Mersen STXP600D05 The Surge-Trap® Type 1 STXP Series offers advanced performance and features over the…
Alternate Item Number: STXP600D05
UPC: 782001470531
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 600V, 3-phase Delta system protection with 50 kA per phase surge capacity
- TPMOV® technology eliminates need for additional overcurrent protection
- Pre-wired 3-foot leads for simplified installation
- Up to 10 modes of protection (L-N, L-L, L-G, N-G)
- Phase LED status indicators and optional remote monitoring
Specifications
Application | Service entrance at low to medium risk exposure level Commercial and Industrial Distribution Panels Control Panels |
Brand Name | Mersen |
Connection | Pre-wired |
Connection | Pre-wired with 3 ft 12 AWG conductors |
Connection Type | Line or Load Side |
Frequency | 50-60 Hz |
Frequency Rating | 50/60 HZ |
Frequency Rating, Maximum | 60 Hz |
Frequency Rating, Minimum | 50 Hz |
Insulation | Polycarbonate |
Material | TPMOV |
Material | Polycarbonate |
Mounting | Panel or Wall Mount |
Mounting Type | Panel Mount, Side Mount, Flush Mount |
Mounting Type | Mounting feet, Flush-mount |
Mounting Type | panel mounting, side mounting, flush-mount |
Nema Rating | NEMA 4X |
Operating Temperature, Maximum | 185 F |
Operating Temperature, Maximum | 85 C |
Operating Temperature, Minimum | -40 F |
Operating Temperature, Minimum | -40 C |
Phase | 3- |
Poles | 3-Phase Delta |
Series | STXP |
Short Circuit Rating | 200 kA |
Short-Circuit Rating | 200 kA |
Size | 7.49 x 3.13 x 2.72;190.246 x 79.502 x 69.088 in;mm |
Special Features | Designed with industry leading Mersen TPMOV technology Fits 3/4" knockouts with 36" cable leads for easy installation Up to 10 Modes of Protection 10-year manufacturer’s warranty |
Special Features | Designed with the industry leading Mersen TPMOV® Technology (internally fused) Enhanced 100kA surge capacity for longer life and higher single impulse withstand LED status indicator (ON = Good, OFF = Replace) LED phase loss indicators (ON = Operational,OFF = Maintenance Required) NEMA 4X enclosure for outdoor or indoor use Mounting hub and mounting feet for installation flexibility Pre-wired with 3' leads for easy installation Optional flush-mount kit for in-wall installation Optional audible alarm and remote dry contacts For use in ANSI/UL Type 1 or 2 SPD installations Up to 10 Modes of Protection (L-N, L-L, L-G, N-G) 10-year warranty |
Standard | ANSI/UL 1449 4th Edition, Type 1 SPD, File E210793 CSA C22.2, Type 1 SPD ANSI/IEEE C62.41.1, C62.41.2, C62.45 UL96A Lightning Protection RoHS Compliant |
Standard | ANSI/UL 1449 5th Edition, Type 1 SPD, File E210793 CSA C22.2, Type 1 SPD ANSI/IEEE C62.41.1, C62.41.2, C62.45 UL96A Lightning Protection RoHS Compliant |
Type | NEMA UL CSA TYPE 1 |
Type Of Indicators | LED |
UL SPD Type | Type 1 |
Voltage Rating | 600 V |
Package Weight (Imperial) | 2.600 L |
Package Weight (Metric) | 1.179 kg |
CUSTOMDIN
DIN rail is a universal mounting option for electrical and industrial control products such as circuit breakers electrical supplies terminal blocks and more. The rail system is used to stabilize a wide variety of devices and products. Ordering pre-cut DIN rail helps increase productivity and decrease jobsite clutter. On-site Flexibility Streamline custom cuts DIN rail to any length so it is ready to use when it arrives on the jobsite. Additionally DIN rail can be easily removed if relocation is necessary. Features of Custom DIN Rail from Streamline - All cut DIN rail from Streamline is galvanized steel made to eliminate rusting. Streamline ensures that all custom DIN rail orders are: De-burred Custom Length Any quantity 1-1000+ Quick turnaround (typically 2 weeks or less from receipt of order) This mechanical support structure is a must for all electrical parts solutions big or small. DIN rail allows for mounting hardware easily and quickly. These durable and versatile rails make the perfect solution for all mounting applications. Save space time and money with these cost-effective mounting solutions. Order your custom cut DIN rail today!
3085
Super-Safeway® Multiple Outlet Box, Extended Depth, 2-Sided, F2 (1/2") Cord Grip Body, with Flip Lids for (2) Duplex Not Included
F62ERLNSNSNM002
OM1 2 fiber, 16mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std IL
CPP24FMWBLY
The Mini-Com Flush Mount Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack and can be identified with adhesive labels and is black.
CESUM3-C15
Membrane plate cable entry system offers a good strain relief while maintaining IP/NEMA ingress sealing rating. The CESUM3-C15 is a Rectangular Un-Terminated Cable Entry System, 4.1" (103 mm) Long, with 8 Openings 0.12" (3.0 mm) to 0.31" (8 mm), 3 Openings 0.20" (5.1 mm) to 0.35" (9.0 mm), 4 Openings 0.3" (7.5 mm) to 0.47" (12.0 mm). Color is Black. Standard Package Quantity is 1 PC.
