Contact for Pricing
Overview
- 101-piece kit for secure drywall mounting
- Includes 50 #8 x 1-1/4" Phillips head drywall anchors
- 75 lb load capacity (with 5/8" drywall)
- Durable metal anchors with plastic screws
- No pre-drilling required; includes #2 Phillips driver bit
Specifications
Application | Attaches through gypsum and wood also works in double drywall applications. Not for use with overhead applications. |
Diameter | 0.164" IN |
Drill Size | Not Applicable |
Finish | Zinc Die Cast |
Kit Includes | 50pc(s) EZ-STUD Solver™ 1 pc(s) #2 Driver Bit |
Kit Includes | 50pc(s) EZ-STUD Solver™; 1 pc(s) #2 Driver Bit |
Length | 1.250" IN |
Material | Metal |
Material | Carbon Steel |
Material | Metal/Plastic |
Mounting Type | Drywall Mount |
Mounting Type | Drywall Anchor |
Screw Size | #2 x 2.000" IN |
Size | #8 x 1-1/4" |
Special Features | No hole preparation necessary pre-drills own small precise hole in gypsum wallboard. Installs quickly and easily with a phillips screw-driver or square drive bit. |
Type | EZ-Anchor |
Package Weight (Imperial) | 0.86 lbs |
39940-6
A double drywall anchor kit with a Phillips drive, sized #8 x 1-1/4 in. It is made of carbon steel with a zinc die cast finish. The anchor is designed to attach through gypsum and wood and also works in double drywall applications.
39916J
Drywall anchor kit with a zinc die cast anchor and steel screws. The anchor is zinc plated and sized for #8 x 1-1/4" screws, with a 1/2" diameter and 1-5/8" length. It is intended for drywall and horizontal applications and is listed with a holding weight of 50 lbs in 1/2 drywall.
60016J
Sleeve type hollow wall anchor for use in pre-drilled holes in drywall, sheetrock, plaster, wallboard, or hollow tile. It is made of steel/carbon steel with a zinc plated finish. The anchor size is 1/4 in. short, with a 2-1/4 in. length and a 1/2 in. drill size. The sheet lists a 2-3/8 in. screw length and a 5/8 in. to 1/8 in. grip range.
61161J
A vertical threaded rod anchor that installs vertically into the bottom of steel structures for hanging threaded rod. It is made of steel with a Climaseal and electro-zinc finish. The anchor is sized 1/2"-13 with a 0.500" diameter and uses a 5/16"-18 x 1-1/4" screw size.
39413
This is a hollow wall anchor kit for wall fastening applications. The anchor body is polypropylene and the sheet lists a flanged head type, with a size of #8-10 (AF5). Key dimensions shown are 0.188 in diameter, 1.000 in length, 1.500 in minimum embedment depth, and a 3/16 in drill size.
39906
A conical anchor kit designed for use with lightweight fixtures. It can be used in concrete, block, brick, and wallboard. The sheet does not list material, finish, or dimensional attributes.
59505J
Steel wall anchor with a white finish and Phillips pan head. Size is 1/4" x 1-1/4" with a 3/16" drill size. Suitable for concrete, brick, wallboard, plywood, plaster, and steel, and is described as a one-piece screw anchor with high-profile threads for fastening into wallboard and other masonry base materials.Frequently Asked Questions
What size screws are included with the 39940J anchor kit?
The Minerallac 39940J kit includes #8 x 1-1/4" Phillips head screws for the drywall anchors.
What is the weight capacity of the Minerallac 39940J anchors?
The #8 x 1-1/4" Phillips head drywall anchors in the 39940J kit have a load capacity of up to 75 lbs when used with 5/8" drywall.
Does the Minerallac 39940J kit require pre-drilling for installation?
No, pre-drilling is not required for the Minerallac 39940J double drywall anchors.
What type of screwdriver is needed for the 39940J anchor kit?
Installation of the Minerallac 39940J anchors is straightforward using a #2 Phillips screwdriver. The kit includes a #2 x 2" Phillips driver bit.
Can the Minerallac 39940J anchors be used for overhead applications?
No, the Minerallac 39940J double drywall anchor kit is not recommended for overhead applications.
How to Install the Minerallac 39940J Double Drywall Anchor
Step-by-step guide for installing the Minerallac 39940J double drywall anchors.
Estimated time: 5m
Tools needed:
#2 Phillips screwdriver
Supplies needed:
Minerallac 39940J Double Drywall Anchor Kit
- Position the anchor
Place the #8 x 1-1/4" Phillips head drywall anchor at the desired mounting location on the drywall. Ensure it is perpendicular to the surface.
