Contact for Pricing
Overview
- 201-piece kit includes 50 #8 x 1-1/4" double drywall anchors, 50 Phillips screws, and 1 #2 x 2" driver bit
- Double anchor design for enhanced holding power in light to medium-duty applications
- No pre-drilling required; works with or without wood studs behind drywall
- Up to 75lb load capacity when used with 5/8" drywall
- Easy installation with #2 Phillips screwdriver; removable without damage
Specifications
Application | Attaches through gypsum and wood also works in double drywall applications. Not for use with overhead applications. |
Diameter | 0.164" IN |
Drill Size | Not Applicable |
Finish | Zinc Die Cast |
Kit Includes | 50pc(s) EZ-STUD Solver™ 1 pc(s) #2 Driver Bit |
Length | 1.250" IN |
Material | Steel |
Material | Carbon Steel |
Material | Metal |
Mounting Type | Drywall Mount |
Screw Size | #2 x 2.000" IN |
Size | #8 x 1-1/4" |
Size | 1-1/4" |
Size | #8 x 1-1/4" IN |
Special Features | No hole preparation necessary pre-drills own small precise hole in gypsum wallboard. Installs quickly and easily with a phillips screw-driver or square drive bit. |
Type | EZ-Anchor |
Package Weight (Imperial) | 0.016 lbs |
39940J
This is an EZ-Anchor double drywall anchor with a Phillips drive. It is made of carbon steel with a zinc die cast finish. The anchor is size #8 x 1-1/4" and is intended for gypsum wallboard, including double drywall applications.
39916J
Drywall anchor kit with a zinc die cast anchor and steel screws. The anchor is zinc plated and sized for #8 x 1-1/4" screws, with a 1/2" diameter and 1-5/8" length. It is intended for drywall and horizontal applications and is listed with a holding weight of 50 lbs in 1/2 drywall.
60016J
Sleeve type hollow wall anchor for use in pre-drilled holes in drywall, sheetrock, plaster, wallboard, or hollow tile. It is made of steel/carbon steel with a zinc plated finish. The anchor size is 1/4 in. short, with a 2-1/4 in. length and a 1/2 in. drill size. The sheet lists a 2-3/8 in. screw length and a 5/8 in. to 1/8 in. grip range.
61161J
A vertical threaded rod anchor that installs vertically into the bottom of steel structures for hanging threaded rod. It is made of steel with a Climaseal and electro-zinc finish. The anchor is sized 1/2"-13 with a 0.500" diameter and uses a 5/16"-18 x 1-1/4" screw size.
39413
This is a hollow wall anchor kit for wall fastening applications. The anchor body is polypropylene and the sheet lists a flanged head type, with a size of #8-10 (AF5). Key dimensions shown are 0.188 in diameter, 1.000 in length, 1.500 in minimum embedment depth, and a 3/16 in drill size.
39906
A conical anchor kit designed for use with lightweight fixtures. It can be used in concrete, block, brick, and wallboard. The sheet does not list material, finish, or dimensional attributes.
59505J
Steel wall anchor with a white finish and Phillips pan head. Size is 1/4" x 1-1/4" with a 3/16" drill size. Suitable for concrete, brick, wallboard, plywood, plaster, and steel, and is described as a one-piece screw anchor with high-profile threads for fastening into wallboard and other masonry base materials.Frequently Asked Questions
What is included in the Minerallac 39940-6 kit?
The kit includes 50 #8 x 1-1/4" double drywall anchors, 50 Phillips #8 x 1-1/4" screws, and one #2 x 2" Phillips driver bit.
What is the load capacity of these anchors?
The anchors support up to a 75lb load when used with 5/8" drywall.
Is pre-drilling required for installation?
No pre-drilling is needed. The anchors work with or without a wood stud behind the drywall.
Can these anchors be used for overhead mounting?
No, the product is not recommended for overhead use.
What screwdriver size is needed for installation?
A #2 Phillips screwdriver is required for installation.
How to Install the Minerallac 39940-6 Double Drywall Anchor Kit
Step-by-step guide to installing the double drywall anchor kit in drywall applications.
Estimated time: 5m
Tools needed:
#2 Phillips screwdriver
Supplies needed:
Mounting fixture
- Mark the mounting location
Determine the desired location on the drywall and mark the spot where the anchor will be installed.