UTP6AL1MBU
The TX6A™ 10Gig Cat 6A UTP Patch Cord is a 1-Meter, Blue cord constructed of 24 AWG, unshielded, twisted pair stranded, LSZH (60332-1) cable with high-performance modular plugs. Its MaTriX Tape Technology limits alien crosstalk, ensuring 10 Gb/s transmission. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.
Frequently Asked Questions
What voltage range does the STXP600D05 support?
The device operates on 120–600VAC systems.
What is the surge capacity of the STXP600D05?
The surge capacity is 100 kA, with a 50 kA per phase rating.
Does the STXP600D05 require additional overcurrent protection?
No, the TPMOV® technology eliminates the need for additional overcurrent protection.
What standards does the STXP600D05 meet?
The device meets ANSI/UL 1449 4th Edition, Type 1 SPD, CSA C22.2, Type 1 SPD, IEEE C62.41.1, C62.41.2, C62.45, and UL96A Lightning Protection standards.
Can the STXP600D05 be installed on the load side of a panel?
Yes, the device can be installed on either the line or load side of a panel.
What are the LED indicators for on the STXP600D05?
Green LEDs indicate functional status per phase; OFF indicates replacement is needed. Phase loss indicators show operational status.
How to Install the STXP600D05 Surge Protective Device
This guide provides step-by-step instructions for installing the STXP600D05 Surge Protective Device to ensure optimal performance and safety.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors, Watertight fittings (if applicable)
- Turn off power
Ensure all power supplying the equipment is turned off and confirm that all sources are de-energized before proceeding.
- Confirm system compatibility
Verify that the system voltage and configuration match the specifications of the STXP600D05 Surge Protective Device.
- Determine mounting location
Select a mounting location as close to the equipment as possible, ensuring the LED status indicator will be visible.
- Mount the device
Securely mount the STXP600D05 to the designated surface using appropriate mounting screws. Ensure it is level and firmly attached.
- Make electrical connections
Connect the device according to the wiring diagram, ensuring leads are trimmed to the shortest length possible and avoiding sharp bends.
- Energize the system
Turn the power back on and confirm the proper operation of the green LED status indicator. If the LED is off, check connections and troubleshoot as necessary.
Frequently Asked Questions about Mersen
What industries and applications are Mersen products used for?
Mersen products are used across diverse industrial sectors including solar power, electric vehicles, buildings/construction, industrial automation, power distribution, HVAC, elevators, telecommunications, and specialty manufacturing. Key application areas include circuit protection, surge protection, battery module protection, electrical safety systems, and power management for residential, commercial, and utility-scale installations.
What are the main product lines offered by Mersen?
Mersen offers five primary electrical power product lines: IEC and UL/CSA Fuses and Fusegear, Surge Protection, Low Voltage Disconnect Switches, Power Distribution Blocks, and Engineered Solutions. Their comprehensive range includes specialized components like high-speed fuses, modular fuse holders, surge arresters, and custom-engineered electrical protection systems for industrial and power management applications.
What are the key features of Mersen products?
Mersen products feature advanced electrical protection and power management solutions with key characteristics including finger-safe design, compact modularity, and high-performance safety features. Their product lines span electrical power components like fuses, surge protection, power distribution blocks, and specialized solutions for industrial, solar, and building applications. Critical features include UL/CSA approvals, high short-circuit current ratings, and innovative technologies like the Fuse Control™ program that minimize electrical risks and optimize system performance.
What environmental ratings do Mersen products have?
Mersen products meet rigorous environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13, CSA Type 1, 2, 3, 4, 4X, 12, and 13, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They feature IEC 60529 IP66 protection, with enhanced UV inhibitors for outdoor weathering and operating temperatures ranging from -40°C to 130°C (-40°F to 266°F). These ratings ensure superior protection in wet, corrosive, and challenging industrial environments.
What accessories are available for Mersen products?
Mersen offers multiple accessories for their fuse blocks and systems, including safety pullers (DFC3M and DFC3LP), DIN-rail adapters (DRM), bus bars, auxiliary contacts, and specialized mounting hardware. Key accessories include the DFC3M safety puller for 1-1/2" x 13/32" midget or Class CC fuses, the DRM adapter for mounting 303 series fuse blocks on DIN-rail, and UltraSafe fuse module accessories like bus bars and auxiliary contacts that enable module interconnection and monitoring.
How are Mersen products typically installed?
Mersen products are typically installed in electrical distribution systems, control panels, and industrial automation environments using multiple mounting options. These include service entrance panel mounting, distribution panel installation, control panel DIN rail mounting, and custom engineered solutions like Fused Coordination Panelboards. Installation depends on the specific product type, such as fuses, surge protective devices, or switches, and is designed to provide electrical protection and circuit safety in various industrial and commercial applications.
What certifications and standards do Mersen products comply with?
Mersen products are certified to multiple international standards, including UL (Underwriters Laboratories), CSA (Canadian Standards Association), CCC (China Compulsory Certification), and EAC (Eurasian Conformity). Our products meet rigorous safety and performance standards for industrial applications across North America, China, Russia, and other global markets, ensuring compliance and reliability in electrical power and advanced materials solutions.
What technical support does Mersen offer?
Mersen provides comprehensive technical support through multiple channels, including technical experts located in your time zone who can assist with product selection, application guidance, and troubleshooting. Their Fuse Control™ program offers a free Fuse Inventory Audit & Analysis, and customers can access technical resources through their sales representatives and online platform ep.mersen.com.