Contact for Pricing
Overview
- Self-drilling plastic anchors install directly into drywall without pre-drilling.
- One-piece design simplifies installation and reduces labor time.
- Anchor expands behind the wall for a secure, vibration-resistant hold.
- Kit includes 40 #8 x 1-1/2" SnapSkru anchors and 40 matching screws.
- Suitable for mounting fixtures, electrical boxes, and lightweight shelving.
Specifications
Application | Drywall;Vertical |
Diameter | 5/8 in |
Embedment Depth, Minimum | 1-5/8 in |
Finish | White Anchor: Zinc Screw |
Fixture Thickness | #8 |
Head Type | Slot/Phil Pan Head |
Length | 1-5/8: 1-1/2 Screw in |
Material | Plastic Anchor: Steel Screw |
Material | Plastic |
Minimum Embedment Depth | 1-5/8" |
Mounting Type | Hollow Wall |
Point Type | Sheet Metal |
Screw Size | #8 x 1-1/2" IN |
Series | Toggler Snapskru |
Size | #8 x 1-5/8" IN |
Size | #8 X 1-1/2" |
Special Features | SnapSkru™ #8 Self Drilling Drywall Anchor: #8 x 1-1/2" Phil/Slot PHS kit |
Thread Length | 1-1/2 IN |
Type | Self Drilling Drywall Anchor |
Package Weight (Imperial) | 0.6 lbs |
39933J
This is a SnapSkru self-drilling drywall anchor kit for drywall and vertical applications. The kit includes 40 anchors and 40 #8 x 1-1/2 in. screws in a jar. The anchor is plastic with a white finish, and the screw is steel with a zinc finish.
SHSK1
Hurricane/ Window/ Door Shutter Screw Kit, 84 piece(s), Plastic, Stainless Steel cap material, including a(n) (20) 1/4 in. Flat Washers, (20) 1/4-20 in. x 1 in. Machine Screws and (10) 2 in. Hurricane Wood Anchors (SS Cap), Installation Instruction Sheet and (1) Concrete Driver, (1) Wood Driver and (20) 1/4-20 in. x 1-1/2 in. Machine Screws, (10) 1-1/4 in. Hurricane Concrete Anchors (SS Cap) and (1) 3/16 in. Carbide Tipped Drill Bit
51-212HX
Anchor Kit, (100) #12 Anchors, (100) 10 x 1 Inch Hex-Slotted Screws, (1) 1/4 Inch Carbide Tip Drill Bit
39921
This is a hollow wall anchor kit with a white nylon anchor and zinc-plated carbon steel screw. It is sized #8 x 1-5/8" overall, with a 1/2" diameter anchor and 1" screw length. The anchor is intended for drywall and horizontal applications and is removable. It is listed for 3/8", 1/2", or 5/8" wall board and has a holding weight of 50 lbs.
60602
A lag screw shield for mortar joint applications. It is made of zinc with no additional finish. The shield is 1/4 in diameter, 1 in long, and uses a 1/2 in drill size with a 1/4 in screw size. Minimum embedment depth is 1-1/2 in.
60606
A two-piece lag screw shield made of two semi-cylindrical hollow sections that interlock at the top and expand when installed. It is made of zinc with no additional finish. The shield measures 5/16 in diameter, 1-1/4 in length, and requires a 1/2 in drill size with a 5/16 in screw size.
60608
Lag screw shield for mortar joint applications. It is made of zinc with no additional finish. The shield is 5/16 in. diameter and 1-3/4 in. long, with a 1/2 in. drill size and 2-1/4 in. minimum embedment depth.
60802
A lead screw anchor for use with wood screws, lags, and tapping screws in light-duty applications. It is designed for brick, block, drywall, masonry, or concrete and will conform to irregular, out-of-round holes. The anchor is made of lead alloy and measures 3/4 in. long with a #6-8 diameter and 1/4 in. drill size.Frequently Asked Questions
What type of wall is the SnapSkru anchor designed for?
The SnapSkru anchor is designed for hollow wall applications, specifically for drywall mounting.
Does the SnapSkru anchor require pre-drilling?
No, the SnapSkru anchor is self-drilling and installs directly into drywall without the need for pre-drilling.
What size screws are included with the SnapSkru anchor kit?
The kit includes 40 #8 x 1-1/2" screws that are compatible with the SnapSkru anchors.
What are the drive types for the included screws?
The included screws have both Phillips and slotted drive types.
Can the SnapSkru anchor be reused after removing the screw?
Yes, you can remove the screw and item, leaving the anchor in the wall for future reuse.
How to Install the Minerallac 39933 SnapSkru Anchor Kit
Step-by-step guide for installing TOGGLER SnapSkru anchors in drywall.
