Authorized Panduit Distributor
Panduit FZTRP5N5NANF079 - OM4 12 fiber, interconnect cable assembly, plenum (OFNP) rated, MPO female to MPO female, Method A Std IL, with no pulling eye 79 ft
Panduit

FZTRP5N5NANF079

UPC: 074983916788

Documents & Media
Technical DrawingFull Engineering DrawingInstallation InstructionsSpecification Sheet

Contact for Pricing

Overview

The Panduit FZTRP5N5NANF079 is a 79-foot OM4 12-fiber interconnect cable assembly designed for high-density fiber optic networks in plenum spaces. Both ends terminate in female MPO connectors, enabling quick, reliable multi-fiber connections in data centers, enterprise networks, and telecommunications infrastructure. Key specifications include a 3.0mm round indoor cable with LSZH (Low Smoke Zero Halogen) jacket, optimized for plenum-rated applications. The OM4 50/125μm multimode fiber supports high-bandwidth applications with maximum attenuation of 3.5dB/km at 850nm and 1.5dB/km at 1300nm. Connector insertion loss is rated at 0.50dB maximum, ensuring minimal signal degradation. The assembly adheres to Method A Standard IL (Insertion Loss) polarity, guaranteeing consistent performance in structured cabling systems. Physical durability is reinforced with a minimum bend radius of 20x cable OD under load and 10x OD static, tensile strength of 220N, and compressive load resistance of 35N/cm. The cable withstands 25 flex cycles and 10 twist cycles, with connector durability rated at 500 mating cycles. Operating temperature range spans 0°C to 70°C, while storage/shipping temperatures extend from -40°C to 70°C. Installation is supported within 0°C to 40°C. This cable assembly is ideal for high-density fiber deployments where space efficiency and signal integrity are critical. Its plenum-rated construction eliminates the need for conduit in air-handling spaces, reducing installation complexity. The absence of a pulling eye indicates it is designed for direct installation or integration into existing pathways where tension management is handled externally. Trust Panduit’s QuickNet™ series for dependable, pre-terminated fiber solutions in mission-critical network environments.
  • 12-fiber OM4 multimode (50/125μm) plenum-rated cable with LSZH jacket
  • OFNP-rated for safe installation in air-handling spaces (TIA/EIA-568-C.3 compliant)
  • MPO female connectors on both ends, Method A Standard IL polarity
  • 3.0mm OD, 79ft length, 0.50dB max insertion loss, 3.5dB/km attenuation at 850nm
  • Operating temp: 0°C to 70°C; Storage/shipping: -40°C to 70°C

Specifications

Application
OM4
Color
Aqua
Connection Type
MPO Female to MPO Female
Connector 1 Type*
MPO Female
Connector 2 Type*
MPO Female
Fiber Compatibility*
OM4 50/125um
Fiber Count*
12
Ip Rating
OFNP
Length
79 FT
Material
Plenum
Poles
12 fiber
Poles
12
Series
FZTRP5N5NANF079
Series
OM4 12 fiber
Size
79 ft
Special Features
Indoor
Standard
Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5 (FOCIS-5), TIA/EIA-568-C.1 RoHS Compliant
Temperature Rating
158 F
Type
Interconnect Cable Assembly
Package Dimensions (L x W x H)
14 IN x 17 IN x 1.5 IN
Package Weight (Imperial)
0.76 lbs
OM4 24 fiber, Interconnect, Plenum, 24F MPO Female to 24F MPO Female, Method B, Optimized IL, 27 ft, Aqua

FZURPENENYNF027

OM4 24 fiber, Interconnect, Plenum, 24F MPO Female to 24F MPO Female, Method B, Optimized IL, 27 ft, Aqua
OM4 12 fiber, PanMPO interconnect cable assembly, plenum rated (OFNP), PanMPO Female To PanMPO Female, Method A, Std IL with no pulling eye, Aqua, 64 ft