- Insert the screw
Using a #2 Phillips screwdriver (or the included #2 x 2" Phillips driver bit), begin driving the plastic screw into the anchor. The anchor will expand as the screw is tightened.
- Secure the item
Continue tightening the screw until the anchor is firmly seated in the drywall and the item to be mounted is secure. Do not overtighten.
Frequently Asked Questions about Minerallac Company
What are the main product lines offered by Minerallac Company?
Minerallac Company offers multiple comprehensive product lines including Minerallac Traditional (electrical fasteners), Strut Fittings, Stainless Steel Fasteners, Black Claw, Impact Staples, and Redmore. Their Traditional line features over a thousand electrical fastener variations covering conduit/cable/wire products, nail straps, beam clamps, metal stud & drywall accessories, acoustical supports, voice/data hardware, and miscellaneous electrical installation components.
What is Minerallac Company's warranty policy?
Minerallac Company provides a limited warranty that guarantees all products are free from defects in material and workmanship. If a product fails to meet this warranty, Minerallac's sole liability is to replace the product at no charge. The warranty is exclusive and does not cover consequential damages, lost profits, or implied warranties of merchantability or fitness for a particular purpose.
What industries and applications are Minerallac Company products used for?
Minerallac Company products are used extensively across electrical, construction, and industrial applications, including conduit and cable support, beam mounting, metal stud and drywall installation, voice/data infrastructure, and low voltage systems. Their product lines cover critical fastening solutions for electrical contractors, with specialized offerings in conduit hangers, straps, beam clamps, cable supports, and mounting hardware for various industrial environments.
What technical support does Minerallac Company offer?
Minerallac Company offers comprehensive technical support through multiple channels, including a toll-free customer service line at 800-927-3293, email support at [email protected], and online resources at www.minerallac.com. Their support covers product selection, technical specifications, and customer service for their extensive line of electrical fasteners, hangers, straps, and hardware across multiple product brands including Minerallac Traditional, Cully, Black Claw, IMPACT Staples, and Minerallac Stainless Steel. Support hours are 8:00 A.M. to 5:00 P.M. CT for their corporate office and 8:00 A.M. to 5:00 P.M. PT for their regional office.
What are the key features of Minerallac Company products?
Minerallac Company products feature a comprehensive range of electrical fasteners and hardware with exceptional versatility, including over 1,000 different sizes, styles, and finishes. Key features include multiple product lines such as Traditional, Strut Fittings, and Stainless Steel options with specialized finishes like 304/316 Stainless Steel, Hot-Dipped Galvanized, and Zinc Electroplate. Their products are engineered for electrical contractors, offering time-saving solutions with high-quality fasteners designed for durability, corrosion resistance, and worker safety across various installation environments.
What environmental ratings do Minerallac Company products have?
Minerallac Company products have robust environmental ratings, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13 certifications, CSA Type 1-4X, 12, and 13 ratings, and IEC 60529 IP66 protection. The products are WEEE and RoHS compliant, with UV and oil resistance, and can operate in extreme temperatures ranging from -55°C to 105°C, making them suitable for harsh industrial environments.
What accessories are available for Minerallac Company products?
Minerallac Company offers a comprehensive range of accessories across multiple product categories, including hardware, fasteners, and mounting solutions. Key accessories include stove bolts with nuts, wing nut washers, bar joist washers, stud clip adapters, brackets, perforated strapping, cable support options like J-hooks and bridle rings, box mounting brackets, outlet retainers, and various stud and drywall supports. Their accessories are available in multiple finishes such as stainless steel, hot-dipped galvanized, zinc electroplate, and powder-coated options.
How are Minerallac Company products typically installed?
Minerallac Company products are typically installed using a variety of specialized fastening solutions, including conduit hangers, straps, beam clamps, and mounting brackets designed for different electrical and construction applications. Installation methods vary by product type, with options for metal studs, drywall, beams, acoustical surfaces, and low voltage systems. The company offers multiple installation styles such as one-hole and two-hole straps, universal beam clamps, and specific mounting hardware to ensure secure and efficient attachment across diverse electrical and construction environments.
What communication protocols do Minerallac Company products support?
Minerallac Company's Brad product line supports multiple industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, Serial, AS-interface, and CC-Link. Their comprehensive portfolio covers over 40 industrial protocols, providing flexible communication solutions for various industrial automation applications from PC-based control to PLC systems.