Estimated time: 5m
Tools needed:
Screwdriver (Phillips or Slotted)
Supplies needed:
Minerallac 39933 SnapSkru Anchor Kit
- Drive the anchor
Drive the SnapSkru anchor clockwise into the drywall until the anchor head is flush with the wall surface.
- Position the item and insert screw
Place the item you wish to mount over the installed anchor and insert the provided screw through the item and into the anchor.
- Tighten the screw
Tighten the screw until it is flush with the item. The screw action will open the anchor behind the wall, creating a secure lock.
Frequently Asked Questions about Minerallac Company
What are the main product lines offered by Minerallac Company?
Minerallac Company offers multiple comprehensive product lines including Minerallac Traditional (electrical fasteners), Strut Fittings, Stainless Steel Fasteners, Black Claw, Impact Staples, and Redmore. Their Traditional line features over a thousand electrical fastener variations covering conduit/cable/wire products, nail straps, beam clamps, metal stud & drywall accessories, acoustical supports, voice/data hardware, and miscellaneous electrical installation components.
What is Minerallac Company's warranty policy?
Minerallac Company provides a limited warranty that guarantees all products are free from defects in material and workmanship. If a product fails to meet this warranty, Minerallac's sole liability is to replace the product at no charge. The warranty is exclusive and does not cover consequential damages, lost profits, or implied warranties of merchantability or fitness for a particular purpose.
What industries and applications are Minerallac Company products used for?
Minerallac Company products are used extensively across electrical, construction, and industrial applications, including conduit and cable support, beam mounting, metal stud and drywall installation, voice/data infrastructure, and low voltage systems. Their product lines cover critical fastening solutions for electrical contractors, with specialized offerings in conduit hangers, straps, beam clamps, cable supports, and mounting hardware for various industrial environments.
What technical support does Minerallac Company offer?
Minerallac Company offers comprehensive technical support through multiple channels, including a toll-free customer service line at 800-927-3293, email support at [email protected], and online resources at www.minerallac.com. Their support covers product selection, technical specifications, and customer service for their extensive line of electrical fasteners, hangers, straps, and hardware across multiple product brands including Minerallac Traditional, Cully, Black Claw, IMPACT Staples, and Minerallac Stainless Steel. Support hours are 8:00 A.M. to 5:00 P.M. CT for their corporate office and 8:00 A.M. to 5:00 P.M. PT for their regional office.
What are the key features of Minerallac Company products?
Minerallac Company products feature a comprehensive range of electrical fasteners and hardware with exceptional versatility, including over 1,000 different sizes, styles, and finishes. Key features include multiple product lines such as Traditional, Strut Fittings, and Stainless Steel options with specialized finishes like 304/316 Stainless Steel, Hot-Dipped Galvanized, and Zinc Electroplate. Their products are engineered for electrical contractors, offering time-saving solutions with high-quality fasteners designed for durability, corrosion resistance, and worker safety across various installation environments.
What environmental ratings do Minerallac Company products have?
Minerallac Company products have robust environmental ratings, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13 certifications, CSA Type 1-4X, 12, and 13 ratings, and IEC 60529 IP66 protection. The products are WEEE and RoHS compliant, with UV and oil resistance, and can operate in extreme temperatures ranging from -55°C to 105°C, making them suitable for harsh industrial environments.
What accessories are available for Minerallac Company products?
Minerallac Company offers a comprehensive range of accessories across multiple product categories, including hardware, fasteners, and mounting solutions. Key accessories include stove bolts with nuts, wing nut washers, bar joist washers, stud clip adapters, brackets, perforated strapping, cable support options like J-hooks and bridle rings, box mounting brackets, outlet retainers, and various stud and drywall supports. Their accessories are available in multiple finishes such as stainless steel, hot-dipped galvanized, zinc electroplate, and powder-coated options.
How are Minerallac Company products typically installed?
Minerallac Company products are typically installed using a variety of specialized fastening solutions, including conduit hangers, straps, beam clamps, and mounting brackets designed for different electrical and construction applications. Installation methods vary by product type, with options for metal studs, drywall, beams, acoustical surfaces, and low voltage systems. The company offers multiple installation styles such as one-hole and two-hole straps, universal beam clamps, and specific mounting hardware to ensure secure and efficient attachment across diverse electrical and construction environments.
What communication protocols do Minerallac Company products support?
Minerallac Company's Brad product line supports multiple industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, Serial, AS-interface, and CC-Link. Their comprehensive portfolio covers over 40 industrial protocols, providing flexible communication solutions for various industrial automation applications from PC-based control to PLC systems.