Panduit DN6212W Net-Verse D-Type Cabinet frame, 42RU. Top panel with brush openings. Two sets cage nut…
UPC: 613056573178
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 42RU, 19-inch rack enclosure with 2500 lb static load rating
- Welded 12-gauge steel frame with infinitely adjustable rack angles (EIA 310-D tapped holes)
- Single-hinged perforated front door and split perforated rear doors for optimized airflow
- Top panel with brush openings and gland plate for clean cable routing
- Includes two full-length PDU brackets and 20x 10-32 screws; shipped with two keys
Specifications
Color | White |
Depth | 39.37 In. |
Height | 80.5 In. |
Material | Steel |
Standard | EIA-310-E / TIA/EIA-942, RoHS Compliant, UL 2416 |
Type | D-Type Cabinet |
Width | 23.62 In. |
Package Dimensions (L x W x H) | 45.6576 IN x 27.3552 IN x 86.0016 IN |
Package Weight (Imperial) | 310.76 lbs |
DN6512W
Net-Verse D-Type Cabinet frame, 45RU. Top panel with brush openings. Two sets cage nut equipment rails. Single hinge perforated front door. Split perforated rear doors. Horizontally split side panels (4). 2 full length PDU brackets. Dimensions: 85.7in H x 23.6in W x 39.4in D (2178mm x 600mm x 1000mm). Color: White.
FC3XO-16-10A
40G-10G OPTICOM CASSETTE WITH OM3 FIBER, OPTIMIZED LOW LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD A CONNECTIVITY
FC3XO-16-10B
40G-10G OPTICOM CASSETTE WITH OM3 FIBER, OPTIMIZED LOW LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD B CONNECTIVITY
FC3ZN-16-10A
40G-10G OPTICOM CASSETTE WITH OM4 FIBER, STANDARD LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD A CONNECTIVITY
FQ3ZN-08-10A
40G-10G QUICKNET SFQ CASSETTE WITH OM4 FIBER, STANDARD LOSS, 8-FIBERS TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD A CONNECTIVITY
FC3ZO-16-10A
40G-10G OPTICOM CASSETTE WITH OM4 FIBER, OPTIMIZED LOW LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD A CONNECTIVITY
DN6222W
Net-Verse D-Type Cabinet frame, 42RU. Top panel with brush openings. Two sets cage nut equipment rails. Single hinge perforated front door. Split perforated rear doors. Horizontally split side panels (4). 2 full length PDU brackets. Dimensions: 80.5in H x 23.6in W x 47.2in D (2045mm x 600mm x 1200mm). Color: White.
FQ3ZO-08-10B
40G-10G QUICKNET SFQ CASSETTE WITH OM4 FIBER, OPTIMIZED LOW LOSS, 8-FIBERS TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD B CONNECTIVITYFrequently Asked Questions
What are the dimensions of the DN8212B cabinet?
The DN8212B cabinet is 800mm (31.5 inches) wide, 1000mm (39.4 inches) deep, and 2045mm (80.5 inches) high, including casters.
What are the load ratings for the Net-Verse cabinet?
The cabinet has a static load rating of 1,500kg (3,300 lbs.) and a rolling load rating of 500kg (1,100 lbs.).
What compliance standards do Net-Verse cabinets meet?
Net-Verse cabinets comply with EIA-310-E, TIA/EIA-942, and UL2416 standards.
What is the material and finish of the cabinet?
The cabinet is constructed from steel with a durable black powder coat finish.
What are the air flow specifications for the doors?
The curved perforated front single hinge doors provide a 69% air flow rate.
How are Net-Verse cabinets shipped?
The cabinet ships fully assembled, with one cabinet per pallet.
Are cable management fingers available for 800mm wide cabinets?
Yes, modular cable management fingers are optional accessories for 800mm wide cabinets, providing bend radius control.
What type of equipment rails are included?
The cabinet includes fully adjustable cage nut equipment rails with RU markings for correct IT equipment location.
Can multiple Net-Verse cabinets be ganged together?
Yes, the cabinet comes equipped with the necessary brackets and hardware to gang adjoining Net-Verse™ Cabinets.
Is the cabinet electrically bonded?
Yes, the entire cabinet is fully electrically bonded, including equipment rails, doors, and side panels.
How to Install the DN6212W Net-Verse D-Type Cabinet
Installation guide for mounting and securing the DN6212W Net-Verse D-Type Cabinet.
Estimated time: 1h
Tools needed:
13mm Socket Wrench, 19mm Wrench, 122mm Level, T25 Torx driver, 8mm Hex Driver
Supplies needed:
Mounting screws, Anchors for floor mounting, Grounding Lug or Grounding Bar
- Remove Packaging Materials
Remove all stretch wrap, protective cardboard, and plastic bags from the exterior of the cabinet. Follow side panel removal instructions (Page 17) to remove protective foam and connect ground whips. Remove the two shipping hold down brackets at the front and rear of the cabinet. Use at least two persons to carefully lift and remove the cabinet from the pallet. Retain the hold down brackets if floor mounting is desired.
- Position and Level the Cabinet
Ensure the leveling legs are fully retracted. Slide the cabinet into its final position. Lower the four leveling legs until the cabinet's weight is fully supported by them. Use a 122mm level and a 19mm wrench to adjust the four leveling legs so the cabinet is level front-to-back and side-to-side.
- Secure the Cabinet to the Floor (Optional)
Ensure the four leveling legs are fully retracted. Secure the two shipping hold down brackets at the front and rear of the cabinet. Attach the anchors to the floor using appropriate hardware for your floor type. WARNING: Mount the cabinet to the floor before installing more than 500Kg (1102lbs.) of equipment to prevent tipping.