- Insert the anchor
Push the double drywall anchor into the marked hole until it is flush with the drywall surface.
- Drive the screw
Insert the Phillips screw into the anchor and drive it in using a #2 Phillips screwdriver until the fixture is securely mounted.
- Verify stability
Gently tug the mounted fixture to ensure it is secure and stable before use.
Frequently Asked Questions about Minerallac Company
What are the main product lines offered by Minerallac Company?
Minerallac Company offers multiple comprehensive product lines including Minerallac Traditional (electrical fasteners), Strut Fittings, Stainless Steel Fasteners, Black Claw, Impact Staples, and Redmore. Their Traditional line features over a thousand electrical fastener variations covering conduit/cable/wire products, nail straps, beam clamps, metal stud & drywall accessories, acoustical supports, voice/data hardware, and miscellaneous electrical installation components.
What is Minerallac Company's warranty policy?
Minerallac Company provides a limited warranty that guarantees all products are free from defects in material and workmanship. If a product fails to meet this warranty, Minerallac's sole liability is to replace the product at no charge. The warranty is exclusive and does not cover consequential damages, lost profits, or implied warranties of merchantability or fitness for a particular purpose.
What industries and applications are Minerallac Company products used for?
Minerallac Company products are used extensively across electrical, construction, and industrial applications, including conduit and cable support, beam mounting, metal stud and drywall installation, voice/data infrastructure, and low voltage systems. Their product lines cover critical fastening solutions for electrical contractors, with specialized offerings in conduit hangers, straps, beam clamps, cable supports, and mounting hardware for various industrial environments.
What technical support does Minerallac Company offer?
Minerallac Company offers comprehensive technical support through multiple channels, including a toll-free customer service line at 800-927-3293, email support at [email protected], and online resources at www.minerallac.com. Their support covers product selection, technical specifications, and customer service for their extensive line of electrical fasteners, hangers, straps, and hardware across multiple product brands including Minerallac Traditional, Cully, Black Claw, IMPACT Staples, and Minerallac Stainless Steel. Support hours are 8:00 A.M. to 5:00 P.M. CT for their corporate office and 8:00 A.M. to 5:00 P.M. PT for their regional office.
What are the key features of Minerallac Company products?
Minerallac Company products feature a comprehensive range of electrical fasteners and hardware with exceptional versatility, including over 1,000 different sizes, styles, and finishes. Key features include multiple product lines such as Traditional, Strut Fittings, and Stainless Steel options with specialized finishes like 304/316 Stainless Steel, Hot-Dipped Galvanized, and Zinc Electroplate. Their products are engineered for electrical contractors, offering time-saving solutions with high-quality fasteners designed for durability, corrosion resistance, and worker safety across various installation environments.
What environmental ratings do Minerallac Company products have?
Minerallac Company products have robust environmental ratings, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13 certifications, CSA Type 1-4X, 12, and 13 ratings, and IEC 60529 IP66 protection. The products are WEEE and RoHS compliant, with UV and oil resistance, and can operate in extreme temperatures ranging from -55°C to 105°C, making them suitable for harsh industrial environments.
What accessories are available for Minerallac Company products?
Minerallac Company offers a comprehensive range of accessories across multiple product categories, including hardware, fasteners, and mounting solutions. Key accessories include stove bolts with nuts, wing nut washers, bar joist washers, stud clip adapters, brackets, perforated strapping, cable support options like J-hooks and bridle rings, box mounting brackets, outlet retainers, and various stud and drywall supports. Their accessories are available in multiple finishes such as stainless steel, hot-dipped galvanized, zinc electroplate, and powder-coated options.
How are Minerallac Company products typically installed?
Minerallac Company products are typically installed using a variety of specialized fastening solutions, including conduit hangers, straps, beam clamps, and mounting brackets designed for different electrical and construction applications. Installation methods vary by product type, with options for metal studs, drywall, beams, acoustical surfaces, and low voltage systems. The company offers multiple installation styles such as one-hole and two-hole straps, universal beam clamps, and specific mounting hardware to ensure secure and efficient attachment across diverse electrical and construction environments.
What communication protocols do Minerallac Company products support?
Minerallac Company's Brad product line supports multiple industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, Serial, AS-interface, and CC-Link. Their comprehensive portfolio covers over 40 industrial protocols, providing flexible communication solutions for various industrial automation applications from PC-based control to PLC systems.