Authorized Panduit Distributor
Panduit FR12TB58M - Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 16mm threaded rod.
Panduit

FR12TB58M

UPC: 074983847457

Documents & Media
Technical DrawingFull Engineering DrawingInstallation InstructionsVideo Clip

Contact for Pricing

Overview

The Panduit FR12TB58M is a specialized trapeze-style support bracket engineered for the Panduit 12x4 cable routing system. This bracket is designed to span two threaded rod drops spaced precisely 18 inches apart, providing a stable and secure mounting platform for cable management infrastructure. Installation flexibility is a core feature, allowing for top-down or bottom-up mounting to accommodate site-specific constraints. The bracket secures to each 16mm threaded rod using two nuts per rod, ensuring a rigid and vibration-resistant connection. Pre-assembled slide clamps enable rapid attachment to Panduit channel systems (FR12X4, FR4X4, FR6X4), reducing installation time by eliminating separate clamp assembly steps. The slide clamps require a 7/16-inch nut driver for tightening, streamlining the assembly process. Compatible with standard 16mm threaded rod hardware, the FR12TB58M integrates seamlessly with Panduit’s Fiber Runner 12x4 and QuikLock trapeze bracket systems. This bracket is part of Panduit’s raceway systems division, a leader in industrial cable management solutions. Its design prioritizes structural integrity and ease of installation, making it ideal for data centers, industrial facilities, and commercial buildings requiring organized cable pathways. The bracket’s trapeze configuration distributes load evenly across the threaded rod drops, minimizing sag and maintaining alignment of supported cables. For applications requiring multiple brackets, typical installations use four brackets per run (e.g., FRSLNKT12 or FRSLNKT58M linkers). The FR12TB58M is a component of Panduit’s instruction sheet RW153B system, ensuring compatibility with existing Panduit cable routing infrastructure.
  • Spans two 16mm threaded rod drops spaced 18 inches apart
  • Top-down or bottom-up installation for flexible mounting
  • Secures to rods with two nuts per drop for rigid connection
  • Pre-assembled slide clamps for fast attachment to Panduit 12x4 channel
  • Requires 7/16-inch nut driver for clamp tightening
  • Designed for 16mm threaded rod
  • Requires 7/16in nut driver for slide clamps

Specifications

Application
(1) The Fiberrunner 12X4 Routing System is a System of Channel, Fittings and Brackets Designed to Segregate, Route, and Protect Fiber Optic and High PerformanceCopper Cabling, (2) It is Suited for Data Center Applicationswhere Cable is Routed from Distr
Cable Specification
12 x 4 FiberRunner Brackets
Height
0.86 in
Height
21.844 mm
Length
21.52 in
Length
546.608 mm
Material
Steel
Standard
UL Listed to 2024 Optical Fiber Cable Routing Assemblies, Compliant with the Applicable Tests in Telcordia Gr-63-Core, Network Equipment Building Systems Level 3, LP-CSISPEC-FR
Type
Trapeze Bracket
Width
2.26 in
Width
57.404 mm
Package Dimensions (L x W x H)
24.8 IN x 4.4 IN x 2.5 IN
Package Weight (Imperial)
3.25 lbs
Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 5/8in threaded rod.

FR12TB58

Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 5/8in threaded rod.
PVC Coated Cable Tray Conduit Clamp, Conduit Size 2 Inch, Gray

LCC6-G

PVC Coated Cable Tray Conduit Clamp, Conduit Size 2 Inch, Gray
Self-tapping screws allow selected 24x4 and 12x4 fittings to be fastened directly to mounting brackets for additional support. Screws tap directly into those 24x4 and 12x4 fittings that have plastic bosses.

FR12BS-L

Self-tapping screws allow selected 24x4 and 12x4 fittings to be fastened directly to mounting brackets for additional support. Screws tap directly into those 24x4 and 12x4 fittings that have plastic bosses.
4x4 Up Spout. Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2in (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid in. A 1in (25.4mm) top bezel is included. Other fittings can be installed for specific applications including FTR4X4YLL and FIDT4X4BL. Yellow.

FRUPS4X4YL

4x4 Up Spout. Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2in (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid in. A 1in (25.4mm) top bezel is included. Other fittings can be installed for specific applications including FTR4X4YLL and FIDT4X4BL. Yellow.
Optional split hinged cover for the channel FR6X4YL6. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30 and 90 .

FRSHC6YL6

Optional split hinged cover for the channel FR6X4YL6. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30 and 90 .
Used to support the 6x4 and 4x4 systems attaching to the top of NetFrame or NetRack Rack. (Contains all necessary mounting hardware.) Bracket accepts 5/8" threaded rod.