FZTRP7N7NANF064

OM4 12 fiber, PanMPO interconnect cable assembly, plenum rated (OFNP), PanMPO Female To PanMPO Female, Method A, Std IL with no pulling eye, Aqua, 64 ft
OM3 12 fiber, PanMPO interconnect cable assembly, plenum rated (OFNP), PanMPO Female To PanMPO Female, Method A, Std IL with no pulling eye, Aqua, 36 ft

FXTRP7N7NANF036

OM3 12 fiber, PanMPO interconnect cable assembly, plenum rated (OFNP), PanMPO Female To PanMPO Female, Method A, Std IL with no pulling eye, Aqua, 36 ft
OM3 12 fiber, PanMPO interconnect cable assembly, plenum rated (OFNP), PanMPO Female To PanMPO Female, Method A, Std IL with no pulling eye, Aqua, 29 ft

FXTRP7N7NANF029

OM3 12 fiber, PanMPO interconnect cable assembly, plenum rated (OFNP), PanMPO Female To PanMPO Female, Method A, Std IL with no pulling eye, Aqua, 29 ft
OM3 12 fiber, PanMPO interconnect cable assembly, plenum rated (OFNP), PanMPO Female To PanMPO Female, Method A, Std IL with no pulling eye, Aqua, 37 ft

FXTRP7N7NANF037

OM3 12 fiber, PanMPO interconnect cable assembly, plenum rated (OFNP), PanMPO Female To PanMPO Female, Method A, Std IL with no pulling eye, Aqua, 37 ft
OM4 12 fiber, interconnect cable assembly, plenum (OFNP) rated, MPO female to MPO female, Method A Std IL, with no pulling eye 65 ft

FZTRP5N5NANF065

OM4 12 fiber, interconnect cable assembly, plenum (OFNP) rated, MPO female to MPO female, Method A Std IL, with no pulling eye 65 ft
OM4 12 fiber, interconnect cable assembly, plenum (OFNP) rated, MPO female to MPO female, Method A Std IL, with no pulling eye 103 ft

FZTRP5N5NANF103

OM4 12 fiber, interconnect cable assembly, plenum (OFNP) rated, MPO female to MPO female, Method A Std IL, with no pulling eye 103 ft
OM4 12 fiber, interconnect cable assembly, plenum (OFNP) rated, MPO female to MPO female, Method A Std IL, with no pulling eye 93 ft

FZTRP5N5NANF093

OM4 12 fiber, interconnect cable assembly, plenum (OFNP) rated, MPO female to MPO female, Method A Std IL, with no pulling eye 93 ft

Frequently Asked Questions

What are the cable jacket ratings?

The cable jacket ratings include Optical Fiber Nonconductive Plenum (OFNP) and Low Smoke Zero Halogen (LSZH).

Is this product RoHS compliant?

Yes, the product is RoHS compliant.

What types of fiber are available for this product?

The product supports Singlemode (OS1/OS2 9/125μm) and Multimode (OM3 50/125μm, OM4 50/125μm) fiber types.

What is the operating temperature range for this cable?

The operating temperature range for this cable is 0°C to 70°C.

How many mating cycles can the connectors endure?

The connectors can endure up to 500 mating cycles.

What is the tensile strength of the cable?

The cable tensile strength is rated at 220N.

What connector types are available for this product?

The product is available with MPO Female or MPO Male connectors at both ends.

What is the maximum cable attenuation for Singlemode fiber?

The maximum cable attenuation for Singlemode fiber is 1.0dB/km at 1310/1550nm.

What is the installation temperature requirement?

The installation temperature requirement is between 0°C to 40°C.

What is the minimum bend radius for this cable?

The minimum bend radius is 20 times the cable diameter under load and 10 times the cable diameter when static.

How to Clean and Inspect Fiber Optic Connectors

This guide provides step-by-step instructions for cleaning and inspecting fiber optic connectors to ensure optimal performance and reliability.

Estimated time: 1h

Tools needed:

Fiber Inspection Microscope, Cleaning Swabs, Multimeter

Supplies needed:

Isopropyl Alcohol, Non-woven cloth wipes, Dust caps

  1. Inspect the connector

    Ensure no power is present. Remove any protective caps and inspect the connector end faces using a 200x magnification fiber inspection device.

