type Compression Die - Pink 1/0 AWG Copper - 2 AWG Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.

CD6A

U-Type Compression Die - Pink 1/0 AWG Copper - 2 AWG Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.
U-Type Compression Die - Black 2/0 AWG Copper U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.

CD7

U-Type Compression Die - Black 2/0 AWG Copper U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.
Non-Insulated Parallel Splice Connector For Wire Range 6 For Circular Mil Range 20,800-33,100 Length .5 Diameter .365,Metallic

E6-PS-D

Non-Insulated Parallel Splice Connector For Wire Range 6 For Circular Mil Range 20,800-33,100 Length .5 Diameter .365,Metallic
Power Distribution Block (1) 2/0-14 AWG Primary (6) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.

AS-K1-H6

Power Distribution Block (1) 2/0-14 AWG Primary (6) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.
PVC Coated Junction Box, 12 Inch X 12 Inch X 6 Inch, 14 Gauge, Gray

A1212SC-G

PVC Coated Junction Box, 12 Inch X 12 Inch X 6 Inch, 14 Gauge, Gray
Molded Junction Box, Length 4 Inch x Width 4 Inch x Depth 2 Inch, Material Polycarbonate, Color Gray

E989NNJ-5-HD

Molded Junction Box, Length 4 Inch x Width 4 Inch x Depth 2 Inch, Material Polycarbonate, Color Gray
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

1SNK705010R0000

Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

1SNK705030R0000

Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

How to Install Copper Compression Connectors

This guide provides step-by-step instructions for installing copper compression connectors, ensuring secure and reliable electrical connections.

Estimated time: 30m

Tools needed:

Wire strippers, Crimping tool, Heat gun or propane torch

Supplies needed:

Copper compression connectors, Heat shrink tubing

  1. Select the correct connector

    Choose a connector that matches the wire size and material. Do not use copper connectors on aluminum wire.

  2. Prepare the wire

    Strip the wire insulation to the length specified in the tool chart without damaging the conductor strands. Clean the wire to ensure a good connection.

  3. Insert and crimp the connector

    Insert the stripped wire into the connector until it stops. Use the crimping tool to crimp the connector, following the markings for proper spacing. Ensure to crimp near the tongue end and move towards the wire end.

  4. Inspect the crimp

    After crimping, inspect the connection for any sharp edges, flash, or burrs and remove them if present.

  5. Apply heat shrink insulation

    Cut the heat shrink tubing to the desired length, allowing for a minimum of 1.5 inches of overlap on the wire insulation. Use a heat gun or propane torch to shrink the tubing, moving from the crimped portion towards the insulated wire until adhesive flow indicates completion.

Frequently Asked Questions about Panduit

What environmental ratings do Panduit products have?

Panduit products feature comprehensive environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13; CSA Type 1, 2, 3, 4, 4X, 12, and 13; and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They meet IEC 60529 IP66 rating, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments, with operating temperatures ranging from -40°C to 130°C.

What certifications and standards do Panduit products comply with?

Panduit products are certified to multiple critical industry standards, including UL (Underwriters Laboratories) in the USA and Canada, CSA (Canadian Standard Association), EN IEC 61386, LVD 2006/G5/EC, and ARRA standards. Our products meet rigorous certifications for electrical safety, environmental compliance (WEEE and RoHS), and are designed to perform in extreme temperatures ranging from -55°C to 105°C, making them suitable for demanding industrial environments.

What industries and applications are Panduit products used for?

Panduit products are engineered for critical applications across multiple industries, including commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety-critical environments. Their solutions span electrical infrastructure, wire management, cable ties, power connectors, and safety systems designed to withstand extreme conditions like high vibration, temperature variations, UV exposure, and corrosive agents. Key industries include solar and wind energy, aerospace, heavy trucking, military, commercial transportation, and industrial manufacturing.

What are the main product lines offered by Panduit?

Panduit offers a comprehensive range of electrical infrastructure products including power connectors, cable ties, grounding connectors, identification products, safety solutions, terminals, cable cleats, wiring duct, and cable tie accessories. These products are engineered for industrial environments across multiple sectors like commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications.

What are the key features of Panduit products?

Panduit products are engineered for robust performance in heavy-duty industrial environments, featuring a comprehensive range of solutions including cable ties, power connectors, terminals, and identification products. Key features include proven quality performance, subject matter expertise, and customer-driven innovation across multiple industrial sectors such as commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications. The product line is designed to maximize productivity, reliability, and safety while meeting stringent industry standards.

What is Panduit's warranty policy?

Panduit provides a comprehensive Limited Product Warranty that can be fully reviewed on their official website at www.panduit.com/warranty. All Panduit products are subject to the terms, conditions, and limitations of this current warranty. Customers are advised to review the specific warranty details for their particular product, as Panduit requires buyers to determine product suitability for their intended use and assumes all associated risks.

What technical support does Panduit offer?

Panduit offers comprehensive technical support through their dedicated customer service team, accessible via phone at 1-800-777-3300. They provide expert assistance for their full range of industrial infrastructure products, including cable ties, power connectors, terminals, and identification solutions. Customers can also access additional technical resources and product information through their website at www.panduit.com.

What accessories are available for Panduit products?

Panduit offers a wide range of accessories across multiple product lines, including cable ties, cable tie accessories, cable tie tools, identification products, cable cleats, grounding connectors, and VeriSafe accessories like the VeriSafe Network Module and Insulation Piercing Connectors. For a comprehensive view of all available accessories, customers are recommended to visit www.panduit.com for the full product catalog.

How are Panduit products typically installed?

Panduit products are engineered for comprehensive installation across industrial environments, utilizing specialized tools and techniques for precise mounting. Installation methods vary by product line - from cable ties and power connectors to terminals and identification solutions - but all are designed for robust performance in heavy-duty settings. Technicians typically use Panduit's dedicated installation tools and follow manufacturer guidelines available at www.panduit.com to ensure proper fitting and maximum infrastructure reliability.