- Gang Multiple Cabinets (Optional)
Ensure cabinets are level. Remove the four side caps from the sides of the cabinets that will be ganged together. Secure the ganging brackets to the cabinets at two front and two back locations using M5 button head screws and a T25 Torx bit. Do not use ganging brackets to cinch cabinets together. WARNING: Ganging provides limited stability; ensure cabinets are properly mounted to the floor before loading.
- Ground the Cabinet
DANGER: Electrical Shock Hazard. Each cabinet must be connected to the Common Bonding Network (CBN). Attach a grounding lug or grounding bar (not included) to the Common Bonding Network (CBN), utilizing any bonus hole along the front-to-rear members of the frame. Ensure all doors, top caps, and side panels are properly connected to the cabinet frame via their terminals.
- Adjust Equipment Rail Spacing
WARNING: Falling Equipment Hazard. Remove all equipment installed onto the equipment rails before performing adjustments. For 600mm wide cabinets, remove three M5 screws from the top, middle, and bottom of the equipment rails using a T25 Torx bit. For 800mm wide cabinets, remove two M5 screws from the top and bottom, and two from the middle extensions. Adjust rails to the desired position and re-install M5 screws to 2.7 ± 0.3 N·m [23.9 ± 2.7 in-lbs].
- Install Cable Management Fingers (800mm Cabinets Only)
Adjust the two front E-rails back a minimum of 63.2mm [2.5”] as per the equipment rail spacing adjustment instructions. Install the Cable Management Finger Bracket (sold separately). Insert the tabs of the Cable Management Finger into the mounting slots next to the front Equipment Rails and slide inward to lock into place.
- Install Power Distribution Units (PDUs)
Install the first two PDUs on the two farthest back locations on either side of the cabinet. For additional PDU installation on the same side, remove the screw from the middle of the bracket. Ensure the PDU buttons align with the cabinet mounting points.
- Install Doors and Side Panels
Follow the specific instructions on pages 15, 16, and 17 for the removal and installation of single hinge doors, rear split doors, and side panels, respectively. Remember to detach and reattach grounding terminals as instructed and ensure side panels have their grounding whips attached prior to equipment installation.
Frequently Asked Questions about Panduit
What environmental ratings do Panduit products have?
Panduit products feature comprehensive environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13; CSA Type 1, 2, 3, 4, 4X, 12, and 13; and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They meet IEC 60529 IP66 rating, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments, with operating temperatures ranging from -40°C to 130°C.
What certifications and standards do Panduit products comply with?
Panduit products are certified to multiple critical industry standards, including UL (Underwriters Laboratories) in the USA and Canada, CSA (Canadian Standard Association), EN IEC 61386, LVD 2006/G5/EC, and ARRA standards. Our products meet rigorous certifications for electrical safety, environmental compliance (WEEE and RoHS), and are designed to perform in extreme temperatures ranging from -55°C to 105°C, making them suitable for demanding industrial environments.
What industries and applications are Panduit products used for?
Panduit products are engineered for critical applications across multiple industries, including commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety-critical environments. Their solutions span electrical infrastructure, wire management, cable ties, power connectors, and safety systems designed to withstand extreme conditions like high vibration, temperature variations, UV exposure, and corrosive agents. Key industries include solar and wind energy, aerospace, heavy trucking, military, commercial transportation, and industrial manufacturing.
What are the main product lines offered by Panduit?
Panduit offers a comprehensive range of electrical infrastructure products including power connectors, cable ties, grounding connectors, identification products, safety solutions, terminals, cable cleats, wiring duct, and cable tie accessories. These products are engineered for industrial environments across multiple sectors like commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications.
What are the key features of Panduit products?
Panduit products are engineered for robust performance in heavy-duty industrial environments, featuring a comprehensive range of solutions including cable ties, power connectors, terminals, and identification products. Key features include proven quality performance, subject matter expertise, and customer-driven innovation across multiple industrial sectors such as commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications. The product line is designed to maximize productivity, reliability, and safety while meeting stringent industry standards.
What is Panduit's warranty policy?
Panduit provides a comprehensive Limited Product Warranty that can be fully reviewed on their official website at www.panduit.com/warranty. All Panduit products are subject to the terms, conditions, and limitations of this current warranty. Customers are advised to review the specific warranty details for their particular product, as Panduit requires buyers to determine product suitability for their intended use and assumes all associated risks.
What technical support does Panduit offer?
Panduit offers comprehensive technical support through their dedicated customer service team, accessible via phone at 1-800-777-3300. They provide expert assistance for their full range of industrial infrastructure products, including cable ties, power connectors, terminals, and identification solutions. Customers can also access additional technical resources and product information through their website at www.panduit.com.
What accessories are available for Panduit products?
Panduit offers a wide range of accessories across multiple product lines, including cable ties, cable tie accessories, cable tie tools, identification products, cable cleats, grounding connectors, and VeriSafe accessories like the VeriSafe Network Module and Insulation Piercing Connectors. For a comprehensive view of all available accessories, customers are recommended to visit www.panduit.com for the full product catalog.
How are Panduit products typically installed?
Panduit products are engineered for comprehensive installation across industrial environments, utilizing specialized tools and techniques for precise mounting. Installation methods vary by product line - from cable ties and power connectors to terminals and identification solutions - but all are designed for robust performance in heavy-duty settings. Technicians typically use Panduit's dedicated installation tools and follow manufacturer guidelines available at www.panduit.com to ensure proper fitting and maximum infrastructure reliability.