  2. Clean the connector

    If the end face appears dirty, use a micro fabric-based dry cleaner to clean the fiber. Re-inspect the end face to ensure cleanliness.

  3. Perform wet cleaning if necessary

    If dirt remains after dry cleaning, apply 90+% Isopropyl Alcohol to a cleaning swab and rub over the connector end face. Dry immediately with a dry cleaner and re-inspect.

  4. Repeat cleaning regimen

    If contaminants persist, use a wet cleaning fluid like Chemtronics Electro-Wash PX on a swab, rub the end face, dry it, and re-inspect until clean.

  5. Cap the connectors

    Once the connectors are clean, replace the dust caps to prevent future contamination.

Frequently Asked Questions about Panduit

What environmental ratings do Panduit products have?

Panduit products feature comprehensive environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13; CSA Type 1, 2, 3, 4, 4X, 12, and 13; and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They meet IEC 60529 IP66 rating, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments, with operating temperatures ranging from -40°C to 130°C.

What certifications and standards do Panduit products comply with?

Panduit products are certified to multiple critical industry standards, including UL (Underwriters Laboratories) in the USA and Canada, CSA (Canadian Standard Association), EN IEC 61386, LVD 2006/G5/EC, and ARRA standards. Our products meet rigorous certifications for electrical safety, environmental compliance (WEEE and RoHS), and are designed to perform in extreme temperatures ranging from -55°C to 105°C, making them suitable for demanding industrial environments.

What industries and applications are Panduit products used for?

Panduit products are engineered for critical applications across multiple industries, including commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety-critical environments. Their solutions span electrical infrastructure, wire management, cable ties, power connectors, and safety systems designed to withstand extreme conditions like high vibration, temperature variations, UV exposure, and corrosive agents. Key industries include solar and wind energy, aerospace, heavy trucking, military, commercial transportation, and industrial manufacturing.

What are the main product lines offered by Panduit?

Panduit offers a comprehensive range of electrical infrastructure products including power connectors, cable ties, grounding connectors, identification products, safety solutions, terminals, cable cleats, wiring duct, and cable tie accessories. These products are engineered for industrial environments across multiple sectors like commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications.

What are the key features of Panduit products?

Panduit products are engineered for robust performance in heavy-duty industrial environments, featuring a comprehensive range of solutions including cable ties, power connectors, terminals, and identification products. Key features include proven quality performance, subject matter expertise, and customer-driven innovation across multiple industrial sectors such as commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications. The product line is designed to maximize productivity, reliability, and safety while meeting stringent industry standards.

What is Panduit's warranty policy?

Panduit provides a comprehensive Limited Product Warranty that can be fully reviewed on their official website at www.panduit.com/warranty. All Panduit products are subject to the terms, conditions, and limitations of this current warranty. Customers are advised to review the specific warranty details for their particular product, as Panduit requires buyers to determine product suitability for their intended use and assumes all associated risks.

What technical support does Panduit offer?

Panduit offers comprehensive technical support through their dedicated customer service team, accessible via phone at 1-800-777-3300. They provide expert assistance for their full range of industrial infrastructure products, including cable ties, power connectors, terminals, and identification solutions. Customers can also access additional technical resources and product information through their website at www.panduit.com.

What accessories are available for Panduit products?

Panduit offers a wide range of accessories across multiple product lines, including cable ties, cable tie accessories, cable tie tools, identification products, cable cleats, grounding connectors, and VeriSafe accessories like the VeriSafe Network Module and Insulation Piercing Connectors. For a comprehensive view of all available accessories, customers are recommended to visit www.panduit.com for the full product catalog.

How are Panduit products typically installed?

Panduit products are engineered for comprehensive installation across industrial environments, utilizing specialized tools and techniques for precise mounting. Installation methods vary by product line - from cable ties and power connectors to terminals and identification solutions - but all are designed for robust performance in heavy-duty settings. Technicians typically use Panduit's dedicated installation tools and follow manufacturer guidelines available at www.panduit.com to ensure proper fitting and maximum infrastructure reliability.