Mersen STXP600Y10 The Surge-Trap® Type 1 STXP Series offers advanced performance and features over the…
Alternate Item Number: STXP600Y10
UPC: 782001470548
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 100 kA surge capacity per phase for extended lifespan and higher impulse withstand
- TPMOV® technology with internal fusing for enhanced safety and no additional overcurrent protection required
- Supports up to 10 modes of protection: L-N, L-L, L-G, N-G
- LED status indicators for each phase (Green = Functional, OFF = Replace; ON = Operational, OFF = Maintenance Required)
- LED status indicators for phase operational status and phase loss
Specifications
Application | Service entrance at low to medium risk exposure level Commercial and Industrial Distribution Panels Control Panels |
Brand Name | Mersen |
Connection | Pre-wired with 3 ft 12 AWG conductors |
Connection | Pre-wired |
Connection Type | Screw Terminal |
Connection Type | Line or Load Side |
Connection Type | L-G, L-L, L-N, N-G |
Connection Type | Line or load side panel connection |
Connection Type | 10AWG leads |
Current Rating | 100kA/phase |
Current Rating | 100 kA |
Current Rating | 100 kA per phase |
Frequency | 60 Hz |
Frequency | 50-60 Hz |
Frequency Rating | 50/60 HZ |
Frequency Rating, Maximum | 60 Hz |
Frequency Rating, Minimum | 50 Hz |
Insulation | Polycarbonate |
Ip Rating | 4X |
Material | Polycarbonate |
Material | TPMOV® technology, NEMA 4X enclosure |
Material | TPMOV® technology |
Mounting | Panel or Wall Mount |
Mounting Type | Mounting feet, flush-mount capability |
Mounting Type | Flush-Mount |
Mounting Type | Panel Mount, Side Mount, Flush Mount |
Mounting Type | Mounting feet, Flush-mount |
Mounting Type | Mounting feet, Flush-mount, Side mounting |
Mounting Type | panel mounting, side mounting, flush-mount |
Mounting Type | Panel-mounted, side-mounted, flush-mount |
NEMA Rating | Type 1 |
Operating Temperature, Maximum | 185 F |
Operating Temperature, Maximum | 85 C |
Operating Temperature, Minimum | -40 F |
Operating Temperature, Minimum | -40 C |
Phase | 3- |
Poles | 3P+G |
Poles | 3-Phase Wye |
Series | Surge-Trap® Type 1 STXP |
Series | STXP |
Short Circuit Rating | 200 kA |
Short-Circuit Rating | 200 kA |
Size | 7.49 x 3.13 x 2.72;190.246 x 79.502 x 69.088 in;mm |
Special Features | Designed with the industry leading Mersen TPMOV® Technology (internally fused) Enhanced 100kA surge capacity for longer life and higher single impulse withstand LED status indicator (ON = Good, OFF = Replace) LED phase loss indicators (ON = Operational,OFF = Maintenance Required) NEMA 4X enclosure for outdoor or indoor use Mounting hub and mounting feet for installation flexibility Pre-wired with 3' leads for easy installation Optional flush-mount kit for in-wall installation Optional audible alarm and remote dry contacts For use in ANSI/UL Type 1 or 2 SPD installations Up to 10 Modes of Protection (L-N, L-L, L-G, N-G) 10-year warranty |
Special Features | Designed with industry leading Mersen TPMOV technology Fits 3/4" knockouts with 36" cable leads for easy installation Up to 10 Modes of Protection 10-year manufacturer’s warranty |
Standard | ANSI/UL 1449 5th Edition, Type 1 SPD, File E210793 CSA C22.2, Type 1 SPD ANSI/IEEE C62.41.1, C62.41.2, C62.45 UL96A Lightning Protection RoHS Compliant |
Standard | ANSI/UL 1449 4th Edition, Type 1 SPD, File E210793 CSA C22.2, Type 1 SPD ANSI/IEEE C62.41.1, C62.41.2, C62.45 UL96A Lightning Protection RoHS Compliant |
Type | NEMA UL CSA TYPE 1 |
Type of Indicators | LED |
UL SPD Type | Type 1 |
Voltage Rating | 600Y/347 V |
Package Dimensions (L x W x H) | 10.12 IN x 7.06 IN x 3.44 IN |
Package Dimensions (L x W x H) | 25.7048 cm x 17.9324 cm x 8.7376 cm |
Package Weight (Imperial) | 2.730 L |
Package Weight (Metric) | 1.238 kg |
CUSTOMDIN
