Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Overview
- Thick wall polyolefin heat shrink tubing with adhesive lining for superior sealing.
- 0.4" (10.2mm) expanded ID, 0.16" (4.1mm) recovered ID, 3" (76.2mm) length.
- 3:1 shrink ratio, flame retardant (UL 224 VW-1), rated for 600V @ 90°C (UL 486D).
- Suitable for direct burial and wet locations; meets Mil Spec AMS-DTL-23053/15.
- Operating temperature range: -67°F to 230°F (-55°C to 110°C); 10-year shelf life.
Specifications
Color | Red |
Continuous Operating Temperature | 230 F |
Flammability | Flame Retardant |
Inside Diameter | 0.16 In. |
Material | Cross-Linked Polyolefin |
Minimum Shrink Temperature | 248 F |
Outside Diameter | 0.4 In. |
Series | HST0.4 |
Shrink Ratio | 3:1 |
Size | 0.4" (10.2mm) diameter, 3.0" (76.2mm) length |
Thickness | 0.08 In. |
Type | Heat Shrink |
Package Dimensions (L x W x H) | 8.6 IN x 8.1 IN x 5.7 IN |
Package Weight (Imperial) | 1.03 lbs |
HST0.4-48-5-2Y
Thick wall adhesive lined, .4" (10.2mm) diameter, 48.0" (1219.2mm) length, adhesive lined red cross-linked polyolefin, 5 pc. package quantity.
CPO500-2-B
Thin-Wall Heat Shrinkable Tubing, Red Cross-Linked Polyolefin, 1/2 Inch, Shrink Ratio 2:1, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined, Bulk
Frequently Asked Questions
What is the maximum operating temperature?
The maximum operating temperature is 230°F (110°C).
Is the tubing suitable for outdoor use?
Yes, it is approved for outdoor, direct sunlight applications.
Can this tubing be used for direct burial?
Yes, it is suitable for direct burial applications according to UL 486D.
What is the voltage rating of the product?
The product is rated for 600V continuous use according to UL 486D.
What is the shrink temperature required?
The minimum recommended shrink temperature is 248°F (120°C).
What materials are used in this heat shrink tubing?
It is made of irradiated cross-linked polyolefin with an inner wall of hot melt adhesive.
What is the flammability rating of the tubing?
The tubing meets UL 224 VW-1 flame retardant standards.
How should the tubing be installed?
A broad soft flame torch or hot air gun should be used to shrink the tube.
What is the shelf life of the product?
The shelf life of the product is 10 years.
What is the water absorption rate?
The water absorption rate is 0.5% maximum per ASTM D570.
How to Install HST3.0-48-2 Heat Shrink Tubing
This guide provides step-by-step instructions for installing HST3.0-48-2 heat shrink tubing for effective cable insulation and protection.
Estimated time: 30m
Tools needed:
Screwdriver, Wire strippers, Heat source (torch or hot air gun), Multimeter
Supplies needed:
HST3.0-48-2 heat shrink tubing, In-line splice connectors, Lug connectors, Cable
- Calculate minimum tube length
Determine the total minimum tube length by calculating the overlap length (minimum 2 inches) and adding the splice length from the manufacturer.
- Prepare the cable
Clean the cable surface lightly by sanding and remove the insulation according to the connector manufacturer's instructions.
- Install the connectors
Place the tube over the cable, install the connectors as per the manufacturer's instructions, and preheat the cable insulation where it will contact the tube.
- Shrink the tubing
Using a broad soft flame, start shrinking the tube from the center towards the ends, ensuring to keep the heat source moving to avoid scorching.
- Verify installation
Check that the adhesive oozes from between the tube and the cable or lug, indicating that the shrink process is complete.
Frequently Asked Questions about Panduit
What environmental ratings do Panduit products have?
Panduit products feature comprehensive environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13; CSA Type 1, 2, 3, 4, 4X, 12, and 13; and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They meet IEC 60529 IP66 rating, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments, with operating temperatures ranging from -40°C to 130°C.
What certifications and standards do Panduit products comply with?
Panduit products are certified to multiple critical industry standards, including UL (Underwriters Laboratories) in the USA and Canada, CSA (Canadian Standard Association), EN IEC 61386, LVD 2006/G5/EC, and ARRA standards. Our products meet rigorous certifications for electrical safety, environmental compliance (WEEE and RoHS), and are designed to perform in extreme temperatures ranging from -55°C to 105°C, making them suitable for demanding industrial environments.
What industries and applications are Panduit products used for?
Panduit products are engineered for critical applications across multiple industries, including commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety-critical environments. Their solutions span electrical infrastructure, wire management, cable ties, power connectors, and safety systems designed to withstand extreme conditions like high vibration, temperature variations, UV exposure, and corrosive agents. Key industries include solar and wind energy, aerospace, heavy trucking, military, commercial transportation, and industrial manufacturing.
What are the main product lines offered by Panduit?
Panduit offers a comprehensive range of electrical infrastructure products including power connectors, cable ties, grounding connectors, identification products, safety solutions, terminals, cable cleats, wiring duct, and cable tie accessories. These products are engineered for industrial environments across multiple sectors like commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications.
What are the key features of Panduit products?
Panduit products are engineered for robust performance in heavy-duty industrial environments, featuring a comprehensive range of solutions including cable ties, power connectors, terminals, and identification products. Key features include proven quality performance, subject matter expertise, and customer-driven innovation across multiple industrial sectors such as commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications. The product line is designed to maximize productivity, reliability, and safety while meeting stringent industry standards.
What is Panduit's warranty policy?
Panduit provides a comprehensive Limited Product Warranty that can be fully reviewed on their official website at www.panduit.com/warranty. All Panduit products are subject to the terms, conditions, and limitations of this current warranty. Customers are advised to review the specific warranty details for their particular product, as Panduit requires buyers to determine product suitability for their intended use and assumes all associated risks.
What technical support does Panduit offer?
Panduit offers comprehensive technical support through their dedicated customer service team, accessible via phone at 1-800-777-3300. They provide expert assistance for their full range of industrial infrastructure products, including cable ties, power connectors, terminals, and identification solutions. Customers can also access additional technical resources and product information through their website at www.panduit.com.
What accessories are available for Panduit products?
Panduit offers a wide range of accessories across multiple product lines, including cable ties, cable tie accessories, cable tie tools, identification products, cable cleats, grounding connectors, and VeriSafe accessories like the VeriSafe Network Module and Insulation Piercing Connectors. For a comprehensive view of all available accessories, customers are recommended to visit www.panduit.com for the full product catalog.
How are Panduit products typically installed?
Panduit products are engineered for comprehensive installation across industrial environments, utilizing specialized tools and techniques for precise mounting. Installation methods vary by product line - from cable ties and power connectors to terminals and identification solutions - but all are designed for robust performance in heavy-duty settings. Technicians typically use Panduit's dedicated installation tools and follow manufacturer guidelines available at www.panduit.com to ensure proper fitting and maximum infrastructure reliability.