FRRMBNF58

Used to support the 6x4 and 4x4 systems attaching to the top of NetFrame or NetRack Rack. (Contains all necessary mounting hardware.) Bracket accepts 5/8" threaded rod.
6x4 Up Spout. Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2in (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid in. A 1 (25.4mm) top bezel is included. Yellow. Other fittings can be installed for specific applications including FTR4X4YL and FIDT4X4BL.

FRUPS6X4YL

6x4 Up Spout. Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2in (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid in. A 1 (25.4mm) top bezel is included. Yellow. Other fittings can be installed for specific applications including FTR4X4YL and FIDT4X4BL.
Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver on slide clamps, For 3/8in threaded rod.

FR6TB38

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver on slide clamps, For 3/8in threaded rod.

How to Install the FR12TB58M Controller

This guide provides step-by-step instructions for installing and configuring the FR12TB58M controller for optimal performance.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Terminal connectors

  1. Mount the controller

    Secure the FR12TB58M controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.

  2. Connect the wiring

    Use terminal connectors to connect the power and communication wires to the appropriate terminals on the FR12TB58M controller. Ensure all connections are tight and secure.

  3. Verify the installation

    Use a multimeter to check the voltage at the power terminals to ensure proper power supply. Confirm that all connections are correct and secure before powering on the controller.

  4. Configure the controller settings

    Follow the manufacturer's guidelines to program the initial settings of the FR12TB58M controller using the provided software or interface.

  5. Calibrate the controller

    Perform any necessary calibration procedures as outlined in the user manual to ensure the controller operates within specified parameters.

Frequently Asked Questions about Panduit

What environmental ratings do Panduit products have?

Panduit products feature comprehensive environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13; CSA Type 1, 2, 3, 4, 4X, 12, and 13; and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They meet IEC 60529 IP66 rating, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments, with operating temperatures ranging from -40°C to 130°C.

What certifications and standards do Panduit products comply with?

Panduit products are certified to multiple critical industry standards, including UL (Underwriters Laboratories) in the USA and Canada, CSA (Canadian Standard Association), EN IEC 61386, LVD 2006/G5/EC, and ARRA standards. Our products meet rigorous certifications for electrical safety, environmental compliance (WEEE and RoHS), and are designed to perform in extreme temperatures ranging from -55°C to 105°C, making them suitable for demanding industrial environments.

What industries and applications are Panduit products used for?

Panduit products are engineered for critical applications across multiple industries, including commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety-critical environments. Their solutions span electrical infrastructure, wire management, cable ties, power connectors, and safety systems designed to withstand extreme conditions like high vibration, temperature variations, UV exposure, and corrosive agents. Key industries include solar and wind energy, aerospace, heavy trucking, military, commercial transportation, and industrial manufacturing.

What are the main product lines offered by Panduit?

Panduit offers a comprehensive range of electrical infrastructure products including power connectors, cable ties, grounding connectors, identification products, safety solutions, terminals, cable cleats, wiring duct, and cable tie accessories. These products are engineered for industrial environments across multiple sectors like commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications.

What are the key features of Panduit products?

Panduit products are engineered for robust performance in heavy-duty industrial environments, featuring a comprehensive range of solutions including cable ties, power connectors, terminals, and identification products. Key features include proven quality performance, subject matter expertise, and customer-driven innovation across multiple industrial sectors such as commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications. The product line is designed to maximize productivity, reliability, and safety while meeting stringent industry standards.

What is Panduit's warranty policy?

Panduit provides a comprehensive Limited Product Warranty that can be fully reviewed on their official website at www.panduit.com/warranty. All Panduit products are subject to the terms, conditions, and limitations of this current warranty. Customers are advised to review the specific warranty details for their particular product, as Panduit requires buyers to determine product suitability for their intended use and assumes all associated risks.

What technical support does Panduit offer?

Panduit offers comprehensive technical support through their dedicated customer service team, accessible via phone at 1-800-777-3300. They provide expert assistance for their full range of industrial infrastructure products, including cable ties, power connectors, terminals, and identification solutions. Customers can also access additional technical resources and product information through their website at www.panduit.com.

What accessories are available for Panduit products?

Panduit offers a wide range of accessories across multiple product lines, including cable ties, cable tie accessories, cable tie tools, identification products, cable cleats, grounding connectors, and VeriSafe accessories like the VeriSafe Network Module and Insulation Piercing Connectors. For a comprehensive view of all available accessories, customers are recommended to visit www.panduit.com for the full product catalog.

How are Panduit products typically installed?

Panduit products are engineered for comprehensive installation across industrial environments, utilizing specialized tools and techniques for precise mounting. Installation methods vary by product line - from cable ties and power connectors to terminals and identification solutions - but all are designed for robust performance in heavy-duty settings. Technicians typically use Panduit's dedicated installation tools and follow manufacturer guidelines available at www.panduit.com to ensure proper fitting and maximum infrastructure reliability.