DIN rail is a universal mounting option for electrical and industrial control products such as circuit breakers electrical supplies terminal blocks and more. The rail system is used to stabilize a wide variety of devices and products. Ordering pre-cut DIN rail helps increase productivity and decrease jobsite clutter. On-site Flexibility Streamline custom cuts DIN rail to any length so it is ready to use when it arrives on the jobsite. Additionally DIN rail can be easily removed if relocation is necessary. Features of Custom DIN Rail from Streamline - All cut DIN rail from Streamline is galvanized steel made to eliminate rusting. Streamline ensures that all custom DIN rail orders are: De-burred Custom Length Any quantity 1-1000+ Quick turnaround (typically 2 weeks or less from receipt of order) This mechanical support structure is a must for all electrical parts solutions big or small. DIN rail allows for mounting hardware easily and quickly. These durable and versatile rails make the perfect solution for all mounting applications. Save space time and money with these cost-effective mounting solutions. Order your custom cut DIN rail today!
3085
Super-Safeway® Multiple Outlet Box, Extended Depth, 2-Sided, F2 (1/2") Cord Grip Body, with Flip Lids for (2) Duplex Not Included
F62ERLNSNSNM002
OM1 2 fiber, 16mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std IL
CPP24FMWBLY
The Mini-Com Flush Mount Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack and can be identified with adhesive labels and is black.
CESUM3-C15
Membrane plate cable entry system offers a good strain relief while maintaining IP/NEMA ingress sealing rating. The CESUM3-C15 is a Rectangular Un-Terminated Cable Entry System, 4.1" (103 mm) Long, with 8 Openings 0.12" (3.0 mm) to 0.31" (8 mm), 3 Openings 0.20" (5.1 mm) to 0.35" (9.0 mm), 4 Openings 0.3" (7.5 mm) to 0.47" (12.0 mm). Color is Black. Standard Package Quantity is 1 PC.
UTP6AL1MBU
The TX6A™ 10Gig Cat 6A UTP Patch Cord is a 1-Meter, Blue cord constructed of 24 AWG, unshielded, twisted pair stranded, LSZH (60332-1) cable with high-performance modular plugs. Its MaTriX Tape Technology limits alien crosstalk, ensuring 10 Gb/s transmission. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.
Frequently Asked Questions
What is the operating temperature range for Mersen Surge-Trap devices?
The operating and storage temperature range for Mersen Surge-Trap devices is from -31ºF (–35ºC) to +185ºF (85ºC).
What is the surge current rating for the STZ series?
The STZ series offers surge current ratings from 100kA up to 450kA, with 450kA available for specific voltage configurations.
What is the warranty period for the STZ series Surge-Trap devices?
The Surge-Trap STZ series comes with a 15-year product warranty.
What is the warranty period for the STXT series Surge-Trap devices?
The Surge-Trap STXT series has a 10-year manufacturer's warranty.
What is the surge current rating for the STXP series?
The STXP series has a surge current rating of 100kA per phase.
What is the warranty period for the STXP series Surge-Trap devices?
The Surge-Trap STXP series comes with a 10-year manufacturer's warranty.
What is the surge current rating for the STXR series?
The STXR series has a surge current rating of 50kA per phase and per mode.
What is the warranty period for the STXR series Surge-Trap devices?
The Surge-Trap STXR series has a 5-year manufacturer's warranty.
What type of technology is used in Mersen Surge-Trap devices?
Mersen Surge-Trap devices utilize Thermally Protected MOV (TPMOV®) technology for improved surge protection and safety.
What is the response time for Mersen Surge-Trap devices?
The response time for Mersen Surge-Trap devices is less than 1 nanosecond per phase.
How to Install the STXP600Y10 Surge Protective Device
This guide provides step-by-step instructions for the installation and initial setup of the STXP600Y10 Surge Protective Device (SPD) to protect your equipment from transient overvoltages.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors
- Confirm system compatibility
Verify that the system voltage and configuration match the SPD voltage and configuration before proceeding with the installation.
