Authorized NSI Industries Distributor
NSI Industries IPLMD600-10 - The Polaris IPLMD600-10 Multi-Tap Mountable Dual-Sided Entry Connector features 10 ports sized for 600 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
More images

NSI Industries IPLMD600-10 The Polaris IPLMD600-10 Multi-Tap Mountable Dual-Sided Entry Connector features 10 ports…

UPC: 662381789228

Documents & Media
BrochureTechnical BulletinInstallation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

This 10-port connector accommodates wire sizes from 600 MCM down to 6 AWG, supporting both copper and aluminum conductors with a dual-rated current capacity of 2070A (copper) and 1620A (aluminum). The aluminum alloy body is coated with high-dielectric strength plastisol insulation, providing abrasion, chemical, and UV resistance while maintaining a non-combustible construction. The connector features dual-sided wire entry ports with removable access plugs, allowing installation flexibility from either side of the trough, panel, or wireway. Mounting is simplified with 1/4" bolt holes on both ends for direct attachment to installation surfaces. Each port is pre-loaded with oxide inhibitor and secured using hex screws tightened to specified torque values, eliminating the need for additional taping or covers. The IPLMD600-10 operates reliably in temperatures as low as -45°C and is rated for 600V service. Designed for use in cable trays, panel boards, ducts, raceways, or troughs, this connector streamlines splicing operations by reducing installation time and material requirements. The ergonomic, molded design ensures a comfortable grip during handling and installation.
  • Dual-Side Wire Entry: Form secure connections between 6 conductors quickly using the double-side entry ports sized for wires between 600 MCM and 6 AWG
  • Mounting Holes: Installation is simple with mounting holes on either side of the connector to attach directly to panels or troughs using 1/4" bolts
  • Ergonomic Design: The plastisol insulation features rounded corners for a comfortable grip and is UV, abrasion and chemical-resistant for durable performance
  • Removable Plugs: Each port and adjustable set screw is covered by a secure plug to prevent debris, moisture or contaminants from entering the insulated connector
  • Parallel Rated: This connector is specifically designed and rated for parallel installation, providing a safe and secure way to handle larger projects

Specifications

Aluminum Conductor Max AMP
1620 Amp
Aluminum Conductor Note
Dual Rated for use with copper and or aluminum cables. Not for use with fine-stranded, flexible cables. Parallel Rated to provide safety and NEC compliance when installing parallel runs. No more than 4 input parallel wires.++ For more ampacity -requires installation according to NEMA guidelines - staggering the inputs & outputs & Deratting for more than 3 conductors in a raceway
Application
Wire Termination
Color
Black
Copper Conductor Max
2070 Amp
Environmental Conditions
75 C
Finish
Plastisol Insulated
Housing Material
Aluminum
Housing Material
Aluminium
Material
Aluminum
Number Of Conductors
10
Number Of Poles
1
Size
L=14.98 - W=2.960 - H=3.150 IN
Special Features
(10) 600 MCM-6 AWG - Dual Rated - With Mounting Holes
Standard
UL 486A/B
Temperature Rating
75 C
Temperature Rating, Maximum
167 F
Temperature Rating, Maximum
75 C
Temperature Rating, Minimum
167 F
Temperature Rating, Minimum
75 C
Type
Double Sided Entry With Mounting Holes
Voltage Rating
600 V
Warranty
1 Year
Wire Size
600 MCM-6 AWG
Wire Type
Class B & C
Wire/Cable Class
Class B, Class C
Package Dimensions (L x W x H)
14.98 IN x 2.96 IN x 3.15 IN
Package Dimensions (L x W x H)
38.0492 cm x 7.5184 cm x 8.001 cm
Package Weight (Imperial)
3.956 L
Package Weight (Metric)
1.794 kg
The Polaris ISR-600 Multi-Tap In-Line Entry Connector features 2 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

