Macromatic
VAE120A
Contact for Pricing
Overview
- Monitors 12-120V AC single-phase voltage
- Adjustable overvoltage (120-150V) and undervoltage (90-120V) ranges
- SPDT contacts rated 10A @ 240V AC/30V DC, 1/2HP @ 240V AC
- Response times: 0.1-10 sec adjustable, 2 sec fixed power-up delay
- Operates from -28°C to 65°C (-20°F to 150°F), <3VA burden
PLM9405
The PLM Series is a 3-phase voltage monitor that continuously monitors each of the three phases. Monitors both delta and wye systems and no connection to neutral is required. The microcontroller circuit design protects against undervoltage, voltage unbalance, phase loss and phase reversal. Protection is assured when regenerated voltages are present. Operation: The output relay is energized and the LED glows green when all voltages are acceptable and the phase sequence is correct. Under and unbalanced voltages must be sensed for a continuous trip delay period before the relay de-energizes. Reset is automatic upon correction of the fault condition. The output relay will not energize if a fault condition is sensed as power is applied. The LED flashes red during the trip delay, then glows red when the output de-energizes. The LED flashes green/red if phase reversal is sensed. Field Adjustment: Set voltage adjustment knob at the desired operating line voltage for the equipment. This adjustment automatically sets the undervoltage trip point. Apply power. If the PLM fails to energize, (LED glows red) check wiring of all 3 phases, voltage, and phase sequence. If phase sequence is incorrect, the LED flashes green/red. To correct this, swap any two line voltage connections at the mounting socket. No further adjustment should be required.
PMDU
Three Phase Monitor Relay; DIN-Mount; 190-500V; 10A DPDT; Phase Loss; Reversal; Unbalance; Under/Over Voltage
Frequently Asked Questions
What do VxE voltage monitoring relays protect against?
VxE voltage monitors protect against damage and downtime by supervising AC or DC voltage levels, detecting undervoltage and overvoltage conditions.
What types of equipment can VxE relays protect?
These relays protect motors, compressors, pumps, and sensitive controls by detecting abnormal line conditions before they cause failure.
How are VxE relays mounted?
The VxE voltage monitoring relays are 17.5MM DIN-rail mounted, simplifying panel integration.
Can VxE relays be tuned to ignore short voltage disturbances?
Yes, with adjustable trip points and time delays, these relays can be tuned to ride through short disturbances.
Are VxE relays compatible with other control components?
Yes, they are compatible with motor starters, contactors, and PLC inputs for simple control integration.
What is the physical size of the VxE voltage monitoring relays?
The VxE voltage monitoring relays have a compact 17.5MM DIN-rail mounted design.
What are the key features of VxE voltage monitoring relays?
Features include continuous monitoring, adjustable trip thresholds and time delays, a compact DIN-rail form factor, and LED status indication.
What applications are VxE voltage monitoring relays suitable for?
They are suitable for HVAC, water/wastewater, industrial processing, commercial buildings, agriculture, irrigation, and generator/ATS systems.
How do VxE relays help with troubleshooting?
The relays feature clear LED status indication for quick troubleshooting of voltage conditions.
Are custom functions or timing settings available for VxE relays?
Yes, custom functions and timing settings are available upon inquiry.
Frequently Asked Questions about Macromatic
What certifications and standards do Macromatic products comply with?
Macromatic products are certified with ULus and cULus approvals for use in the United States and Canada, covering a wide range of industrial control products. Their product line includes UL-listed devices for various voltage ranges (120V, 208-277V) and NEMA enclosure types, ensuring compliance with North American industrial standards.
What industries and applications are Macromatic products used for?
Macromatic products are used across multiple critical industrial sectors, including water/wastewater, pump and motor control, irrigation, oil and gas, HVACR, material handling, lifts and elevators, and other systems requiring process control and protection. Their industrial control products deliver high-quality monitoring, control, and protection solutions for electrical processes and equipment fault protection.
What technical support does Macromatic offer?
Macromatic offers comprehensive technical support through multiple channels, including a dedicated online Technical Resource Center at macromatic.com/technical-support and direct contact with technical advisors. Their support includes engineering assistance for unique applications, help with product selection, custom-engineered solutions, and troubleshooting for product setup. Customers can reach out via their website contact form or contact their technical team directly to get expert guidance on their industrial control products.
What are the main product lines offered by Macromatic?
Macromatic offers a comprehensive range of industrial control, monitoring, and protection products across multiple product lines, including Alternating Relays, Current Sensing Relays, General Purpose Relays, Intrinsically Safe Barrier Relays, Liquid Level Control Relays, Voltage Monitor Relays, and Time Delay Relays. These products serve critical applications in industries such as water/wastewater, pump and motor control, irrigation, oil and gas, HVACR, material handling, and lift systems.
What are the key features of Macromatic products?
Macromatic products feature innovative industrial control solutions with key characteristics including precise time-based control, compact design, and comprehensive protection capabilities. Their product lines cover voltage monitoring, time delay relays, and control products for multiple industries like water/wastewater, pump and motor control, oil and gas, and HVACR. Standout features include space-saving designs, multiple time delay functions, voltage band protection, and customizable solutions with quick prototype turnaround.
What accessories are available for Macromatic products?
Macromatic offers a comprehensive line of accessories for their industrial control products, including industry-standard sockets (8-pin, 11-pin octal, and 12-pin square), back-mounted sockets for panel mounting, retainers, hold-down springs, terminal covers, and replacement terminals. These accessories are designed to simplify relay installation, replacement, and provide additional mounting and protection options for Macromatic products.
How are Macromatic products typically installed?
Macromatic products are typically installed using industry-standard 8-pin and 11-pin octal sockets, as well as 12-pin square sockets that simplify relay installation. These sockets allow for easy mounting, with back-mounted socket options enabling flange-style enclosures to be panel mounted. Additional installation accessories like retainers, hold-down springs, terminal covers, and replacement terminals are available to support precise and secure product installation.
What communication protocols do Macromatic products support?
Macromatic communication modules support multiple industrial communication protocols, including Modbus RTU, Modbus TCP/IP, PROFIBUS, PROFINET, DeviceNet, EtherNet/IP, and IEC 61850. These protocols enable flexible network integration across industrial automation systems, providing comprehensive connectivity and communication capabilities for diverse industrial applications.
What environmental ratings do Macromatic products have?
Macromatic products feature robust environmental ratings across multiple NEMA and IP standards. Most product lines offer NEMA Type 3R, 4, and 4X ratings, with specific models providing protection against dust, water, and corrosion for both indoor and outdoor applications. Select product series like DS20, DS30, DR30, and DR50 come standard as 3R with optional 4X upgrades available.