- Turn off power
Ensure all power supplying the equipment is turned off and confirm that the equipment and all sources are de-energized to prevent electrical shock.
- Determine mounting location
Select a mounting location for the SPD that is as close to the equipment as possible, ensuring that the LED status indicator will be visible and that leads are kept straight and short.
- Mount the SPD
Securely mount the SPD to the designated location using the appropriate mounting screws, ensuring it is level and firmly attached.
- Make electrical connections
Connect the SPD according to the wiring diagram provided, trimming leads to the shortest length possible and avoiding sharp bends or loops.
- Energize the system
Turn the power back on and confirm the proper operation of the SPD by checking the green LED status indicator. If the LED is off, further investigation is needed.
Frequently Asked Questions about Mersen
What industries and applications are Mersen products used for?
Mersen products are used across diverse industrial sectors including solar power, electric vehicles, buildings/construction, industrial automation, power distribution, HVAC, elevators, telecommunications, and specialty manufacturing. Key application areas include circuit protection, surge protection, battery module protection, electrical safety systems, and power management for residential, commercial, and utility-scale installations.
What are the main product lines offered by Mersen?
Mersen offers five primary electrical power product lines: IEC and UL/CSA Fuses and Fusegear, Surge Protection, Low Voltage Disconnect Switches, Power Distribution Blocks, and Engineered Solutions. Their comprehensive range includes specialized components like high-speed fuses, modular fuse holders, surge arresters, and custom-engineered electrical protection systems for industrial and power management applications.
What are the key features of Mersen products?
Mersen products feature advanced electrical protection and power management solutions with key characteristics including finger-safe design, compact modularity, and high-performance safety features. Their product lines span electrical power components like fuses, surge protection, power distribution blocks, and specialized solutions for industrial, solar, and building applications. Critical features include UL/CSA approvals, high short-circuit current ratings, and innovative technologies like the Fuse Control™ program that minimize electrical risks and optimize system performance.
What environmental ratings do Mersen products have?
Mersen products meet rigorous environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13, CSA Type 1, 2, 3, 4, 4X, 12, and 13, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They feature IEC 60529 IP66 protection, with enhanced UV inhibitors for outdoor weathering and operating temperatures ranging from -40°C to 130°C (-40°F to 266°F). These ratings ensure superior protection in wet, corrosive, and challenging industrial environments.
What accessories are available for Mersen products?
Mersen offers multiple accessories for their fuse blocks and systems, including safety pullers (DFC3M and DFC3LP), DIN-rail adapters (DRM), bus bars, auxiliary contacts, and specialized mounting hardware. Key accessories include the DFC3M safety puller for 1-1/2" x 13/32" midget or Class CC fuses, the DRM adapter for mounting 303 series fuse blocks on DIN-rail, and UltraSafe fuse module accessories like bus bars and auxiliary contacts that enable module interconnection and monitoring.
How are Mersen products typically installed?
Mersen products are typically installed in electrical distribution systems, control panels, and industrial automation environments using multiple mounting options. These include service entrance panel mounting, distribution panel installation, control panel DIN rail mounting, and custom engineered solutions like Fused Coordination Panelboards. Installation depends on the specific product type, such as fuses, surge protective devices, or switches, and is designed to provide electrical protection and circuit safety in various industrial and commercial applications.
What certifications and standards do Mersen products comply with?
Mersen products are certified to multiple international standards, including UL (Underwriters Laboratories), CSA (Canadian Standards Association), CCC (China Compulsory Certification), and EAC (Eurasian Conformity). Our products meet rigorous safety and performance standards for industrial applications across North America, China, Russia, and other global markets, ensuring compliance and reliability in electrical power and advanced materials solutions.
What technical support does Mersen offer?
Mersen provides comprehensive technical support through multiple channels, including technical experts located in your time zone who can assist with product selection, application guidance, and troubleshooting. Their Fuse Control™ program offers a free Fuse Inventory Audit & Analysis, and customers can access technical resources through their sales representatives and online platform ep.mersen.com.