ISR-600

The Polaris ISR-600 Multi-Tap In-Line Entry Connector features 2 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Aluminum Slotted Tang Compression Terminal Lug - Color Black, Conductor Size Concentric 3/0 stranded Compressed Compact 3/0 solid 4/0 solid, Installation Dies, BY37, 840U, B49EA, K840, 2 Slots.. For Aluminum and Copper Conductors

LAC302

Aluminum Slotted Tang Compression Terminal Lug - Color Black, Conductor Size Concentric 3/0 stranded Compressed Compact 3/0 solid 4/0 solid, Installation Dies, BY37, 840U, B49EA, K840, 2 Slots.. For Aluminum and Copper Conductors
Panduit DV18-250B-3K Female Disconnect

DV18-250B-3K

Panduit DV18-250B-3K Female Disconnect
Rectangular Power Connectors, Housing, Receptacle / Plug, Wire-to-Wire, 1 Position, Wire & Cable, UL 94V-2, Power, Panel Mount

53884-1

Rectangular Power Connectors, Housing, Receptacle / Plug, Wire-to-Wire, 1 Position, Wire & Cable, UL 94V-2, Power, Panel Mount
The Polaris IT-600 Multi-Tap Dual-Side Entry Connector features 2 ports sized for 600 MCM to 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IT-600

The Polaris IT-600 Multi-Tap Dual-Side Entry Connector features 2 ports sized for 600 MCM to 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Polaris IPLMD600-12 Multi-Tap Mountable Dual-Sided Entry Connector features 12 ports sized for 600 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLMD600-12

The Polaris IPLMD600-12 Multi-Tap Mountable Dual-Sided Entry Connector features 12 ports sized for 600 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Polaris IPL600-3 Multi-Tap Single Side Entry Connector features 3 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPL600-3

The Polaris IPL600-3 Multi-Tap Single Side Entry Connector features 3 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Polaris IPL600-4 Multi-Tap Single Side Entry Connector features 4 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPL600-4

The Polaris IPL600-4 Multi-Tap Single Side Entry Connector features 4 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Frequently Asked Questions

What is the operating voltage for IPLMD600-10?

The IPLMD600-10 operates at 500V.

What are the compatible products for IPLMD600-10?

Compatible products include BIBD60010MT and PBTD-10-500-M.

What is the temperature range for IPLMD600-10?

The operating temperature range is not specified in the document.

What are the installation requirements for IPLMD600-10?

Installation requirements are not detailed in the document.

How do I troubleshoot issues with IPLMD600-10?

Troubleshooting steps are not provided in the document.

What maintenance is required for IPLMD600-10?

Maintenance requirements are not specified in the document.

Are there any safety warnings for IPLMD600-10?

Safety warnings are not mentioned in the document.

How to Install the IPLMD600-10 BLACK & VISION TAP®

Instructions for installing the IPLMD600-10 BLACK & VISION TAP® connector, including wire preparation and securement.

Estimated time: 15m

Tools needed:

Wire brush, Hex wrench set

Supplies needed:

Conductors, Oxide inhibitor gel (pre-filled in connector)

  1. Prepare the Wire

    Strip the wire insulation according to Chart 1. If oxidation is present on the conductor, clean it with a wire brush.

  2. Insert Conductors

    Insert each conductor into a different port of the connector. Ensure the wire insulation extends at least 3/8" into the connector port.

  3. Secure Pressure Screws

    Secure the pressure screws using the appropriate hex wrench size and torque value specified in Chart 2. Refer to the product's nameplate or datasheet for specific torque values if they vary.

Frequently Asked Questions about NSI Industries

How are Tork products typically installed?

Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.

What environmental ratings do Tork products have?

Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.

What communication protocols do Tork products support?

Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.

What are the key features of Tork products?

Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.

What are the main product lines offered by Tork?

Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.

What technical support does Tork offer?

Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.

What industries and applications are Tork products used for?

Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.

What certifications and standards do Tork products comply with?

Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.

How are Remke products typically installed?

Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.

What accessories are available for Remke products?

Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.